Whirlpool IN600S User manual

Home Appliances
IN600S/IN900S
Instruction Manual

4
GB
CHARACTERISTICS
Dimensions
Components
Hood Type IN600S IN900S
L
598 898
Ref. Q.ty
Product Component
1
1Hood Body, co plete with: Controls, Light,
Blower, Filters
8 1Directional Air Outlet grille
9 1Reducer Flange ø 150-120
20 1Closing ele ent
Ref. Q.ty
In tallation Component
12a
4Screws 4,2 x 44,4
12e 2Screws 2,9 x 9,5
Q.ty
Documentation
1Instruction Manual
0÷152
280
L
260
ø 150
12e
8
9
1
12a
20

7
GB
ELECTRICAL CONNECTION
•Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.
•When opening the sliding carriage for the first time after installing the hood, pull it out briskly until it
clicks.
USE
Control panel
L Light Switches the lighting system on
and off
L Light Switches the lighting system on
and off
M Motor Switches the extractor motor on
and off
M Motor Switches the extractor motor on
and off
V Speed Sets the operating speed of the ex-
tractor:
1. Low speed, used for a contin-
uous and silent air change in
the presence of light cooking
vapour.
2. Medium speed, suitable for
most operating conditions
given the optimum treated air
flow/noise level ratio.
3. Maximum speed, used for
eliminating the highest cook-
ing vapour emission, includ-
ing long periods
V Speed Sets the operating speed of the ex-
tractor:
I. Low speed, used for a contin-
uous and silent air change in
the presence of light cooking
vapour.
II. Maximum speed, used for
eliminating the highest cook-
ing vapour emission, includ-
ing long periods
L
M-V
L
M - V
0
1
0
1
2
3

8
GB
MAINTENANCE
Grease filters
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
CLEANING MULTILAYER METAL GREASE FILTERS
REPLACING SYNTHETIC GREASE FILTER
The filters must be cleaned every 2 months of oper-
ation, or more frequently with heavy usage, and can
be washed in a dishwasher.
•Remove the filters one at a time, after
disconnecting the relative fastening elements.
•Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
•When refitting the filters, make sure that the
handle is visible on the outside.
The filters must be cleaned every 2 months of oper-
ation, or more frequently with heavy usage, and can
be washed in a dishwasher.
•Release the filter retaining grill using the lateral
sliding handles.
•Remove the filter retaining clips.
•Remove and wash the filters. Allow them to dry
before refitting.
•Replace the filters on the grill, fix them in
position using the filter retaining clips and close
the filter retaining grill.
The filter is not washable and cannot be regenerat-
ed, and must be replaced every 2 months of use, or
more frequently with heavy usage.
•Release the filter holder frame using the lateral
sliding handles.
•Remove the fIlter retaining clips.
•Replace the saturated synthetic filter.
•Fix the new synthetic filter using the retaining
clips and close the filter holder frame.

9
GB
Odour filters (Recirculation version)
REPLACING ACTIVATED CHARCOAL FILTERS
These filters are not washable and cannot be regen-
erated, and must be replaced every 4 months of op-
eration, or more frequently with heavy usage.
•Remove the grease filters.
•Removethesaturatedactivatedcharcoalfiltersas
shown ( A ).
•Fit new filters ( B ).
•Replace the grease filters.
A
B

10
GB
This appliance conforms to European Low Voltage Directive 73/23/CEE governing electrical safety, European Directive 89/336/
CEE on Electromagnetic Compatibility and Directive 93/68/CEE regarding CE Marking.

Home Appliances
Star Service Hotline [phone]
www.whirlpool.com.hk
IFU0203IN600IN600S/IN900S436000612 00 - 020430