Whirlpool 4ET18ZK User manual

TLfl ol*
4a
HOmeAppliances
UseAndCare
A Note To You
Important Safety
Instructions
Parts And Features
Before Using Your
Refrigerator
Using Your
Refrigerator
Caring For Your
Refrigerator
A
2
3
4
5
7
13
Food Storage Guide 15
NO-FROST REFRIGERATOR-FREEZERS Mq
MODEL 4ET18ZK

A Note To You
Thank you for buying a Whirlpool appliance.
You have purchased a quality, world-class home appliance. Years of engineering experience have gone
into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have
developed this Use and Care Guide. It is full of valuable information on how to operate and maintain
your appliance properly and safely. Please read it carefully. Also, please complete and mail the Owner-
ship Registration Card provided with your appliance. This will help us notify you about any new informa-
tion on your appliance.
Your safety is important to us.
This guide contains safety symbols and statements. Please pay special attention to these symbols and
follow any instructions given. Here is a brief explanation of the use of each symbol.
This symbol will help alert you to such dangers as
personal injury, burns, fire and electrical shock. This symbol will help you avoid actions which
could cause product damage (scratches, dents,
etc.) and damage to your personal property.
Help when you need it.
If you ever have a question concerning your appliance’s operation, or if you need service, first see “If
You Need Assistance Or Service” on page 17. If you need further help, feel free to call an authorized
Whirpool service company. When calling, you will need to know your appliance’s complete model
number and serial number. You can find this information on the model and serial number label (see
diagram on page 4). For your convenience, we have included a handy place below for you to record
these numbers, the purchase date from the sales slip and your dealer’s name and telephone number.
Keep this book and the sales slip together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone

Important Safety Instructions
To reduce the risk of fire, electrical shock, or injury when using your
refrigerator, follow these basic precautions:
9 Read all instructions before using the
l Never clean refrigerator parts with flammable
refrigerator. fluids. The fumes can create a fire hazard or
l Child entrapment and suffocation are not explosion.
problems of the past. Junked or abandoned . FOR YOUR SAFETY l
refrigerators are still dangerous _. even if
they will “just sit in the garage a few days.” DO NOT STORE OR USE GASOLINE OR
If you are getting rid of your old refrigerator, OTHER FLAMMABLE VAPORS AND LIQUIDS
do it safely. Help prevent accidents. IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE. THE FUMES CAN CREATE A
l Never allow children to operate, play with, or FIRE HAZARD OR EXPLOSION.
crawl inside the refrigerator.
- SAVE THESE INSTRUCTIONS -
Help us help you
Please:
l Install and level the refrigerator on a floor that
will hold the weight and in an area suitable for
its size and use.
l Do not install the refrigerator near an oven,
radiator or other heat source.
l Do not use the refrigerator in an area where the
room temperature will fall below 13°C (55°F).
l Keep the refrigerator out of the weather.
. Connect the refrigerator only to the proper kind
of outlet, with the correct electrical supply and
grounding.
l Do not load the refrigerator with food before it
, .
Also, remove tape and any inside labels (except
the model and serial number label) before using
the refrigerator.
To remove any remaining glue:
l Rub briskly with thumb to make a ball, then
remove.
OR
. Soak area with liquid hand dishwashing
detergent before removing glue as described
above. Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive cleaners.
These can damage the material. See “lmpor-
tant Safety Instructions” above.
nas time to get properly cold.
9 Use the refrigerator only for the uses described
in this manual.
l Properly maintain the refrigerator.
l Be sure the refrigerator is not used by anyone
unable to operate it properly.
NOTE: Do not remove any permanent instruction
labels inside your refrigerator. Do not remove the
Tech Sheet fastened under the refrigerator at the
front.
3

