Model # WMCXL-3
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Mfg. Inc. Page 10 Factory No. 33-10944
Assembly Instructions for Table Top
14.Put the Suction Cups (1) firmly into top holes of the Middle Shelf Frame (B) and Bottom Shelf
Frame (C) as shown in detail #6.
15.Screw 8 Glass Raisers (10) onto the top holes of Top Shelf Frame (A) and both Legs (E and
F). Make sure they go all the way in. See detail #6.
16.Place Top Glass (G) and Glass Shelves (H) in place starting from the Bottom Glass Shelf as
shown in detail #6. Make sure the glass is properly centered and the black side of glass is
down. Push each glass all the way back against the Spine. Also, be sure to press down
evenly and firmly each glass onto the Suction Cups or Glass Raisers to make sure they
securely rest onto the Suction Cups.
Note: Make sure that the Suction Cups go all the way into the pre-drilled holes to prevent the
glass shelf from falling and getting damage. If glass is scratched you can minimize the
damage by using a BLACK marker and filling in scratched area from underneath.
Required hardware in this step
Description: (1) Suction Cup (10) Glass Raiser
Sketch
Qty. (12 pcs) (8 pcs)
Tools required: No tool required
