Whirlpool LG5761XS User manual

m I11
AUTOMATIC
DRYERS
Electric Model
LE5760XS
and
Gas Model
LG5761XS

Parts and features
CYCLE CONTROL KNOB
‘,
1, DRYER DRUM
LOADING DOOR
-M LAUNDRY INFORMATION CENTER
Remove the Con-
sumer Buy Guide label
before using your
dryer. It will be easier
to remove.
Wipe out the dryer
drum with a damp
cloth to remove dust
from storing or ship-
ping.
Copy your Model and Serial Numbers here
When you need service or call with a
question, have this information ready.
1. Complete Model and Serial Numbers
(from the plate located as shown]
2. Purchase date from sales slip.
Copy this information in these spaces
Keen this book in the Laundrv Information
Center with your “Dryer Guide:’ sales slip
and warranty.
Model Number
Serial Number
Purchase Date
Please complete and mail the Owner
Registration Card furnished with this
product.
Service Company
Telephone Number
Contents
PARTS AND FEATURES
IMPORTANT SAFETY
INSTRUCTIONS
OPERATING INSTRUCTIONS.
Selecting a Cycle and
Starting Your Dryer
Automatic Cycles
Timed Drying
DRYING TIPS
FLUFF AIR Setting
Automatic DRY-MISER”
Control
Page
2
3
4
4
6
6
7
7
7
Drying Times
Mixed Loads..
LINT SCREEN
LINT REMOVAL.
CARING FOR YOUR DRYER..
Cleaning Dryer Interior,
Vacation Care
IF YOU NEED SERVICE OR
ASSISTANCE
WHIRLPOOL DRYER
WARRANTY
Page
7
7
a
a
9
9
9
10
12
2 c1987 Whirlpool Corporation

Additional Safety Instructions
NEVER operate the dryer if...
l it is not working right (i.e. noisy, too hot).
l it is damaged.
l parts are missing (i.e. door latch).
l all panels are not in place
l the lint screen is loose, damaged or
missing.
FOR YOUR SAFETY
If you smell gas:
1. Open windows.
2. Don’t touch electrical
switches.
3. ;;tteguish any open
.
4. Immediately call your
gas supplier.
FOR YOUR SAFETY
Do not store or use gas-
oline or other flammable
vapors and liquids in the
vicinity of this or any other
appliance.
and Your Responsibilities
ALWAYS shut off the gas valve before leav-
ing on vacation.
ALWAYS unplug the power supply cord or
turn off electrical power before attempting
to service the dryer Shut off GAS VALVE if
yours is a gas dryer.
You are personally responsible for making
sure that Your.dryer...
l is properly maintained.
l is properly installed and leveled in a well
ventilated room’ on a floor that can sup-
port the weight.
l is located in an area where the tempera-
ture is above 45’ F (7.2 C).
l is connected to the proper outlet and
electrical supply.’
l is properly connected to fuel and ex-
haust systems.’
l is not installed against drapes or
curtains.’
l is used only for jobs normally expected
of home clothes dryers.
l is not used by children or anyone unable
to operate it properly.
*See “Installation Instructions” for com-
plete information.

TYPE OF LOAD
COllONS - LINENS
SUGGESTED SUGGESTED
CYCLE TEMPERATURE
EXTRA HEAVY - Bedspreads,
mattress pads, quilts
HEAVYWEIGHT FABRICS-Towels,
jeans, corduroys, work clothes AUTOMATIC PERMIT
MEDIUMWEIGHT COTTONS - REGULAR PRESS
Sheets, pillowcases, cotton HEAVY
underwear, diapers HIGH
LIGHTWEIGHT COTTONS - Batistes,
organdies, lingerie
PERMANENT PRESS, SYNTHETICS
AND BLENDS
HEAVYWEIGHT FABRICS - Work clothes,
jackets, raincoats AUTOMATIC
PERM’T PRESS PERMIT
MEDIUMWEIGHT FABRICS-Shirts, play PRESS
clothes, sheets, slacks.. HEAVY
LIGHTWEIGHT FABRICS - Lingerie, HIGH
blouses, dresses
KNITS
HEAVYWEIGHT - Cottons, rayons, BCOLI’T Dmcre
blends, T-shirts, slacks, shirts
LIGHTWEIGHT - Synthetics (polyester, &ErMpART:FS HEAVY HIGH
acrylic, etc.) and blends, lingerie, KNITS GENTLE
blouses, dresses LOW
LIGHTWEIGHT AND DELICATE FABRICS
Sheer Curtains (2 or 3 panels] AUTOMATIC KNITS GENTLE
Gauze, lace, etc. PERMIT PRESS LOW
RUBBER, PLASTIC, HEAT-SENSITIVE
FABRICS TIMED DRYING
FOAM RUBBER- Pillows, bras,
stuffedtoys............................
PLASTIC - Shower curtains,
tablecloths.
RUBBER-BACKED RUGS
OLEFIN. POLYPROPYLENE. SHEERNYLON
20-30 MINS. FLUFF
20-30 MINS. AIR
40-50 MINS.
15-20 MINS.