Parts And Features
This section contains captioned illustrations of your appliance. Use them to become familiar with where
all parts and features are located and what they look like.
Ice cube trays Freezer shelf
! :
Ice bin -
Control panel
Model and
serial number
label (on side
wall)
Meat drawer -
Utility bin -
Adjustable
wire shelves *
Crisper cover
Crispers A
Leveling rollers’
(behind base grille) \ Base grille
Utility
,compartment
Butter
-compartment
H Shelf glide
Extra deep
/
door shelf
Refrigerator
control Exterior moisture Light
control switch Freezer
control

Before Using Your
Refrigerator
Page Page
...............,.............. ... ... ... ..............
5 Installing it properly ........................................5
............................ ...... ....... .........
5 Leveling it ..,...................................................... 6
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
a power source, install it and level it.
Cleaning it
Clean your refrigerator before using it, if neces-
sary. See cleaning instructions on page 13.
Plugging it in
Recommended Grounding Method
A 220 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical supply is
required. It is recommended that a separate
circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord.
Installing it properly
1. Allow 1.25 cm (% inch) space on each side
and at the top of the refrigerator for ease of
installation.
2. If the hinge side of the refrigerator is to be
against a wall, you might want to leave extra
space so the door can be opened wider.
3. The refrigerator can be flush against the wall.
5

Leveling it
Your refrigerator has 2 front leveling screws-one
on the right and one on the left. To adjust one or
both of these, follow the directions below.
1. Remove base grille. (See page 11.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclockwise.
4. Check with level.
5. Replace base grille. (See page 11.)
Front
roller
Right to raise;
left to lower
Use a screwdriver
6

I
Using Your Refrigerator
In This Section
Page
Page
Setting the controls -7 ........................................... .
Changing the control settings.. ........................ .B
Adjusting the shelf glide .................................... 9
Adjusting the refrigerator shelves ................... .9
Removing the meat drawer and cover.. ........... .9
Removing the crispers and crisper cover..
....
1 o
Removing the freezer shelf.. ............................ 1o
Using the ice cube trays ............................... 1C
Changing the light bulbs.. ............................. 1I
Removing the base grille .............................. 1.i
Reversing the door swing ............................ .I2
Understanding the sounds you may hear.. .12
Saving energy ................................................ 12
In order to obtain the best possible results from your refrigerator, it is important that you operate it
properly. This section will tell you how to do just that.
Setting the controls
Temperature controls
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in
for the first time:
1. Set the Refrigerator Control to 4.
Refrigerator Control adjustments range from
1 (warmest) to 8 (coldest).
2. Set the Freezer Control to C.
Freezer Control adjustments range from
A (coldest) to D (warmest).
3. Give the refrigerator time to cool down
completely before adding food. This may take
several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls will be set correctly when
milk or juice is as cold as you like and when
ice cream is firm. If you need to adjust these
settings, see “Changing the control settings”
on page 8.
Exterior moisture control
The Exterior Moisture Control operates electric
heaters around the door openings. These heaters
help keep moisture from forming on the outside
of the refrigerator cabinet.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator cabinet.
7

Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide.
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
l Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
RECOMMENDED
CONTROL SElTINGS:
Refrigerator 6
Freezer D
Refrigerator 4
Freezer A
Refrigerator 2
Freezer A
If ICE isn’t Heavy ice usage
MADE FAST Very cold room temperature
ENOUGH (can’t cycle often enough)
Refrigerator 4
Freezer A
t
If BOTH Door opened often Refrigerator
SECTIONS Large amount of food added Freezer
are TOO WARM Very warm or very cold room
temperatures
8
-.

Adjusting the shelf glide
The shelf glide can be used to secure odd-
shaped items or to separate other items.
To adjust the shelf glide:
1. Grasp glide.
2. Slide glide along track.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator.
To remove shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear shelf hooks into the slots in the
shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into slots.
Lower front of shelf to level position.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
4. Replace cover in reverse order.
Pull out to the stop, lift
the front and pull again.

