Whirlpool LE6090XS User manual

AUTOMATIC
DRYERS
Electric Model
LE6090XS
_and
Gas Model
Microwave Ovens, Trash Compactors. Room A=r Condptloners, Oehumldl/iers, Automahc Washers. Clothes Dryers, Freezers, Refrlgerator-F

Parts and features
CYCLE CONTROL KNOB
LAUNDRY INFORMATION CENTER
SELECTOR
START BUT[ON
LINT SCREEN
DRYER DRUM
MODEL
AND SERIAL
NUMBER PLATE
LOADING DOOR
Remove the Con-
sumer Buy Guide label
before using your
dryer. It will be easier
to remove.
Wipe out the dryer
drum with a damp
cloth to remove dust
from storing or ship-
ping.
Copy your Model and Serial Numbers here
When you need service or call with a
question, have this information ready:
t. Complete Model and Serial Numbers Model Number
(from the plate located as shown}.
2. Purchase date from sales slip. Serial Number
Copy this information in these spaces.
Keep this book in the Laundry Information Purchase Date
Center with your "Dryer Guidei' sales slip
and warranty. Service Company
Please complete and mail the Owner Telephone Number
Registration Card furnished with this product.
Contents
PARTS AND FEATURES. ........
IMPORTANT SAFETY
INSTRUCTIONS ................
OPERATING INSTRUCTIONS ....
Selecting a Cycle and
Starting Your Dryer ........
Automatic Cycles ...........
Timed Drying ...............
DRYING TIPS ..................
FLUFFAIR Setting ............
TUMBLEPRESS®Setting .......
Automatic DRY-MISER®
Control ...................
Gentle Heat .................
Page2Page
Mixed Loads ................ 8
Drying Times ................ 8
3 End-of-Cycle Signal ......... 8
4 Lint Signal .................. 8
LINT SCREEN .................. 9
4 LINT REMOVAL ................. 9
6 CARING FOR YOUR DRYER..... 10
6Cleaning Dryer Interior ...... 10
7 Vacation Care .............. 10
7 IF YOU NEED SERVICE OR
7ASSISTANCE .................. 11
WHIRLPOOL DRYER
WARRANTY ................... 12
7
7
©1987Whirlpool Corporation
2

Additional Safety Instructions and Your Responsibilities
ALWAYS shut off the gas valve before
leaving on vacation.
NEVER use or store flammable fluids
(dry-cleaning solvents, gasoline, ker-
osene) in or near your dryer. These sub-
stances give off vapors that can create
aFIRE HAZARD or EXPLOSION.
NEVER operate the dryer if.,,
•it is not working right (i.e. noisy, too hot).
• it is damaged.
• parts are missing (i.e. door latch).
• all panels are not in place.
• the lint screen is loose, damaged or
missing.
•FOR YOUR SAFETY •
IF YOU SMELL GAS:
1. OPEN WINDOWS.
2. DON'T TOUCH ELECTRICAL SWITCHES.
3. EXTINGUISH ANY OPEN FLAME.
4. IMMEDIATELY CALL YOUR GAS
SUPPLIER.
ALWAYS unplug the power supply cord
or turn off electrical power before at-
tempting to service the dryer. Shut oft
GAS VALVE if yours is a gas dryer.
You are personally responsible for
making sure that your dryer...
•is properly maintained.
•is properly installed and leveled in a
well ventilated room* on a floor that
can support the weight.
• _s located in an area where the tem-
)erature is above 45°F (7.2°C).
• _sconnected to the proper outlet and
electrical supply.*
• ts properly connected to fuel and ex-
haust systems.*
• is not installed against drapes or
curtains.*
• _s used only for jobs normally ex-
]ected of home clothes dryers.
• is not used by children or anyone un-
able to operate it properly.
*See "Installatlon Instructions" for
complete information.
3