1 . Select a CYCLE
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
3. Push the START Button
The dryer will start tumbling when you
push the STARTButton.
2
Set
. TEMPERATURE SELECTOR
Turn the Temperature Selector to the
needed drying temperature.
To stop and restart
the dryer
To stop the dryer, open the door (or
turn the Control Knob to OFF).
To restart the dryer, close the door,
select cycle, if necessary, and push
START.
The Cycle Control Knob should point to OFF when the dryer is not in use.
If the dryer is stopped before the cycle is finished, turn the Cycle Control
Knob to OFF.
5

The automatic cycles
The automatic cycles allow you to se-
lect the degree of dryness you prefer
for the clothes being dried.
The Control Knob will not move until
the clothes load is almost dry, or the
COOL-DOWN portion of the cycle has
been reached. After COOL-DOWN, the
knob automatically moves to an OFF
area and tumbling stops.
weight cotton items. The load tumbles
without heat during the last 5 min-
utes. This helps make the load easier
to handle.
press, knits and other synthetic fab-
rics. The load tumbles without heat
during the last 10 minutes. This helps
keep wrinkles from setting in, and
makes the load easier to handle.
For the first few loads, set the Control
Knob to point to an * in either auto-
matic cycle. When the dryer stops, feel
the dried items.
l If items are drier than you like, use
a setting to the right of the * the next
time you dry a similar load.
l If items are not as dry as you like, use
a setting to the left of the * the next
time you dry a similar load.
Timed drying
Use the TIMED DRYING Cycle for
any load you want to dry by time. For
example: small loads, large bulky
items, items to be fluffed or dusted
with the FLUFFAIR heat setting.
l Turn the Control Knob to the number
of minutes you want - from 10 to 60.
l The last 5 minutes of this cycle are
without heat-a cool-down time.
This helps make the load easierto
handle.
l For Damp Dry turn the Control Knob
to the 30 minute setting or less in
this cycle.
6

Drying tips
Drying times
The dryer does not heat when the
Temperature Selector is set on FLUFF Drying times will vary depending on:
AIR. This setting can be used to fluff
l amount of moisture in the clothes.
bedding, plastic tablecloths, foam
l type and weight of the fabric.
rubber pillows, stuffed toys, sneakers,
l size of load.
1. Turn the Temperature Selector to
FLUFFAIR.
2. Turn the Control Knob to the number
of minutes you want in the TIMED
DRYING Cycle.
3. Push the STARTButton.
Automatic DRY-MISER”
Control
The thermostat senses the air
temperature. The dryer automatically
shuts off when the selected dryness
is reached.
l room temperature around the dryer.
l temperature of the wash rinse water.
l amount of lint in the lint screen.
l dryer temperature selection.
See your “Dryer Guide” for more
information.
Mixed loads
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest fab-
rics. When the dryer stops, remove dry
items and reset the control.
To reduce wrinkling, take the load
from dryer as soon as tumbling stops.
This is important for permanent press,
knits and synthetic fabrics.

Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIREHAZARD.
Open the lid and pull the lint screen
straight out. ROLL the lint off the screen with
your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into place.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint
should be removed at least every 2 to 3 years, or more otten, depending
on dryer usage.
ELECTRIC DRYERS
Cleaning should be done only by a qualified person.

Remove loose and sharp objects
from pockets and cuffs before drying -
pins, buckles, etc. Close metal
zippers.
Wipe off all spills with a damp, soft
cloth. Spills allowed to remain may
dull or damage the finish.
Never leave wet or damp laundry
in your dryer.
Sharp or heavy objects should
never be put on or in the dryer.
Check pockets for bolts, nuts etc.
Some pretreatment products can
damage dials, consoles and finish.
Do not use these products on or near
your dryer.
Cleaning dryer interior
Garments which contain unstable
dyes, such as denim blue jeans or
brightly colored cotton items, may
discolor the dryer interior, Ifthe
interior is discolored, clean with
one of the following methods to
avoid staining later load items.
Powdered laundry detergent and
very warm water
Make a paste with detergent and
very warm water. Apply paste to
a soft cloth and scrub area until
all excess dye is removed. Wipe
thoroughly with a damp cloth.
Tumble a load of rags. -OR-
liquid spray household cleaner
Spray on stained area. Rub with
a cloth until all excess dye is
removed. Tumble a load of rags.
Vacation care
l Unplug power cord or turn off
electrical power.
l For gas dryers, close gas valve
0 Clean lint screen. 9

If you need service or assistance,
we suggest you follow these five steps:
1. Before calling for
assistance...
Performance problems often result
from little things you can find and fix
yourself without tools of any kind.
IF YOUR DRYER DOES NOT RUN:
l Is the power supply cord plugged
into a live circuit with the proper
voltage?
l Is the door closed tightly?
l Did you push the STARTButton?
l Have you checked your home’s
main fuses or circuit breaker box?
IF YOUR DRYER DOES NOT HEAE
l The AIR setting is without heat.
l The last minutes of heat settings are
without heat.
l Is the gas turned on? If not, turn the
Control Knob to OFF.Turn on gas. Wait
5 minutes. Reset control and start.
l An electric dryer uses a circuit
breaker or 2 fuses. If one fuse is
blown, the dryer may run, but not
heat.
IF DRYING TIME SEEMS TOO LONG:
l Is the lint screen clean? See page 8
of this book for cleaning instructions.
l See page 7 of this book and your
“Dryer Guide:’
2. If you need
assistance?..
Call Whirlpool COOL-LINE” serv-
Ice assistance telephone number.
Dial free from anywhere in the U.S.:
l-800-253-1301
and talk with one of our trained Con-
sultants. The Consultant can instruct
you in how to obtain satisfactory
operation from your appliance or, if
service is necessary, recommend a
qualified service company in your
area.
10