Removing the crispers and crisper cover
To remove the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push up glass insert from the bottom, then
slide it out with both hands,
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
Replace metal cover support on wall supports
in front section of cabinet.
Fit back corner of cover frame into notch
supports on walls of refrigerator, then lower
front onto metal cover support.
Slide back of glass insert into cover frame.
Then lower front to level position.
Pull
out to the stop,
lift the front
and pull again.
Remove the
glass insert.
Lift front of
cover frame,
then the back.
Removing the freezer shelf
To remove the shelf:
1. Lift front of shelf slightly.
2. Lift back of shelf off supports,
3. Replace in reverse order.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
10

Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main
power supply.
Failure to do so could result in electrical
shock or personal injury.
To change the refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove
bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace a bulb with
one of the same size and shape.
Removing the base grille
To remove the grille: Condenser coils
1. Open refrigerator door.
2. Pull base grille forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To replace the grille:
1. Line up grille support tabs with metal clips,
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 14.
11

Reversing the door swing
You can change the hinges on your refrigerator
so the doors open the other way. Refer to the
instruction sheet included with your refrigerator.
Understanding the sounds you may hear
Your new refrigerator may make sounds that your
old one didn’t. Because the sounds are new to
you you might be concerned about them. Don’t
be. Most of the new sounds are normal. Hard
surfaces like the floor, walls and cabinets can
make the sounds seem louder.
The following describes the kinds of sounds
that might be new to you, and what may be
making them.
Slight hum, soft hiss
Water sounds
When the refrigerator stops running, you may
hear gurgling in the tubing for a few minutes after
it stops. You may also hear defrost water running
into the defrost water pan.
Running sounds
Your refrigerator has a high-efficiency compres-
sor and motor. It will run longer than older
designs. It may even seem to run most of the
You may hear the refrigerator’s fan motor and
moving air. time
Clicking or snapping sounds
The thermostat makes a definite click when the
refrigerator stops running. It also makes a sound
when the refrigerator starts. The defrost timer will
click when the defrost cycle starts.
Saving energy
You can help your refrigerator use less electricity.
l Check door gaskets for a tight seal. Level the
cabinet to be sure of a good seal.
l Clean the condenser coils regularly.
l Open the door as few times as possible. Think
about what you need before you open the door.
Get everything out at one time. Keep food
organized so you won’t have to search for what
you want. Close door as soon as food is
removed.
l Go ahead and fill up the refrigerator, but don’t
overcrowd it so air movement is blocked.
l It is a waste of electricity to set the refrigerator
and freezer to temperatures colder than they
need to be. If ice cream is firm in the freezer
and drinks are as cold as your family likes
them, that’s cold enough.
l Make sure your refrigerator is not next to a heat
source such as a range, water heater, furnace,
radiator or in direct sunlight.
12

Caring For Your Refrigerator
In This Section
Page
Cleaning your refrigerator ................................ 3
Holiday and moving care ........_........................ ~4
Page
Power interruptions .......................................15
Your refrigerator is built to give you many years of dependable servrce. However, there are a few things
you can do to help extend its product life. This section will tell you how to clean your refrigerator and
what to do when going on holiday, moving or during a power outage.
Cleaning your refrigerator
Both the refrigerator and freezer sections defrost
automatically. But both should be cleaned about
once a month to help prevent odors from building
up. Spills should be wiped up right away. Personal Injury Hazard
To clean your refrigerator, turn the Refrigerator Refrigeration system tubes are located near
Control to OFF, unplug it, take out all removable the defrost pan and can become hot.
parts and clean the refrigerator according to the Remove and install defrost pan carefully.
following directions. Failure to do so could result in personal
injury.
PART WHAT TO USE HOW TO CLEAN I
Removable parts Sponge or cloth with mild
l Hand wash, rinse and dry thoroughly.
(shelves, crisper, etc.) detergent and warm water
Outside Sponge, cloth or paper towel 9 Wash outside of cabinet. Do not use
with mild detergent, warm abrasive or harsh cleaners.
water and an appliance wax
(or good auto paste wax)
l Rinse and dry thoroughly.
l Wax painted metal surfaces at least twice
a year. Apply wax with a clean, soft cloth.
Waxing painted metal surfaces
provides rust protection.
Do not wax plastic parts.
Inside walls Sponge, soft cloth or paper
(freezer should be towel with baking soda or
allowed to warm up mild detergent and warm
so cloth won’t stick) water
l Wash with mixture of warm water and
- mild detergent, or
- baking soda (26 g [2 tablespoons]
to 0.95 L [I quart] of water).
. Rinse and dry thoroughly.
Door liners and
gaskets Sponge, soft cloth or paper
l Wash, rinse and dry thoroughly.
towel with mild detergent
and warm water DO NOT USE cleaning waxes, concen-
trated detergents, bleaches or cleaners
containing petroleum on plastic parts.
Plastic parts
(covers and panels) Soft, clean sponge or soft,
clean cloth with mild
detergent and warm water
l Wash, rinse and dry thoroughly.
DO NOT USE paper towels, window
sprays, scouring cleansers or flam-
mable fluids. These can scratch or
damage material. See “Important Safety
Instructions” on page 3.
continued on next page
13

