Whirlpool ACM 213/BA User manual

2-head induction hob instruction manual
SENSING THE DIFFERENCE
雙頭電磁爐使用手冊
ACM 213/BA

RECOMMENDED DIAMETERS OF POT BOTTOMS
1. IMPORTANT SAFETY INFORMATION
This manual contains important informaon regarding safety, the use and maintenance of your new hob. Read
the manual and keep it in an easily accessible place for future consultaon.
This cooktop complies with all applicable safety and electromagnec compability legislaon. However,
individuals fied with a heart pacemaker should maintain a safe distance from the appliance. This is because
it is not possible to guarantee that all pacemakers on the market comply with the standards in compliance with
which this appliance was tested so it is not possible to provide an absolute guarantee of the absence of
potenally harmful interference.
Disposal of packaging materials: dispose of the various packing materials responsibly, in full compliance with
local authority regulaons governing waste disposal.
This inducon hob is designed solely for use as a domesc appliance. No other type of use is permied. The
manufacturer declines all responsibility for inappropriate use.
The appliance is not intended for use by people (children included) with physical, sensory or mental
impairment or without experience and knowledge of the appliance, unless supervised or previously instructed
in its use by those responsible for their safety.
The cooking zones become extremely hot during use: keep children away from the appliance to avoid the risk
of scalding or burns.
The 4th lamp from the le (on both sides) will light on the control display to indicate “residual heat” in the
corresponding cooking zone: the temperature of the cooking zone is above 65 °C: do not touch the cooking
zone or place any object on it while the lamp remains lit.
If the surface of the hob should become damaged (cracked or broken glass), do not use the appliance and call
the Aer-sales Service immediately.
Any repairs or work on the appliance must be carried out by a qualified technician.
This hob is equipped with a thermoprotector to prevent the risk of its internal circuits being damaged by high
temperatures from external heat sources (e.g. an undercounter oven). If the temperature of the electronic
circuits exceeds the safety threshold, the thermoprotector acvates, automacally switching off the hob. The
display shows an error message (see. secon “Troubleshoong Guide”). When the temperature returns to within
normal levels the hob is able to be switched on again.
Make sure the cooking zones and the booms of pots are dry before use.
Do not place metal objects such as kitchen utensils (knives, forks, spoons, …), lids or other similar items on the
cooking zones as they can become very hot.
Be extremely vigilant when cooking food with boiling oil or fat since these can catch fire. In the event of oil
catching fire, never aempt to put it out with water: switch the hob off and cover the pot immediately with a
lid; leave the pot on the cooking zone to cool down. Dispose of the oil in compliance with current regulaons.
When you finish cooking, press buon
PRECAUTIONS AND ADVICE
BEFORE USE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Important:The inducon cooking zones will not switch on if pots and pans are not of the correct
dimensions.Only use pots bearing the symbol “INDUCTION SYSTEM” (See figure opposite).
Before switching the hob on, posion the pot on the desired cooking zone.
EXISTING POTS AND PANS
Use a magnet to check whether pots or pans are
suitable for use on the inducon hob:pots are
unsuitable if they cannot be magnecally detected.
Ensure pots have a smooth boom, otherwise they may scratch the hob's glass ceramic surface.Check dishes.
Do not use empty pots on the hob, especially enamelled or aluminium ones.This could result in damage to
both the glass ceramic surface and the boom of the pots.
Never place hot pots or pans on the hob's control panel.This could result in damage.
1.
2.
3.
1
Ø
22 cm
OK NO
LØ
11 cm 22 cm
Ø
18 cm
SØ
9 cm 18 cm

