Whirlpool LE5550XT User manual

Use&CareGuide
Cycle control knob
and temperature
Model and serial
LARGECAPACITY
AUTOMATICDRYERS
LE5550XT LG5551XT

Contents
Page
Important Safety lnstructlons
Additional safety instructions
and your responsibilities ............... .3
Operatlng lnstructlons
Starting your dryer.. ........................ .
The regular/permanent
press cyde.. ............................... .6
The knits, delicate cycle ................ .6
The fluff air cycle ........................... .7
Using TUMBLE PRESSa.. ............. 8
Using damp dry ............................. .8
Endofcycle signal ........................ .8
Carlng For Your Dryer
Cleaning the lint screen.. ............... .9
Lint screen maintenance ............... .9
Cleaning the dryer interior..
.......... 10
Lint removal
................................. 11
If You Need Servke Or
Assistance .................................... .l3
Whlrlpool Automatic Dryer
Warranty ....................................... .16
(al991 Whirlpool Corporation
lt your dryer has a Consumer Buy
Guide label, remove it. ft will be easier
to remove before the dryer is used. To
remove any remaining glue:
l Rub briskly with thumb to make a
ball, then remove.
or
. Soak area with liquid hand
dishwashing detergent before
removing glue as described above.
Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive
cleaners. These can damage the finish.
See ‘Important Safety Instructions” on
page 3.
NOTE: Do not remove any permanent
instruction labels inside the dryer.
You should wipe out the dryer drum
with a damp cloth before using to
remove dust from storing or shipping.
Thank you for buying a Whirlpool
appliance. Please complete and mail
the Owner Registration Card provided
with this product. Then complete the
form below. Have this information ready
if you need service or call with a
question.
l Copy model and serial numbers from
plate (on the frame behind the door)
and purchase date from sales slip.
l Keep this book, the Dryer Guide and
the sales slip together in a handy
place.
Model Number
serfal Number
Purchase Date
Servlce Company Phone Number
FOR YOUR SAFETY
If you smell gas:
1. Open windows.
2. Don’t touch electrlcal
switches.
3. ;zlnegulsh any open
.
4. Immediately call your gas
suppller.
FOR YOUR SAFETY
Do not store or use gasoline
or other flammable vapors
and llqulds In the vlclnlty of
thls or any other appliance.
The fumes can create a fire
hazard or exploslon.

ImportantSafetyInstructions
To reduce the rlsk of fire, electrlcal shock, or
Injury to persons when uslng your dryer, follow
bask precautions, lncludlng the followlng:
l Read all lnstructlons before uslng 9You are responsible for making
the dryer. sure that your dryer
is installed,
l NEVER dry items cleaned, washed, repaired and has parts replaced by a
soaked in or spotted with wax, paint, qualified person.
gasoline or flammable fluids in the
l Use only fabric softeners specifically
dryer. The fumes can create a FIRE
labeled as not being harmful to the
HAZARD or EXPLOSION. ALWAYS
dryer.
hand launder and air dry fabrics
l FIRE HAZARD and DAMAGE to
containing these materials. materials can result from:
bNEVER allow children to operate,
play with or crawl inside the dryer. -drying rubber, rubber-like and heat
sensitive materials with heat.
Close supervision of children is
necessary when the dryer is used -allowing lint build-up inside the
near children. dryer or exhaust system. Cleaning
l DO NOT reach into a dryer if the should be done periodically by a
drum is moving. qualified person.
l Clean lint screen before or after
. When discarding an old dryer, each bad.
ALWAYS remove the door to
prevent accidental entrapment.
l DO NOT let dust, lint, paper, rags,
n DO NOT install or store dryer where chemicals, etc. pile up around or
it will be exposed to the weather. under the dryer.
) DO NOT tamper with the controls.
l Dryer must be electrically grounded.
See the Installation Instructions.
- SAVE THESE INSTRUCTIONS -
Additionalsafetyinstructionsandyourresponsibilities
l NEVER operate the dryer if:
- II is not working right (i.e. noisy,
too hot).
-it is damaged.
-parts are missing (i.e. door latch).
-all panels are not in place.
-the lint screen is loose, damaged
or missing.
l ALWAYS shut off the gas valve
before leaving on vacation if you
have a gas dryer.
l ALWAYS unplug the power supply
cord or turn off electrical power
before attempting to service the
dryer. Shut off GAS VALVE if you
have a gas dryer.
l You are responslble for making
sure that your dryer:
-is properly maintained.
-is properly installed and leveled on a
floor that can support the weight in a
well ventilated room.*
-is located in an area where the
temperature is above 45°F (7°C).
- is connected to the proper outlet and
electrical supply.’
-is properly connected to fuel and
exhaust systems.’
-is not installed against drapes or
curtains.’
-is used only for jobs normally
expected of home clothes dryers.
-is not used by anyone unable to
operate it properly.
‘See the Installation Instructions for
complete information.