-__-__~I.. ~__-~ -
PART WHAT TO USE HOW TO CLEAN
-
Defrost pan Sponge or cloth with
l Remove base grille. (See page Il.)
(behind refrigerator mild detergent and
l To remove defrost pan, lift pan over wire brace
on top of motor) warm water (remove tape; if any).
l Wash, rinse and dry thoroughly.
. Replace with notched corner to the rear. Push it
in all the way.
l Make sure defrost pan drain tube is pointing
into pan.
l Reolace base arille.
Condenser coils
Floor under
refrigerator
Vacuum cleaner with
extended narrow
attachment
Floor cleaners
l Remove base grille.
l Vacuum coils when dusty or dirty. Coils may
need to be cleaned as often as every other
month.
. Replace base grille.
9 Roll refrigerator out only as far as the water
supply line allows.
l Clean floor.
l Roll refrigerator back into place.
l Check to see if the refrigerator is level.
Holiday and moving care
Long holidays Short holidays
Remove all the food if you are going for a month
or more.
Unplug the refrigerator. Clean, rinse it well and
dry. Tape rubber or wood blocks to the tops of
both doors to prop them open far enough for air
to get in. This will keep odor and mold from
building up.
No need to shut off the refrigerator if you will be
away for less than four weeks. Use up perish-
ables; freeze other items.
Moving
Remove all food. Pack frozen food in dry ice.
Unplug the refrigerator and clean it thoroughly.
Personal Injury Hazard
Do not allow children to climb on, play near
or climb inside the refrigerator when the
doors are blocked open. They may become
iniured or traooed.
Take out all removable parts. Wrap all parts
well and tape them together so they don’t shift
and rattle. Screw in the leveling legs; tape the
doors shut; and tape the electric cord to the
cabinet.
When you get to your new home, put every-
thing back and refer to page 5.
To restart refrigerator, see “Using Your Refrigera-
to? on page 7.
14