2. OPERATING INSTRUCTIONS
PRECAUTIONS AND ADVICE
SWITCHING ON AND ADJUSTING COOKING ZONES
CONTROL PANEL
Control panel graphics shown in these instrucons might not match exactly the graphics of your hob.
Buon’s funcons are the same for all hob models.
To switch the hob on, press the buon for approx. 2 seconds unl the cooking zone (13-18) or (25-30) are
lightens, from le to right. To switch off, press the same buon unl the displays switch off. All the cooking zones
are switched off.
If the hob has been in use, the residual heat indicator “4th lamp from le” remains lit unl the cooking zones have
cooled down.
The hob automacally switches off if no funcon is selected within 10 seconds of switching on.
Aer switching on the hob and posioning the pot on the chosen cooking zone, adjust the heat seng using the
buon or . Each cooking zone has different heat sengs that can be adjusted using the buons / ,
which go from “1”: min. heat seng to “6”: max. heat seng, or cooking max level ( ).
The cooking zone can also be set to level 1 by pressing keys “ ” and “ ” at the same me. If the le zone is set to
max, right zone max level will be 4.
Switching off cooking zones
A cooking zone can be switched off by touching the ON/ OFF key .
Press the key “ ” to set the level to “0”.
Enclosure Mark
2
Sensor controls for
1. ON/OFF key of le cookng zone
2. Cooking level Minus (-) le
3. Cooking level Plus (+) le
4. Maximum level le
5. Timer
6. Timer Minus (-)
7. Timer Plus(-)
8. Key Lock key
9. ON/OFF key of right cooking zone
10. Cooking level Minus (-) right
11. Cooking level Plus (+) right
12. Maximum level right
If the le cooking zone is set to max, the right cooking zone power level will be 600W.
Cooking zones Rang in kWDiameter in mm
Le Normal: 2.2110-220
Right Normal: 1.3490-180

The hob is fied with a residual heat indicator for each cooking zone. These indicators alert the user when cooking
zones are sll hot.
If the 4th lamp from the le is on, the cooking zone is sll hot. If the residual heat indicator of a given cooking zone
is lit, that zone can be used, for example, to keep a dish warm or to melt buer.
When the cooking zone cools down, the display switches off
The mer can be used to set a max. cooking me of 9 hours 59 minutes for one cooking zone only. Select the
cooking zone to be used with the mer then press to acvate the mer and set the desired cooking me using
the buons “ ” and “ ” of the mer funcon. A few seconds aer the buon is pressed, the mer begins
the countdown. Once the set me has elapsed, an acousc signal sounds and the cooking zone switches off
automacally.
To deacvate the mer, press the buon “ ” unl the display shows “0:0”.
CHILD LOCK
TIMER
This funcon locks the hob controls to prevent accidental switching on by children. To acvate the child lock
funcon, switch on the hob then press the buon “ ”. The indicator (Indicator 35) above the safety lock key will
shine stacally.
The control panel is locked with the excepon of the ON/OFF funcon. To unlock the controls, repeat the child lock
acvaon procedure. The illuminated dot switches off and the hob is acve again.
The presence of cleaning water, liquid spilled from pots or any objects resng on the buon below the symbol can
accidentally acvate or deacvate the child lock funcon.
Important!
The mer funcon can only be used with one cooking zone at a me.
RESIDUAL HEAT INDICATOR
The hob features an automac pot detecon system for all cooking zones. If no pot is detected, Erroe code “E3”
will be shown. Make sure the pot is correctly posioned and that it has the characteriscs given in the secon
“Before use”.
A certain maximum operang me had been fixed on every acvated cooking zone. The maximum operang me
depends on the selected power level. Aer expiry of the maximum operang me, the appliance will be shut off
automacally providing that no alteraon of the seng for that cooking zone had been made for safety purpose.
Please use the mer seng if the cooking me excess the corresponding limitaon.
INCORRECT OR MISSING POT INDICATOR
AUTO-POWER OFF
3
CONTROL PANEL INDICATORS
Right cooking zone
420
300
240
180
120
90
Le cooking zone
Operaon me limitaon (minute)
420
300
240
180
120
90
Power Level
1
2
3
4
5
6

