Whirlpool LEW0050PQ - Electric Dryer User manual

CONSUMER SERVICES TECHNICAL
EDUCATION GROUP PRESENTS
L-76
JOB AID
Part No. 8178475
24″ ELECTRIC
DRYER
Model LEW0050PQ

- ii -
WHIRLPOOL CORPORATION assumes no responsibility for any repairs made
on our products by anyone other than Authorized ervice Technicians.
FORWARD
This Whirlpool Job Aid “24″ Electric Dryer” (Part No. 8178475), provides the technician with
information on the installation, operation, and service of the 24″ Electric Dryer. It is to be used as
a training Job Aid and ervice Manual. For specific information on the model being serviced, refer
to the “Use and Care Guide,” or “Tech heet” provided with the dryer.
The Wiring Diagram used in this Job Aid is typical and should be used for training purposes only.
Always use the Wiring Diagram supplied with the product when servicing the unit.
GOALS AND OBJECTI ES
The goal of this Job Aid is to provide detailed information that will enable the service technician to
properly diagnose malfunctions and repair the 24″ Electric Dryer.
The objectives of this Job Aid are to:
• Understand and follow proper safety precautions.
• uccessfully troubleshoot and diagnose malfunctions.
• uccessfully perform necessary repairs.
• uccessfully return the dryer to its proper operational status.
Copyright © 2004, Whirlpool Corporation, Benton Harbor, MI 49022

- iii -
TABLE OF CONTENTS
Page
GENERAL............................................................................................................................... 1-1
afety First......................................................................................................................... 1-1
Model & erial Number Label Location ............................................................................. 1-2
Whirlpool Dryer Warranty .................................................................................................. 1-3
INSTALLATION INFORMATION ........................................................................................... 2-1
Installation Instructions ...................................................................................................... 2-1
PRODUCT OPERATION ........................................................................................................ 3-1
Theory Of Operation .......................................................................................................... 3-1
Dryer Use........................................................................................................................... 3-3
COMPONENT ACCESS ......................................................................................................... 4-1
Component Locations ........................................................................................................ 4-1
Removing The Control witches & Indicator Light ............................................................ 4-2
Removing The Door witch ............................................................................................... 4-4
Removing The afety Thermostats & The Dual Heating Elements ................................... 4-5
Removing The Belt And The Drum .................................................................................... 4-6
Removing The Operating & afety Thermostats ............................................................... 4-8
Removing The Front lide Blocks & Rear eal ................................................................. 4-9
Removing The Main And Fan Motors & Capacitors ........................................................ 4-10
COMPONENT TESTING ........................................................................................................ 5-1
Pushbutton witches ......................................................................................................... 5-1
Door witch ....................................................................................................................... 5-2
Dual Heating Elements ...................................................................................................... 5-2
Thermostats ....................................................................................................................... 5-3
Main & Fan Motor Capacitors ............................................................................................ 5-3
Main Motor ......................................................................................................................... 5-4
Fan Motor .......................................................................................................................... 5-4
WIRING DIAGRAM................................................................................................................. 6-1

- iv -
— NOTES —

1-1
GENERAL
SAFETY FIRST
Your safety and the safety of others is very important.
We have provided many important safety messages in this Job Aid and on the appliance. Always
read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word
“DA GER” or “WAR I G.” These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance
of injury, and tell you what can happen if the instructions are not followed.
You an be killed or seriously injured if you don’t
immediately follow instru tions.
You an be killed or seriously injured if you don’t
follow instru tions.

1-2
MODEL & SERIAL NUMBER LABEL LOCATION
The Model/Serial umber label location is shown below.
Model & Serial Number
Label Lo ation

1-3
WHIRLPOOL DRYER WARRANTY
ONE-YEAR FULL WARRANTY
For one year from the date of purchase, when this dryer is operated and maintained according to instructions
attached to or furnished with the product, Whirlpool Corporation will pay for FSP replacement parts and repair
labor costs to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated
service company.
Whirlpool Corporation will not pay for:
1. Service calls to correct the installation of your dryer, including venting. Heavy 4″ (10.2 cm) metal exhaust
vent must be used. Refer to the venting section of this manual and your Installation Instructions.
2. Service calls to instruct you how to use your dryer, to replace house fuses or correct house wiring or reset
circuit breakers, or to replace owner accessible light bulbs.
3. Repairs when your dryer is used in other than normal, single-family household use.
4. Damage resulting from accident, alteration, misuse, abuse, fire, floods, acts of God, improper installation
(including, but not limited to, venting with plastic or flexible foil), installation not in accordance with local elec-
trical and plumbing codes, or use of products not approved by Whirlpool Corporation.
5. Replacement parts or repair labor costs for units operated outside the United States.
6. Pickup and delivery. This product is designed to be repaired in the home.
7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or
limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
Outside the 50 United States, this warranty does not apply. Conta t your authorized Whirlpool dealer to
determine if another warranty applies.
If you need service, first see “Troubleshooting” in the “Use and Care Guide.” Additional help can be found by
checking “Assistance or Service,” or by calling our Customer Interaction Center at 1-800-253-1301, from any-
where in the U.S.A., or write: Whirlpool Corporation, Customer Interaction Center, 553 Benson Road, Benton
Harbor, Ml 49022-2692.