--.
Power interruptions
If electricity goes off, call the power company.
Ask how lona Dower will be off.
1.
2.
- I
If service is to be interrupted 24 hours or less,
keep both doors closed. This will help foods
stay frozen.
If service is to be interrupted longer than
24 hours:
(a) Remove all frozen food and store in a
frozen food locker.
OR
3. A full freezer WIIIstay cold longer than a partly
filled one. A freezer full of meat will stay cold
longer than a freezer full of baked goods. If
food contains ice crystals, it may be safely
refrozen, although the quality and flavor may
be affected. If the condition of the food is poor
or if you feel it is unsafe, dispose of it.
(b) Place 0.9 kg (2 Ibs.) of dry ice in freezer for
every cubic foot of freezer space. This will
keep food frozen for 2 to 4 days. Wear
gloves to protect your hands from dry ice
burns.
OR
(c) If neither a food locker or dry ice is avail-
able, use or can perishable food at once.
Food Storage Guide
In This Section
Page
Storing fresh food ............................................ 35 Page
Storing frozen food ........................................ 16
There is a correct way to package and store refrigerated or frozen food. To keep food fresher, longer,
take the time to study these recommended steps.
Storing fresh food
Food placed in the refrigerator should be
wrapped or stored in air and moisture proof
material. This prevents food odor and taste
transfer throughout the refrigerator. For dated
products, check code date to ensure freshness.
Leafy vegetables
Remove store wrapping and trim or tear off
bruised and discolored areas. Wash in cold water
and drain. Place in plastic bag or plastic con-
tainer and store in crisper.
Vegetables with skins
(carrots, peppers)
Store in crisper, plastic bags or plastic container.
Fruit
Wash, let dry and store in refrigerator in plastic
bags or crisper. Do not wash or hull berries until
they are ready to use. Sort and keep berries in
their store container in a crisper, or store in a
loosely closed paper bag on a refrigerator shelf.
Eggs
Store without washing in the original carton on
interior shelf.
Milk
Wipe milk cartons. For best storage, place milk
on intenor shelf.
15

Butter or margarine
Keep opened butter in covered dish or closed
compartment. When storing an extra supply,
wrap in freezer packaging and freeze.
Cheese
Store in the original wrapping until you are ready
to use it. Once opened, rewrap tightly in plastic
wrap or aluminum foil.
Leftovers
Cover leftovers with plastic wrap or aluminum foil.
Plastic containers with tight lids can also be used.
Meat
Most meat can be stored in original wrapping as
long as it is air and moisture proof. Rewrap if
necessary. See the following chart for storage
times.
Ground beef 1 to2
Steaks and roasts 3 to 5
Cured meats 7to10
Bacon
Cold cuts 5 to 7
3 to 5
Variety meats 1 to2
* If meat is to be stored longer than the times
given, follow the directions for freezing.
NOTE: Fresh fish and shellfish should be used
the same day as purchased.
Storing frozen food
The freezer section is designed for storage of
commercially frozen food and for freezing food at
home.
NOTE: For further information about preparing
food for freezing or storage times, contact your
local Cooperative Extension Service or check a
freezer guide or cookbook.
Packaging
The secret of successful freezing is in the
packaging. The way you close and seal the
package must not allow air or moisture in or out.
Packaging done in any other way could cause
food odor and taste transfer throughout the
refrigerator and drying of frozen food.
Packaging recommended for use:
l Rigid plastic containers with tight-fitting lids
l Straight-sided canning/freezing jars
l Heavy-duty aluminum foil
l Plastic-coated paper
l Non-permeable plastic wraps (made from a
Saran film)
Follow package or container instructions for
proper freezing methods.
Do not use:
l Bread wrappers
l Non-polyethylene plastic containers
l Containers without tight lids
l Waxed paper
9 Waxed-coated freezer wrap
l Thin, semi-permeable wrap
The use of these wrappings could cause food
odor, taste transfer and drying of frozen food.
Freezing
Do not expect your freezer to quick-freeze any
large quantity of food. Put no more unfrozen food
into the freezer than will freeze within 24 hours.
(No more than 0.9 to 1.4 kg [2 to 3 pounds] of
food per cubic foot of freezer space.) Leave
enough space for air to circulate around pack-
ages Be careful to leave enough room at the
front so the door can close tightly.
Storage times will vary according to the quality
of the food, the type of packing or wrap used (air
and moisture proof) and the storage temperature
(which should be -17.8”C [O’F]).
16