3. MAINTENANCE
TROUBLESHOOTING GUIDE
Clean the hob aer each use in order to avoid damaging the surface and to prevent the formaon of baked-on
deposits which are difficult to remove. Before cleaning, make sure the cooking zones are switched off and that the
residual heat indicator is not displayed.
• Never clean the hob with a steam cleaner!
• Periodically check for dust under the appliance, near the cooling air inlet or the outlet openings.
This could hinder the venlaon and cooling of the electronic module and decrease the effecve
ness of the hob.
To clean the hob, proceed as follows:
1. Use a so clean cloth, absorbent kitchen wipes or a proprietary cleaner for glass ceramic hobs. Do not use
abrasive sponges and/or metal scouring pads.
2. Food spills should be cleaned off before they bake onto the glass ceramic surface. Sugar and foods with a high
sugar content damage the glass ceramic surface and must be immediately removed using a scraper for glass.
Glass scrapers must be handled with care.
3. Remove any stubborn food residues with a scraper or proprietary detergents.
4. Salt, sugar and sand can scratch the glass ceramic hob: clean up any such spills on the hob immediately.
Before contacng Aer-sales Service:
• Read and follow the instrucons given in the secon “Operang instrucons”.
• Connect the hob to the electricity supply and check that the supply has not been shut off.
• Clean the hob and dry it thoroughly.
• If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table for instrucons.
4. BASIC INSTALLATION
The voltage, rated load and fusing are listed on the data plate. Please make sure that these match your household
supply mains.
a. Dimensions of space to be provided for the appliance b. Dimensions and posions of the means for
supporng and fixing the appliance within this
space
Warning! If you are unable to turn the glass-ceramic hob off aer using it, disconnect it immediately
from the power supply.
4
E2
Cooking is being interrupted • Cook again aer cooling
down
• Clear the air vent
E3
Control panel switches off
beacuse heang is
interrupted
• Water or utensils on control panel
• Incorrect cook pot is used
• Pot is moved during cooking
• Pot is removed during cooking
• Use a correct cook pot
• Place cook pot at center of
cooking area
• Empty pot
• High temperatures
• Air vent is blocked
ERROR CODE
DESCRIPTION POSSIBLE CAUSES REMEDY
700mm
643mm
58.5mm
400mm
343mm
Table Top
at least
50mm
at least
50mm
at least 60mm
Air out Venlaon gap
(650W x 15H mm)
at least 60mm
Cut out dimensions
(643W x 343D mm)

c. Minimum dimensions of venlaon gaps
Inducon hob over an oven Inducon hob over an drawer
d. Connecon of the appliance to the supply mains
The connecon between the plug and the appliance should use the power cord provided by the manufacturer,
which should not be longer than 1.5m. If the socket is not accessible aer installaon, an addional means of
disconnecon must be provided for all poles
Note: If the power cord is damaged, it must be replaced by the manufacturer or its service department or similar
professional in order to avoid the dangerous.
The PCB is made in Germany, which complies with:
IEC 60335-2-6 : 2002 IEC 60335-2-9 : 2002
(in conjuncon with IEC 60335-1 : 2001)
5
Air out
Air in
Air out
Air in
Special point to note on installaon
Please do not disassemble the screws fixed on the sides on the top of the venlaon point of the inducon cooker.
These two screws are fixed to ensure a gap of 10mm is kept between the inducon cooker and the kitchen cabinet,
guaranteeing the inducon cooker to have a good venlaon. The manufacturer is not responsible for any faults
and problems caused by unauthorised disassembling.
more than 15mm more than 15mm
at least 100mm at least 100mm
at least 40mm at least 40mm
Built-in oven Wall Wall
less than 35 mm less than 35 mmPCB board PCB board
Table Top Table TopCeramic glass Ceramic glass
10mm 10mm

