WeTek WRBV210 User manual

Remote control key function
1. Bluetooth key table
In the Bluetooth connection state, the key for the Bluetooth button is the
Android defined key value, which is the standard keyboard HID key value. In
addition to the standby button for the infrared button, the rest of the keys are
Bluetooth keys.
Default System Code: 0x8877 Send Format: NEC6122
Key value: reference USB_HID standard Keyboard (0x07) common key, if no
common key, using undefined.
KEY
BT CODE
IR CODE
NOTES
Power
0xf1
IR
Microphone
0x0221(0C)
BT
0x34
Red
0x3A
0x0E
BT（defined by
yourselves）
Green
0x3B
0x1E
BT（defined by
yourselves）
Yellow
0x3C
0x4C
BT（defined by
yourselves）
Blue
0x3D
0x44
BT（defined by
yourselves）
Back
0x0224(0C)
0xc5
BT
Home
0x0223(0C)
0x88
BT

Up
0x0042(0C)
0xCA
BT
Down
0x0043(0C)
0xd2
BT
Left
0x0044(0C)
0x99
BT
Right
0x0045(0C)
0xC1
BT
OK
0x0041(0C)
0xCE
BT
CH+
0x9C
0x08
BT（defined by
yourselves）
CH-
0x9D
0x04
BT（defined by
yourselves）
Vol+
0x0080(07)
0x80
BT
Vol-
0x0081(07)
0x81
BT
Menu
0x65(07)
0x82
BT
1
0x1E(0x07)
0x11
BT
2
0x1F(0x07)
0x12
BT
3
0x20(0x07)
0x13
BT
4
0x21(0x07)
0x14
BT
5
0x22(0x07)
0x15
BT
6
0x23(0x07)
0x16
BT
7
0x24(0x07)
0x17
BT
8
0x25(0x07)
0x18
BT
9
0x26(0x07)
0x19
BT
0
0x27(0x07)
0x10
BT
Mute
0x7F(0x07)
0x0C
BT
Delete
0x2A(0x07)
0xDF
BT
LINK
0xBD
IR(Press and
hold the key

combination
when sent)
2. Remote control operation instructions
1, when connected to the set-top box Bluetooth, remote control Bluetooth key;
not connected to the Bluetooth module, the infrared key value. The "standby"
key always sends the infrared key.
2, infrared state: hold the button to continue to launch the code value, send a
light flash, until the bounce or a minute after the stop;
Bluetooth state: press and hold the button to launch a key, the indicator light
continues until the pop-up button or a minute after the launch stop.
Insufficient battery charge Reminder: When the power is below 2.4V, the
indicator light flashes quickly, as long as it is still in operation, it will remain
blinking, when no longer on the remote control operation, flashing 5 times or
flashing for 3 seconds, stop flashing And extinguished.
3, the pairing function: while holding down the "Home" and "menu" button and
for three seconds, send a virtual button pair only send infrared key value,
while the indicator light flashes.
4, support the Bluetooth remote control online upgrade, the box automatically
detects the power supply remote version, the version is lower than the server
push version automatically upgrade.
5, Bluetooth device name: WeMote.

Appearance view
Model: WRBV210
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the follow¬ing two
conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.