OperatingInstructions
Startingyourdryer
Be sure to refer to the chart below and the Dryer Guide for Proper sorting, loading
and control setting information before starting your dryer.
NOTE: Do not overdry. Overdrying can cause shrinkage, static ding, and damage
some fabrics.
SUGGESTED SUGGESTED
TYPE OF LOAD
CYCLE TIME
Cottons and Ilnsns
EXTRA HEAVY-Bedspreads, mattress
RegularIPermY 70-80 minutes
pads, quilts Press
HEAVYWEIGHT-Towels, jeans, axduroys.
RegularIPermY 50-80 minutes
wok dothes Press
MEDIUMWEIGHTSheets, pillowcases,
RegularIPermT 40-50 minutes
cdton underwear, diapers Press
LIGHTWEIGHT-Batistes. organdies,
RegulanPerm’t 30-40 minutes
lingerie Press
Permanent press, synthetics
and blends
HEAVYWEIGHT-Work dothes. jadtets, RegularIPermY 40-50 minutes
raincoats
Press
MEDIUMWEIGHTShirts. play dothes,
RegularIF’erm’t 30-40 minutes
sheets, slacks Press
LIGHTWEIGHT-Lingerie, blouses, dresses Knits, Delicate 20-30 minutes
Knits
HEAVYWEIGHT-Cottons, rayons, blends, ‘RegularIPerm’t 40-50 minutes
T-shirts, slacks. shirts Press
MEDlUMWElGHTSynthetic (polyester,
Knits, Delicate 3040 minutes
aaylic, etc.), dress sladts, skirts. sweaters
LIGHTWEIGHTSynthetic (polyester,
Knits, Delicate 20-30 minutes
aaylic, etc.) and blends, lingerie, blouses,
dresses
Dslkate fabrlca
Sheer curtains (2 or 3 panels)
gauze, lace, etc. Knits, Delicate 15-20 minutes
Rubber, plastic,
heat-aensltlve fabrlca
FOAM RUBBER-Pillows, bras, stuffed toys
PLASTIC-Shower curtains, tablecloths
RUBBER-BACKED RUGS
OLEFIN, POLYPROPYLENE,
SHEER NYLON
Fluff Air
Fluff Air
Fluff Air
Fluff Air
20-30 minutes
20-30 minutes
40-50 minutes
15-20 minutes
4

2. Push the Start Button to start
3. To atop and restart the dryer:
l wn the door or turn th& Cycle
Control Knob to OFF to stop the
dryer.
l Close the door, select a cycle (if
necessary) and push the Start
Button to restart the dryer.

Operating lnstructlons
Continued
TheREGULAR/PERMANENT
PRESScycle
The REGULAFVPERMANENT PRESS
Cycle helps provide the special care
that cottons, permanent press and
synthetic fabrics need. The cycle
consists of a timed period of heated
drying and a 10 minute cool down
period. During the cool down, the bad
tumbles without heat. This helps keep
wrinkles from setting and makes the
bad easier to handle.
NOTE: To help reduce wrinkling,
remove the bad from the dryer as
soon as tumbling stops. This is
important for permanent press, knits
and synthetic fabrics.
TheKNITS,DELICATEcycle
The KNITS, DELICATE Cycle helps
provide the special care that delicate
fabrics need. The cycle consists of a
timed period of reduced heat drying
and a 10 minute cool down period.
During the cool down, the bad tumbles
virihout heat. This helps keep wrinkles
from setting and makes the bad easier
to handle.
NOTE: To help reduce wrinkling,
remove the bad from the dryer as
soon as tumbling stops. This is
important for permanent press, knits
and synthetic fabrics.