5. USER ADVICE
ENERGY SAVING TIPS
SAFEGUARDING THE ENVIRONMENT
AFTER-SALES SERVICE
For opmum results, observe the following advice:
• Use pots and pans whose boom diameter is equal to that of the cooking zone.
• Only use flat-boomed pots and pans.
• If possible, keep pot lids on when cooking.
• Cook vegetables, potatoes, etc. with lile water in order to cut down cooking me.
• Use a pressure cooker to save even more energy and me.
• Make sure you place the pot or pan in the centre of the cooking zone outlined on the hob.
• The symbol on the appliance, or on documentaon enclosed with the appliance, indicates that this product
must not be treated as household waste, but must be delivered to the nearest collecon centre for the recycling
of electrical and electronic appliances. Disposal must be carried out in accordance with local environmental
regulaons for waste disposal. For further informaon on the treatment, recovery and recycling of this
appliance, contact your competent local authority, the collecon service for household waste.
Packaging
The packaging material is 100% recyclable and marked with the recycling symbol
Electrical Appliances.
This appliance is marked in compliance with European Direcve 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring that this appliance is scrapped suitably, you can help prevent potenally damaging
consequences for the environment and health.
Declaraon of Conformity
• This hob is suitable for contact with foodstuffs and complies with EEC (CE) regulaon n. 1935/2004.
• The appliances are designed solely for use as cooking appliances. Any other use (e.g. for room heang) is
considered as improper use and potenally dangerous.
• The appliances are designed, built and sold in compliance with:
• safety objecves of the “Low Voltage” Direcve 2006/95/CE (which replaces 73/23/CEE and subsequent
amendments);
• Protecon requirements of EMC Direcve 89/336/EEC “Electromagnec compability”;
• the requirements of Direcve 93/68/EEC.
Before contacng Aer-sales Service:
• Try to solve the problem (see “Troubleshoong Guide”).
• Switch the appliance off, wait 30 seconds then switch it on again to see if the fault persists.
If aer the above checks the fault persists, contact the nearest Aer-sales Service.
Always provide:
• a brief descripon of the fault;
• the exact type and model;
• the service number (number aer the word Service on the rang plate) is located on the underside of the
cooktop or on the warranty booklet;
• your complete address and phone number. If any repairs are required, please contact an authorized Aer-sales
Service as indicated in the warranty.
Warning! Failure to comply with these instrucons may compromise the safety and quality of the product.
6

1. 重要安全資訊
建議的烹飪器皿直徑
本說明包含有關產品安全、使用、維護及保養的重要資訊，請仔細閱讀本說明書，並將本說明書存放
於容易提取的地方，以備將來查閱。
本爐具符合所有適用的安全及電磁兼容性法例。但安裝了心臟起搏器人仕應與本產品保持一定的安
全距離。基於無法確保市面上所有型號的心臟起搏器均符合本產品測試所需符合的標準，因此我們無
法保證本產品不會對相關物品構成有害的干擾。
有關棄置包裝物料：請依照本地規管機構訂立的廢物處置條例，謹慎棄置各種包裝物料。
本電磁爐的設計只適用作家庭產品，而一律不適用於其他用途。生產商對不正確使用的行為概不
負責。
基於安全考慮，在缺乏監督及適當指示之下(除非有人願意承擔使用風險)，本產品不適用於兒童及
任何身體、知覺、或智力功能障礙者，或缺乏使用經驗及知識者。
由於爐圈在使用時會達至非常高溫，請勿讓兒童接近本產品以免燙傷或燒傷。
操作面板上第4個條狀LED指示燈亮起為相對爐圈的「餘溫」提示，這時候爐圈的溫度仍在攝氏
65度以上。當指示燈亮起時，請勿觸摸加熱範圍，或放置物品於其表面上。
假若爐面出現損壞(玻璃崩裂或碎裂)，請勿使用本產品，並即時致電售後服務熱線求助。
有關產品的修理及其他工程，只應交由合資格的專業技工負責。
本爐具已備有隔熱保護裝置以保障內部電路避免受到外來源頭(如焗爐置於電磁爐下)產生的高熱而
引致損害。假若電路的溫度超越安全限制，隔熱保護裝置將被啟動，並自動切斷爐具的電源。操
作面板上同時會出現錯誤訊息(請參閱「一般故障處理」
)。當溫度回復至正常水平，本爐具將可重
新開啟。
使用爐具前，請確保加熱範圍和烹飪器皿底部抹乾。
請勿將金屬物件例如廚房用具(刀、叉、匙…)、煲蓋或其他類似物件放置於爐圈上，以免物件產生
高溫。
由於食用油脂容易搶火，烹飪時使用必須提高警惕。假若使用食油烹飪時出現搶火，切勿嘗試以
水將火撲熄。應將爐具關掉，立即將烹飪器皿蓋上，並讓烹飪器皿留在爐圈上冷卻。食油請按適
用條例處置。
當完成烹飪後，請按 掣。
注意及建議事項
使用前須知
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
重要事項：假如烹飪器具不符合正確使用的尺寸，電磁爐爐圈將不能啟動。
請使用有「適用於電磁爐」標誌(如左側圖示)的烹飪器皿。
開啟爐具前，請先將烹飪器皿放在選定的加熱範圍之上。
現有的烹飪器皿
可利用一塊磁石檢查烹飪器皿是否適用於電磁爐。
假如烹飪器皿不能夠被磁石吸住，即表示烹飪器皿
不適用。
確保烹飪器皿底部平滑，否則烹飪器皿底部有可能刮損爐具的玻璃陶瓷表面。同時檢查碟子。
請勿將空的烹飪器皿放在電磁爐上使用，尤其搪瓷或鋁製的烹飪器皿。這樣會導致電磁爐的玻璃陶
瓷表面及烹飪器具底部同時受損。
切勿把高溫的烹飪器皿放在操作面板上，這樣會導致面板受損。
1.
2.
3.
Ø
22厘米
OK NO
LØ
11厘米 22厘米
Ø
9厘米 18厘米
Ø
18厘米
S
7

