Whirlpool AWO/D 9562 User manual

GB
*h5h/7h$ù,5,7ø75(ùø0/(59(68.$d$./$5,
<$1/,ù0217$-'$1.$<1$./$1$%ø/ø5
&ø+$=,$6/$d$/,ù0$67$1',h=(5ø1'(
7$ù,0$<,1,=
INSTALLATION GUIDE
0217$-.,/$98=8
•Read this “INSTALLATION GUIDE” before operating.
•Keep this “INSTALLATION GUIDE” for future reference.
•Read the general recommendations about disposing of packaging in the
Instructions for use.
•.XOODQÕPGDQ|QFHEX³0217$-.,/$98=818´RNX\XQX]
•X³0217$-.,/$98=818´LOHULGHJHUHNHELOHFH÷LQGHQGROD\ÕVDNOD\ÕQÕ]
•$PEDODMPDO]HPHOHULQLQLPKDVÕKDNNÕQGDELOJLLoLQNXOODQÕPWDOLPDWODUÕQGD
\D]ÕOÕJHQHO|QHULOHULRNX\XQX]
TR
NOISE, EXCESSIVE VIBRATIONS AND WATER
LEAKAGES CAN BE CAUSED BY INCORRECT
INSTALLATION.
NEVER MOVE THE APPLIANCE BY CARRYING IT AT
THE WORKTOP.
10600834.fm Page 1 Thursday, January 11, 2007 6:07 PM
Black process 45.0° 130.0 LPI

2
7(0ø1('ø/(13$5d$/$5
PARTS SUPPLIED
•.oNSDUoDODUDPEDODMÕ
Package with small items
.XOODQÕPWDOLPDWÕ
Instruction for use
SODVWLNNDSDNEHOLUOLPRGHOOHUGHSODVWLNNDSDNODU
FLKD]ÕQDUNDWDUDIÕQDLOL
ú
WLULOPL
ú
WLU
4 plastic caps (for certain models, the plastic caps
are attached to the back of the appliance)
6RPXQDQDKWDUÕ
Wrench
•*LUL
ú
KRUWXPXPDNLQHQLQLoLQGHGLUYH\D]DWHQ
PRQWHHGLOPL
ú
WLU
Inlet hose (inside the machine or already installed)
•³8´NÕYUÕPOÕSDUoDPDNLQHQLQLoLQGHGLUYH\D]DWHQ
PRQWHHGLOPL
ú
WLU
“U”-bend (inside the machine or already installed)
A
B
C
D
E
10600834.fm Page 2 Thursday, January 11, 2007 6:07 PM
Black process 45.0° 130.0 LPI

3
1$./ø<(&,9$7$/$5,1,d,.$57,1,=
REMOVE TRANSPORT BOLTS!
g HPOL1DNOL\HFÕYDWDODUÕ Õ oÕNDUWÕOPDPDVÕFLKD]Õ KDVDUJ|UPHVL H HGH ROXU
Important: Not removed transport bolts cause damages to the appliance.
hUQOHELUOLNWHYHULOHQ&VRPXQDQDKWDUÕLOHG|UWDGHWYLGD\ÕRNL
ú
DUHWLQHEDNÕQÕ]V|NQ]
Unscrew the four screws (see arrows) with the wrench Csupplied.
6DGHFHH÷HUQDNOL\HFÕYDWDODUÕQÕQNRQXPODUÕD
ú
D÷ÕGDVROWDUDIWDYHULOHQUHVLPGHNLJLELLVH
9LGDODUÕGHOLNOHULQRUWDVÕQDND\GÕUÕQÕ]
Only if the transport bolts’ positions look as on the left sketch below: Move the screws to the
center of the holes.
9LGDODUÕUHQNOLSODVWLNDUDOD\ÕFÕLOHELUOLNWHoHNLSoÕNDUWÕQÕ]
Pull out the screws together with the coloured plastic spacer.
'HOLNOHULNDSDWPDNLoLQ
GHOL÷LQJHQL
ú
NÕVPÕQGD\HUDODQYHUQOHELUOLNWHYHULOHQSODVWLNNDSDNODUÕ WDNÕQÕ]YH
EXQODUÕ\HULQHRWXUXQFD\DNDGDURN\|QQGHND\GÕUÕQÕ]EN]UHVLP,
9(<$PRGHOHED÷OÕRODUDN
FLKD]ÕQDUNDNÕVPÕQDLOL
ú
WLULOPL
ú
SODVWLNNDSDNODUÕGHOLNOHUHLWHUHNWDNÕQÕ]EN]UHVLP,,
To seal the holes, either
- insert the supplied plastic caps B supplied in the wide part of the hole and slide them in the
direction of the arrow until they click into place (see picture I)
OR (depending on the model):
- push the plastic caps attached on the back of the appliance on the holes (see picture II).
1
2
3
4
III
10600834.fm Page 3 Thursday, January 11, 2007 6:07 PM
Black process 45.0° 130.0 LPI