If You Need Assistance
Or Service
This section is designed to help you save the cost of a service call. First we outline possible problems,
their causes and their solutions. However, you may still need assistance or service. When calling an
authorized Whirpool service company for help or calling for service, you will need to provide a complete
description of the problem, your appliance’s complete model and serial numbers and the purchase date.
(See page 2.) This information is needed to respond to your request properly.
1. Before calling for assistance ...
Performance problems often result from little things you can find and fix without tools of any kind. Please
check the chart below for problems you can fix. It could save you the cost of a service call.
PROBLEM POSSIBLE CAUSE SOLUTION
Your refrigerator The power supply cord is not Firmly plug power cord into a live circuit
will not operate plugged into a live circuit with with proper voltage. (See page 5.)
proper voltage.
A household fuse has blown or Replace household fuse or reset circuit
circuit breaker tripped. breaker.
The Refrigerator Control is not Set Refrigerator Control to a numbered
set correctly. setting. (See page 7.)
Unfamiliar
sounds or a
rattling/jingling
noise
There is something on top of or
behind the refrigerator.
The sounds are normal.
Remove item from on top of or behind
the refrigerator.
New features on your new refrigerator
make new sounds. (See “Understanding
the sounds you may hear” on page 12.)
There is water in This is normal in hot, muggy Make sure the refrigerator is level so the
the defrost pan weather. The pan may even be pan does not overflow.
half full.
The lights do
not work A household fuse has blown or
circuit breaker tripped.
The power supply cord is not
plugged into a live circuit with
proper voltage.
The bulb is burned out.
Replace household fuse or reset circuit
breaker.
Firmly plug power cord into a live circuit
with proper voltage. (See page 5.)
Replace bulb. (See page 11.)
The motor
seems to run
too much
The condenser coils are dirty.
It is hot outside or in the room.
Thedoorhasbeenopened
frequently.
A large amount of food has
been put in at one time.
Clean the coils (See page 14.)
On hot days, or if the room is too warm,
the motor naturally runs longer.
Open the door as few times as possible.
The motor will run longer in order to cool
down the interior when food is added.
17

Remember:
Motor running time depends on different things:
number of door openings, amount of food stored,
temperature of the room, setting of controls, etc.
Your new refrigerator may be larger than your
old one so it has more space to be cooled. It also
has a regular freezer instead of a frozen food
compartment. All this means better refrigeration
and may require more running time than your old
one.
2. If the problem is not due to
one of the items listed in
Step 1 ...
Contact the dealer from whom you purchased
the unit or an authorized Whirpool service
company.
3. If you need FSP* replace-
ment parts ...
FSP is a protected trademark of Whirlpool
Corporation for quality parts. Look for this symbol
of quality whenever you need a replacement part
for your Whirlpool appliance. FSP replacement
parts will fit right and work right, because they
are made to the same exacting specifications
used to build every new Whirlpool appliance.
To locate FSP replacement parts in your area,
contact the dealer from whom you purchased the
unit or an authorized Whirpool service company.
18

WHIRLPOOL
Refrigerator Warranty
LENGTH OF WARRANTY 1 WHIRLPOOL WILL PAY FOR
FULL ONE-YEAR WARRANTY FSP* replacement parts and repair labor to correct defects in
From Date of Purchase materials or workmanship. Service must be provided by an
authorized Whirlpool service company.
FULL FIVE-YEAR
WARRANTY
From Date of Purchase
FSP replacement parts and repair labor to correct defects in
materials or workmanship in the sealed refrigeration system.
These parts are:
1. Compressor
2. Evaporator
3. Condenser
4. Drier
5. Connecting tubing
Service must be provided by an authorized Whirlpool service
company.
WHIRLPOOL WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of the refrigerator.
2. Instruct you how to use the refrigerator.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace light bulbs.
6. Repairs when refrigerator is used in other than normal, single-family household use.
C. Pickup and delivery. This product is designed to be repaired in the home.
D. Damage to refrigerator caused by accident, misuse, fire, flood, acts of God or use of products not
approved by Whirlpool.
E. Any food loss due to product failure.
F. Repairs to parts or systems caused by unauthorized modifications made to the appliance.
s-92
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
Outside the United States, a different warranty may apply. For details, please contact your
authorized Whirlpool distributor or military exchange.
PART NO. 2166560
0 1993 Whirlpool Corporation * Trademark / SM Sewce Mark of Whirlpool Corpotatlon. U.S.A. Pnnied I” U.S.A.