如開啟電磁爐，持續按下 掣約2秒直至柱狀的指示燈(13-18)以及(25-30)從左到右被點亮。如要將電
磁爐關上，按下相同掣直至顯示燈號熄滅，這代表所有爐圈經已關掉。
假如曾經使用電磁爐，餘溫提示指示燈會保持亮著直至爐圈冷卻。
2. 操作指南
操作面板
設定電磁爐開/關
啟動和調節爐圈
本說明書內有關操作面板的圖案跟客戶所購買的電磁爐上圖案或有出入，但按鍵功能適用於
所有電磁爐型號。
1. 左爐開關鍵
2. 左爐火力減少鍵
3. 左爐火力增大鍵
4. 左爐最大火力快捷鍵
5. 時間制
6. 定時減少鍵
7. 定時增加鍵
8. 兒童安全鎖
9. 右爐開關鍵
10. 右爐火力減少鍵
11. 右爐火力增加鍵
12. 右爐最大火力快捷鍵
假如電磁爐被開啟後10秒內未有選用任何功能，電磁爐將自動關掉。
關上爐圈
用戶可以通過觸摸開關鍵 來開啟電磁爐。
按下“ ”掣將段數設定為“0”。
在開啟電磁爐並將烹飪器皿放置於所選定的爐圈後，利用按掣 或 按需要調節加熱設定。每一個
爐圈都可以利用按掣 或 來設定個別的加熱設定或按最大火力快捷鍵 ，從最小設定的“1”
到最大設定的“6”。
也可以同時按下“ ”和“ ”掣將火力調節到1檔。當左爐為6檔時，右爐最大為4檔。
8
烹飪區的尺寸顯示
當左邊烹飪區達到最大火力時，右邊烹飪區的功率將達到600瓦。
烹飪區 功率(千瓦) 直徑尺寸(毫米)
左邊 一般: 2.2110-220
右邊 一般: 1.3490-180