TheFLUFFAIRcycle
I Flre Hazard
Do not dry plastic or rubber
items wlth heat. Use FLUFF AIR
cycle, or line dry. Failure to do so
could result In flre or damaged
i items.
The dryer does not heat when the
Cycle Control Knob is on FLUFF AIR.
This cycle can be used to fluff or air
dry bedding, plastic tablecloths, foam
rubber pillows, stuffed toys, sneakers,
etc.
1. Turn the Cycle Control Knob to the
desired number of minutes you
want in the FLUFF AIR Cycle.
2. Push the Start Button.

Operating lnstructlons
Continued
3
P
‘5
/ =-
\
\
UsingTUMBLEPRESS”
The TUMBLE PRESS setting removes
wrinkles from clothing that has been
packed in a suitcase or closet, and
from items not removed from the dryer
al the end of a cycle.
1. Set the Cycle Control Knob on
TUMBLE PRESS.
2. Push the Start Button.
The bad will tumble in heated air for
10 minutes. Then the dryer will tumble
the clothes for 10 more minutes
without heat.
For best results, put only a few
ifems at a time in this cycle. As soon
as the dryer stops, put the items on
hangers or fold them.
UsingDAMPDRY
Use this setting to dry damp items that
do not require an entire drying cycle,
or to dry items to damp level. (Two
examples are heavy cottons, such as
ieans, which you do not want to
become stiff, or cctton clothes which
are easier to press when damp.)
1. Set the Cycle Control Knob on
DAMP DRY.
2. Push the Start Button.
The dryer tumbles the load with heat
for 20 minutes, then without heat for
10 minutes.
End-of-cyclesignal
The dryer sounds a signal to let you
know when the cycle is finished. The
signal cannot be turned off and is not
adjustable.
The signal is helpful when you are
drying permanent press, synthetic and
other items that should be taken out as
soon as the dryer stops.

CaringForYourDryer
Do not run the dryer wlth the lint ecreen loose,
damaged, blocked or mleslng. Dolng so can
cause overheatlng and damage to both the
dryer and fabrics.
Cleaningthe lint screen
The lint screen is located under a lid
on top of the dryer. Clean It before
each load. A screen blocked by lint
can increase drying time.
1. Open the lid and pull the lint screen
straight out.
2. Roll lint off the screen with your
fingers. Do not rinse or wash the
screen to remove lint. Wet lint is
hard to remove.
3. Push the lint screen firmly back into
place and close the lid.
Lirit ScreenMaintenance
Laundry detergents and fabric
softeners can cause a residue build-up
on the lint screen. A clogged lint
screen can extend drying times. Clean
the lint screen every six months or
more frequently if it becomes clogged
due to a residue build-up. Use the
following method:
1. Wet both sides of lint screen with
hot water.
2. Wet a nylon brush with hot water
and liquid detergent.
3. Scrub lint screen with the brush
until all residue build-up is re-
moved.
4. Rinse with hot water.
5. Thoroughly dry lint screen with a
clean towel and replace in dryer.
9

Carlng For Your Dryer
Contlnued
cleaningtne aryer interior
Electrlcal Shock and
Personal Injury Hazard
l Turn off the electrlcal power
before cleaning the Interior.
l Make sure the dryer Is cool.
Failure to do so could result In
electrlcal shock or Injury.
Flre Hazard
l Use non-flammable cleaner.
Failure to do so could result In an
explosion.
Garments which contain unstable dyes,
such as denim blue jeans or brightly
colored cotton items, may discolor the
dryer interior. If the interior is discol-
ored, clean with one of the following
methods to avoid staining later load
items.
Powdered laundry detergent
Make a paste with detergent and very
warm water. Apply paste to a soft cloth
and scrub area until all excess dye is
removed. Wipe thoroughly with a damp
cloth. Tumble a bad of rags to dry.
-OR-
Llquld non-flammable household
cleaner
Apply to stained area. Rub with a cloth
until all excess dye is removed. Tumble
a load of rags to dry.
To clean dryer exterior, wipe with a
soft, damp cloth.
10