Operating instructions
Selecting a Cycle
and Starting
Your Dryer
Beforestarting your dryer, be
sure laundry issorted and loaded
properly (see your "Dryer Guide").
Besure the door istlghfly closed.
SUGGESTED SUGGESTED
TYPEOFLOAD CYCLE TEMPERATURE
COTTONS- LINENS
EXTRAHEAVY- Bedspreads,
mattresspads, quilts ...................
HEAVYWEIGHTFABRICS- Towels.
jeans,corduroys,work clothes .........
MEDIUMWEIGHTCOTTONS-
Sheets,pillowcases, coffon
underwear, diapers ...................
LIGH1WEIGHTCOTTONS- Batistes,
organdies, lingerie ....................
PERMANENTPRESS,SYNTHETICS
AND BLENDS
HEAVYWEIGHTFABRICS- Workclothes,
jackets, raincoats .....................
MEDIUMWEIGHTFABRICS- Shirts,play
clothes,sheets,slacks..................
LIGHTWEIGHTFABRICS-Lingerie,
blouses,dresses .......................
HEAVY
HIGH
AUTOMATIC PERMg"PRESS
REGULAR MED
KNITS
HEAVYWEIGHT- Cottons,rayons,
blends,T-shirls,slacks,shirts............
LIGHTWEIGHT- Synthetics[polyester,
acrylic, etc.] and blends,lingerie,
blouses,dresses .......................
KNITS GENTLE
LOW
AUTOMATIC PERMg"PRESS
PERMANENT MED
PRESS
LIGHTWEIGHTAND DELICATEFABRICS AUTOMATIC
SheerCurtains (2 or 3 panels) ............ PERMANENT
Gauze. lace, etc......................... PRESS
MED LOW
FLUFF EXLOW
AIR
RUBBER,PLASTIC,HEAT-SENSITIVE
FABRICS
FOAMRUBBER-Pillows,bras,
stuffedtoys ............................
PLASTIC-Showercurtains,
tablecloths ............................
RUBBER-BACKEDRUGS....................
OLEFIN,POLYPROPYLENE,SHEERNYLON ...
MED LOW
AUTOMATIC
PERMANENT KNITSGENTLE
PRESS LOW
EXLOW

I. Select a CYCLE Set 2. TEMPERATURESELECTOR
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
3. Pushthe STARTButton
The Temperature Selector can be set
on any desired temperature or any-
where between 2 temperatures.
To stop and restart
the dryer
The dryer will start tumbling when you
push the STARTButton.
If the STARTButton is pushed when the
Cycle Control Knob is pointing to an
OFF area, the End-of-Cycle Signal will
sound. Dryer will not start.
To stop the dryer, Open the door (or
turn the Control Knob to OFF).
To restart the dryer, close the door,
select cycle, if necessary, and push
START.
The Cycle Control Knob should point to an OFF area when the dryer is not
in use. If the dryer is stopped before the cycle isfinished, turn the Cycle
Control Knob to an OFF area. 5

The automatic cycles
The automatic cycles allow you
to select the degree of dryness you
prefer for the clothes being dried.
The Cycle Control Knob will not
move until the clothes load isalmost
dry, or the COOL-DOWN portion
of the cycle has been reached. After
COOL-DOWN, the knob automati-
cally moves to an OFF area and
tumbling stops.
Forthefirstfew loads,settheControl
Knob topointtoan _ ineitherauto-
maticcycle.When thedryerstops,feel
thedrieditems.
Use
AUTOMATIC
REGULARto
dry heavy
and medium-
weight cotton items. The load tumbles
wlthout heat during the last 5 mln-
utes. This helps make the load easier
to handle.
•If items are drier than you like, use
a setting to the right of the :_ the next
time you dry a similar load.
Use
AUTOMATIC
PERMANENT
PRESSto dry
permanent
press, knits and other synthetic
fabrics. The load tumbles without
heat during the last t0 minutes. This
helps keep wrinkles from setting in
and makes the load easier to
handle.
•If items are not as dry as you like, use
a setting to the left of the :_ the next
time you dry a similar load.
Tuned drying
Use the TIMED DRYING Cycle for
any load you want to dry by time.
• Turn the Control Knob to the number
of minutes you want-from t0 to 70.
• The last 10 minutes of this cycle are
without heat- a cool-down time.
This helps make the load easier to
handle.
6