兒童安全鎖
這功能可將電磁爐操作上鎖以防止爐具被兒童意外地開啟。要啟用兒童安全鎖功能，先開啟電磁爐，
然後按下 掣。在鎖住狀態時，安全鎖按鍵上的指示燈(指示燈35)會亮起。
這時候，操作面板將被上鎖，除開/關機操作外。要解除上鎖操作，只須重複兒童安全鎖啟動步驟，上
鎖燈號將會熄掉，而電磁爐亦可隨即使用。
假如安全鎖按鍵上有積水、或被從烹飪器皿溢出的液體或其他食物覆蓋，此兒童安全鎖功能有可能意
外地遭開啟或關掉。
餘溫提示
本電磁爐於每個爐圈均設有餘溫提示，用作提醒使用者爐圈的溫度仍然很高。
當面板第4個條狀LED指示燈亮起，表示爐圈溫度仍相當高。當個別爐圈的餘溫提示燈亮著，可利用
該爐圈作特定的加熱或保溫用途，例如為食物保溫或為熔解牛油。
當爐圈冷卻後，面板顯示會自動關掉。
本電磁爐的所有爐圈均具備烹飪器皿自動探測功能。假如電磁器探測不到爐圈有烹飪器皿，面板顯示
錯誤碼“E3”。請確保烹飪器皿正確擺放，並符合「使用前須知」內對器皿的描述。
烹飪器皿提示錯誤或消失
9
操作面板提示
每段火力有其最長加熱時間，啟動產品加熱後，因應不同火力，一定時間內沒有按任何按鍵操作，產
品會自動關機，以確保安全。如所需的烹調火力及時間超過有關限制，請使用定時功能。
自動關閉電源
計時器可於同一時間為一個爐圈預設最長9小時59分鐘的烹飪時間。先選取需要預設時間設定的爐圈
， 然後觸摸 及按下計時器上的“ ”和“ ”掣設定所需的烹飪時間。完成設定後約數秒，計時器
將開始倒數。當預設時限結束，一聲訊號將會響起，同時爐圈將自動關掉。
要取消計時器設定，可按下“ ”掣直至顯示出現“0:0”。
計時器
注意事項！計時器功能只可於同一時間用於一個爐圈 。
右爐
420
300
240
180
120
90
左爐
自動關機時限(分鐘)
420
300
240
180
120
90
火力
1
2
3
4
5
6

3. 保養
4. 基本的安裝
維修及保養
一般故障排解
請依照以下步驟清潔爐具：
1. 使用潔淨的軟布、廚房吸水清潔布、或清洗玻璃陶瓷的專用清潔劑。切勿使用磨砂型海綿或含金屬
刷毛的抹布。
2. 遇有食物殘渣濺到玻璃陶瓷表面應即時清理。糖和高糖份的食物會破壞玻璃陶瓷表面，須盡快以專
用的玻璃刷清除。玻璃刷須小心使用。
3. 遇上頑固的污垢，使用玻璃刷和專用清潔劑。
4. 鹽、糖和沙粒會刮花爐具的玻璃陶瓷表面，如在爐具上出現，須盡快清理。
在聯絡客戶服務中心前：
● 請參閱「操作指南」，並按有關指示嘗試自行排除問題。
● 將電磁爐的電源接上，並檢查電力供應正常。
● 爐具應徹底清潔和風乾。
● 爐具開啟後，如面板顯示由字母和數字組成的編碼，請參閱以下錯誤碼列表找出相關問題成因和解
決方法的提示。
每次使用電磁爐前先行清潔，以避免損壞爐具表面，並防止積聚難以清除的污垢。進行清潔前，確保
爐圈關上及餘溫提示訊號沒有亮起。
．切勿使用蒸氣清潔用具清洗電磁爐。
．定期檢查和清理積藏於爐具底部入氣及出風口的塵垢。假若不予理會，將影響電子模組部
份的散熱及冷卻操作，並導致爐具的效能下降。
E2
烹飪被中斷 ● 待爐具冷卻後重新啟用
● 清除通風孔
E3
操作面板因碰到鍋子異常
導致關掉
● 操作面板上或有積水或擺放了
烹飪器皿
● 使用不適用的爐具
● 烹飪時爐具被移動
● 烹飪時爐具被移除
● 使用合適的爐具
● 將爐具放在爐的正中
警告：假若於使用電磁爐後無法關掉爐具，請立即切斷爐具的電源供應。
● 鍋子是空的
● 溫度過高
● 空氣通風被堵住
10
錯誤碼 描述 可能成因 解決辦法
額定電壓、額定負載和電源均列出在銘牌上。請確保它們與您家裏的電源相配。
a. 櫃面開孔尺寸 b. 位置和尺寸大小固定裝置
700毫米
343毫米
400毫米
643毫米
至少50毫米 至少50毫米 至少60毫米
至少60毫米
櫃體表面
58.5毫米
開孔尺寸
(643闊 x 343深 毫米) 排氣 通氣口
(650闊 x 15高 毫米)