1-4
— NOTES —

2-1
INSTALLATION INFORMATION
INSTALLATION INSTRUCTIONS
TOOLS AND PARTS
Tools Needed
Gather the required tools and parts before
starting installation. Read and follow the safety
instructions provided with any tools listed here.
Flat-blade screwdriver
Level
Adjustable wrench
T 0 Torx Screwdriver
Wire stripper (direct wire
installations)
Wood block
Caulking gun and
compound (for installing
new exhaust vent)
Tin snips (new vent
installations)
Vent clamps
Parts Supplied
Remove parts package from the dryer drum.
Check that all parts listed are included.
Explosion Hazard
eep flammable materials and vapors,
such as gasoline, away from dryer.
Place dryer at least 18 inches (46 cm)
above the floor for a garage installation.
Failure to do so can result in death, ex-
plosion, or fire.
WARNING
Parts Needed
Check local codes, existing electrical supply
and venting, and see “Venting Requirements”
and “Electrical Requirements” before purchas-
ing parts.
LOCATION REQUIREMENTS
Coupling
You Will Need
• A location that allows for proper exhaust
installation (see “Venting Requirements”).
• A separate 30 amp circuit.
• A grounded electrical outlet located within
ft (61 cm) of either side of the dryer (see
“Electrical Requirements”).
• A sturdy floor to support the dryer weight
(dryer and load) of 115 lbs (5 kg). The
combined weight of a companion appliance
should also be considered.
• A level floor with a maximum slope of 1″
( .5 cm) under entire dryer.
Do not operate your dryer at temperatures
below 45°F (7°C). At lower temperatures, the
dryer might not shut off at the end of an auto-
matic cycle. Drying times can be extended.
The dryer must not be installed or stored in an
area where it will be exposed to water and/or
weather.
Check code requirements. Some codes limit,
or do not permit, installation of the dryer in
garages, closets, mobile homes, or sleeping
quarters. Contact your local building inspector.

2-2
Installation Clearances
The location must be large enough to allow the
dryer door to open fully.
Dryer Dimensions
Most installations require a minimum 5-1/ ″
(14.0 cm) clearance behind the dryer for the
exhaust vent with elbows (see “Venting Re-
quirements”).
(84.45 cm)
23-3/8"
(59.37cm)
39"
(99.1cm)
(60.3cm)
23-1/4"
33-1/4"
Recessed Or Closet Installation—Dryer Only
A. Side view - closet or confined area
B. Recessed area
AB
3"
(7.6cm)
14"
(35.6cm)
18"(45.7 cm)
0"
(0cm)
0"
(0cm)
Recessed Or Closet Installation—Stacked
A. Recessed area
B. Side view - closet or confined area
C. Closet door with vents
DRYER
WASHER
(30.5 cm)
12"
0" (0 cm) 0" (0 cm)
ABC
1" (2.5 cm)
48 in.
2
(310 cm
2
)
24 in.
2
(155 cm
2
)
3"
(7.6 cm
)
3"
(7.6 cm
)
3" (7.6 cm)
Mobile Home—Additional Location
Requirements
This dryer is suitable for mobile home installa-
tions. The installation must conform to the
Manufactured Home Construction and Safety
Standard, Title 4 CFR, Part 3 80 (formerly
the Federal Standard for Mobile Home Con-
struction and Safety, Title 45, HUD Part 80).
Mobile Home Installations Require
• Metal exhaust system hardware which is
available for purchase from your dealer.
• Special provisions must be made in mobile
homes to introduce outside air into the dryer.
The opening (such as a nearby window)
should be at least twice as large as the dryer
exhaust opening.
Minimum Installation Spacing For
Recessed Area And Closet Installation
The following dimensions shown are for the
minimum spacing allowed when the unit is to
be operated with, or without, the Stack Stand
Kit. To purchase a Stack Stand Kit, see “Assis-
tance or Service” in the “Use And Care Guide.”
• Additional spacing should be considered for
ease of installation and servicing.
• Additional clearances might be required for
wall, door, and floor moldings.
• Additional spacing of 1″ ( .5 cm) on all sides
of the dryer is recommended to reduce noise
transfer.
• For closet installation with a door, minimum
ventilation openings in the top and bottom of
the door are required. Louvered doors with
equivalent ventilation openings are accept-
able.
• Companion appliance spacing should also
be considered.