Drying tips TUMnLE PRESS ®Setting
FLUFF
The dryerdoes not heat when the
ControlKnob isseton FLUFFAIR.This
settingcon be used tofluffbedding,
plastictablecloths,foam rubber
pillows,stuffedtoys,sneakers,etc.
The TUMBLEPRESSsetting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
t. Turn the Control Knob to the number
of minutes you want in FLUFFAIR.
2. Push the STARTButton.
Automatic DRY-MISER ®
Control
The thermostat senses the air
temperature. The dryer automatically
shuts off when the selected dryness
is reached.
1. Set Control Knob to TUMBLEPRESS.
2. Set Temperature Selector to PERM'T
PRESS/MED.
3. Push STARTButton.
The load will tumble in heated air
for 15 minutes. The heat shuts off and the
dryer continues to tumble the load
for 5 more minutes.
For best results, TUMBLE PRESSonly a
few items at a time. Put them on hang-
ers or fold them as soon as the dryer
stops.
Gentle Heat
The dryer automatically reduces
the heat settings in HEAVY HIGH and
PERM'TPRESSMED cycles. During
the last few minutes of each of
these cycles the dryer temperature
gradually reduces to a lower heat
setting. This helps prevent
overdrying.

Mixed loads Drying times
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest fab-
rics. When the dryer stops, remove dry
items and reset the control.
Toreduce wrinkling, take the load
from dryer as soon as tumbling stops.
This is important for permanent press,
knits and synthetic fabrics.
Drying times will vary depending on:
•amount of moisture in the clothes.
• type and weight of the fabric.
•size of load,
• room temperature around the dryer.
• temperature of the wash rinse water.
• amount of lint in the lint screen,
• dryer temperature selection.
See your "Dryer Guide" for more
information.
End-of-cycle signal The dryer sounds o signal to let you know when
the cycle is finished. The signal cannot be turned
off and is not adjustable.
The signal ishelpful when you are drying per-
manent press, synthetics and other items that
should be taken out as soon as the dryer stops.
Lint signal
Clean lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone) signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn offthe dryer and clean the lint screen as
shown on page 9.

Lint screen
Clean the lint screen before each load. Ascreen blocked by lint can
increase drying time and may be a FIREHAZARD.
Open the lid and pull the lint screen
straight out, ROLL the lint off the screen with
your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into place.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint
should be removed at least every 2 to 3 years, or more often, depending
on dryer usage.
Thermostats
Hea_erBox
Heat Element
Terminals
Funnel
Igniter
Lower
Access
Panel
ELECTRIC DRYERS GAS DRYERS
Cleaning should be done only by a qualified person.
WARNING:
• Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrlcal power.
•Avold Injury or damage - do not
put hands Inslde cabinet.
• Make sure dryer is cool.
1. Remove back panel (electric)
or lower access panel (gas).
2. Avoid damaging wires,
thermostats, funnel or igniter.
3. Remove lint from shaded area -
see art- with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer. 9

Caring for your dryer
Remove loose and sharp objects
from pockets and cuffs before drying -
pins, buckles, etc. Close metal
zippers.
Some pretreatment products can
damage dials, consoles and finish.
Do not use these products on or near
your dryer.
tO
Wipe off all spills with a damp, soft
cloth. Spills allowed to remain may
dull or damage the finish.
Never leave wet or damp laundry
inyour dryer.
Sharp or heavy objects should
never be put on or in the dryer.
Check pockets for bolts, nuts etc.
Cleaning dryer interior
WARNING: Before
cleaning interior, unplug
power supply cord or,
turn off electrical power to
avoid electrical shock hazard.
Garments which contain unstable
dyes, such as denim blue jeans or
brightly colored cotton items, may
discolor the dryer interior. Ifthe
interior is discolored, clean with
one of the following methods to
avoid staining later load items.
Powdered laundry detergent and
very warm water
Make a paste with detergent and
very warm water. Apply paste to
a softcloth and scrub area until
all excess dye is removed. Wipe
thoroughly with a damp cloth.
Tumble a load of rags. -OR-
Liquid spray household cleaner
Spray on stained area. Rub with
a cloth until all excess dye is
removed. Tumble a load of rags.
Vacation care
•Unplug power cord or turn off
electrical power.
• For gas dryers, close gas valve.
• Clean lint screen.