注意：如果電源軟線損壞，爲了避免危險，必須由製造廠或其維修部或類似的專業人員來更換。
連接電磁爐和電源線之間的距離不可以超過1.5米，開關盒必須是雙極的。
請勿自行拆除電磁爐通風口位置上面左右兩端的定位螺絲，此兩個定位螺絲確保電磁爐與廚櫃之間保
持有10毫米空隙，以保證電磁爐的良好通風。未經廠方同意自行拆除而引起故障問題，廠方將不對其
負責。
安裝特別注意事項
主板制造於德國，符合下列標準：
IEC 60335-2-6：2002 IEC 60335-2-9：2002
(連同 IEC 60335-1：2001)
11
c. 最小尺寸的通風間隙
d. 連接電源線之要求
最少15毫米
最少100毫米
少於35毫米
最少40毫米
10毫米
電腦底盤
陶瓷玻璃
出氣位
入氣位
桌面
牆
最少15毫米
最少100毫米
少於35毫米
最少40毫米
10毫米
電腦底盤
陶瓷玻璃
出氣位
入氣位
桌面
牆
嵌入式焗爐

5. 使用建議
省電錦囊
保護環境
售後服務
為發揮最大省電成效，請依照以下建議：
● 使用的烹飪器皿底部直徑最好與爐圈相同。
● 盡量使用平底的烹飪器皿。
● 盡可能在烹飪時將器皿蓋上。
● 烹調蔬菜、馬鈴薯等食物時加入少量水份以縮減烹調的時間。
● 使用壓力煲可節省更多電力和烹調時間。
● 確保將烹飪器皿擺放於電磁爐上標示的爐圈正中央。
● 出現在產品或隨產品附上的文件資料中的 圖案，代表產品不可視作家居廢料處置，而必須移送往
最就近的電子產品循環回收站處理。棄置產品時必須依照所在地的廢料處置法規進行。有關處置、
修復及回收本產品的更多資料，可向閣下所在地的相關政府機構或家居廢料收集服務公司查詢。
包裝物料
本產品的包裝物料為百份百可循環再用物料，並附有可循環再用標籤 。
電子產品
本產品已標示符合歐盟就廢電子電機產品發出的2002/96/EC指令。只要確保本產品經適當銷毀，便可
避免對環境和人類健康帶來潛在傷害的後果。
符合性聲明
● 本爐具適宜與食物接觸，並符合EEC(CE標誌)1935/2004號指令。
● 本產品的設計僅用作煮食電器用途。任何其他用途(例如用作室內發熱)均一律視作不適當並可能構
成危險。
● 本產品的設計、製造和銷售均符合：
● 2006/95/CE低電壓指令(用以取代73/23/CEE及其後繼修改)對安全產品的要求；
● 89/336/EEC電磁兼容性指令對安全保障的要求；
● 93/68/EEC指令的要求。
﹡如本文件的英文及中文版本有任何差異，概以英文版本為準。
在聯絡客戶服務中心前：
● 先嘗試自行解決問題(參閱「一般故障排解」
)
● 關掉電磁爐，等候30秒再行開啟電磁爐查看問題是否持續。
假如進行了上述檢查之後問題仍然持續，請聯絡最就近的客戶服務中心。
須要告知的內容：
● 簡述問題；
● 爐具的種類和型號；
● 標記在爐具底部的服務編號(即功率標籤上「服務」字樣後的一組號碼)。有關編號亦可在保用證上找
到。
● 詳細的客戶地址和電話聯絡號碼。如有需要進行維修，請聯絡保用證上列明的售後服務中心。
警告：如沒有按照此說明書指示使用產品，有可能對產品的安全和品質構成影響。
12