argon audio Radio 1 User manual

www.argonaudio.com
Radio1, 2 and 3 Quick start
We care about the Environment
By refraining from inserting a full printed manual with our
Argon Audio products we save more than 20 tons of paper
each year. You can find a full User Manual in PDF format for
this product on; www.argonaudio.com
See back side of this insert for Quick start guide
Safety
Safety Instructions
•Unplug this product from the wall outlet before cleaning.
Do not use this product near water or moisture. Do not
spill liquids on the product. Clean only with a dry cloth.
•Place the unit on a solid surface.
•Do not put it in a closed bookcase or a cabinet that may
keep air from flowing through its ventilation openings.
•Do not install near any heat sources, such as radiators,
heat registers, stoves or other appliances that produce
heat.
•Protect the power cord from being walked on or
pinched, particularly at plugs and the point where they
exit from the product.
•During Lightning storms, unplug the product from the
power source or if unused for long periods of time. This
will prevent lightning and power-line surge damage to
the product.
•Do not attempt to service this product yourself. Opening
or removing covers may expose you to dangerous
voltages or other hazards. Please contact the
manufacturer to be referred to an authorized service
center near you.
•Do not overload wall outlets, extension cords, or
integral power circuits as this can result in a risk of fire
or electric shock.
•Never push any object through the product openings,
as this can result in fire, electric shock or damage.
•Use proper power sources. Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.
If there is a Lightning flash with an arrow head
on the product, it’s intended to alert the User
of the presence of un-insulated “dangerous
voltage” within the product, that might be of
sufficient magnitude to constitute a risk of
electric shock to persons.
If there is an Exclamation point on the
product, it’s intended to alert the User that
there is important operating and maintenance
(servicing) information in the User manual.

www.argonaudio.com
Radio1, 2 and 3 Quick start
Quick start
Start up
1. Extend the Antenna
2. Plug the Power supply into an electric outlet and
into the back of the Radio.
3. The Radio will start searching for DAB stations
automatically. This may take a few minutes and
the progress will be shown in the display.
4. Once finished searching, the Radio will start
playing the first found station.
Basic Operating
1. Stations can be chosen by turning the
“Tuning/Select” knob.
2. Once the prefer station is found press the
“Tuning/Select” knob and the chosen station will
start playing.
3. To store a station on one of the 1-6 preset buttons,
press and hold the wished preset button for 3 sec.,
while playing the station that you want to store.
4. When stored, the display will show “Preset X
saved”
5. To change between the Modes DAB, FM, AUX
and Bluetooth (if your Radio has this function),
press the “Source” button repeatedly until you
reach the preferred Mode.
6. To tune stations in FM Mode press and hold the
“Autotune” button for 3 sec. and the Radio will
scan to the next available station. You can store
FM stations like mentioned in point 3.
7. Bluetooth (only If your product have Bluetooth
function). To pair and connect to a Bluetooth
player device (Tablet, Laptop, Mobile Phone etc),
press the Bluetooth symbol button on the Radio
and the Radio will go into Bluetooth mode. Activate
Bluetooth on your Player device and let it scan for
Bluetooth devices. When the Argon Audio Radio is
found, paired and connect via your Player, you can
start play back immediately.
For more Bluetooth operating instructions, look in
the full User manual at www.argonaudio.com
Other Operating functions
Inactive standby
The Radio is default set to turn off automatically
after 120 minutes To change this feature:
1. Press and hold the Display button for 3-5 seconds
until the Menu appears.
2. Then turn the Tuning/Select knob until it shows
"System" in the display and select this with a press
on the Tuning/Select knob.
3. Turn the Tuning/Select knob until "Inactive
Standby" appears in the display then select this
by pressing the Tuning/Select knob.
4. Then by turning the Tuning /Select knob - select "
Timeout: 2,4,5,6 hours or Off". Activate the
selected time by pressing the Tuning/Select knob.
5. Exit the setup menu by repeatedly pressing the
Display button.
You can find a full User Manual in PDF format
for this product at; www.argonaudio.com