4
g HPOL
d
DPD
ú
ÕUPDNLQHQL]LQWDKOL\HKRUWXPXFLKD]ÕQLoHULVLQGHLVHEN]³7$+/ø<(
[phone] $ö/$10$6,´UHVLP,,QDNOL\HFÕYDWDODUÕQÕoÕNDUPDGDQg1&(
WDKOL\HKRUWXPXQXoÕNDUWÕQÕ]DNVLKDOGHPDNLQH\LVRQNXOODQÕP\HULQHWD
ú
ÕUNHQLoLQGHNL
WDKOL\HKRUWXPXQD]DUDUYHUHELOLUVLQL]
1DNOL\HFÕYDWDODUÕQÕYHVRPXQDQDKWDUÕQÕFLKD]ÕLOHULGHWD
ú
ÕPDQÕ]JHUHNHELOHFH÷LQGHQ
VDNOD\ÕQÕ]YHE|\OHELUGXUXPGDQDNOL\HFÕYDWDODUÕQÕL
ú
OHPOHULWHUVLQHX\JXOD\DUDNJHUL
WDNÕQÕ]
Important: If you have a washing machine with the drain hose inside the appliance (see “CONNECT
THE DRAIN HOSE”, picture 10 / II), pull out the drain hose BEFORE removing the
transport bolts, otherwise you risk to damage the drain hose inside the machine while
moving the appliance to its final position.
Keep the transport bolts and the wrench for further transporting of the appliance and in
this case refit the transport bolts in reverse order.
$<$./$5,1$<$5/$10$6,
ADJUSTMENT OF THE FEET
&LKD]VD÷ODPYHG]ELU]HPL ]HUL HPR WHHGLOPHOLGLUH÷HUJHUHNLUVHELUGHVWHN]HPL 
NXOOD Õ Õ](÷HUFLKD]DKúDSYH\DR\ DUELU]HPL ]HUL HPR WHHGLOHFHNVHDOWÕ D
 [  FPHEDWODUÕ GDYHH D]FPNDOÕ OÕ÷Õ GDELUNR WUSODN\HUOHúWLUHUHNYHEX X]HPL H
VDELWOH\HUHND÷ÕUOÕ÷ÕGD÷ÕWÕ Õ](÷HU]HPL G]GH÷LOVHG]OHPHD\D÷Õ ÕLVWHGL÷L L]JLEL
D\DUOD\Õ Õ]D\DNODUÕ DOWÕ DDKúDSSDUoDVÕYVNR\PD\Õ Õ]
The appliance must be installed on a solid and level floor surface (if necessary use a spirit
level). If the appliance is to be installed on a wooden or floating floor, distribute the weight
by placing it on a 60 x 60 cm sheet of plywood at least 3 cm in thickness and secure it to the
floor. If the floor is uneven, adjust the 4 levelling feet as required; do not insert pieces of
wood etc. under the feet.
&LKD]ODELUOLNWHYHULOHQVRPXQDQDKWDUÕQÕ&NXOODQDUDNHPQL\HWVRPXQXQXVDDW\|QQGH
JHY
ú
HWLQL]EN]RN\|Q
Slacken the locknut clockwise (see arrow) using the wrench Csupplied.
0DNLQH\LKDILIoHNDOGÕUÕQÕ]YHD\DNODUÕQÕG|QGUPHNVXUHWL\OH\NVHNOL÷LQLD\DUOD\ÕQÕ]
Lift slightly the machine and adjust the height of the foot revolving it.
5
6
10600834.fm Page 4 Thursday, January 11, 2007 6:07 PM
Black process 45.0° 130.0 LPI

5
g HPOLHPQL\HWVRPXQXQXVDDWLQWHUVL\|QQGHFLKD]NDVDVÕQDGR÷UXG|QGUHUHN
VÕNÕOD\ÕQÕ]
Important: tighten the locknut by turning it anti-clockwise towards the appliance casing.
687(0ø1ø*ø5ø
ù
[phone]%$ö/$<,1,=
CONNECT THE WATER SUPPLY INLET HOSE
(÷HUVXJLUL
ú
KRUWXPXKHQ]PRQWHHGLOPHPL
ú
LVHFLKD]DYLGDODQDUDNWDNÕOPDOÕGÕU
If the water inlet hose is not already installed, it must be screwed to the appliance.
*LUL
ú
KRUWXPXQXVRPXQXVÕNÕODPDNVXUHWL\OHPXVOX÷XQ]HULQHG|QGUHUHNRWXUWXQX]
'LNNDW
 KRUWXPGDELUNÕUÕOPDROPDVÕQ
 &LKD]ELUWD]\LNVL]VXÕVÕWÕFÕVÕQÕQNDUÕ
ú
WÕUPDPXVOX÷XQDED÷OD PDPDOÕGÕU
 6XPXVOX÷XQXWDPDPHQDoDUDNED÷ODQWÕODUÕQVXJHoLUPH]OL÷LQLNRQWUROHGLQL]
 (÷HUKRUWXPoRNNÕVDLVHEXQXEDVÕQFDGD\DQÕNOÕX\JXQX]XQOXNWDELUKRUWXPLOH
GH÷L
ú
WLULQL]N3DPLQ(1RQD\OÕWLS
*LUL
ú
KRUWXPXQXG]HQOLDUDOÕNODUODNÕUÕOPDYH\DoDWODNROXSROPDGÕ÷ÕQÕDQODPDN
LoLQNRQWUROHGLQL]H÷HUJHUHNLUVHGH÷L
ú
WLULQL]

d
DPD
ú
ÕUPDNLQHVLELUJHULG|Q
ú
YDOIÕROPDGDQPRQWHHGLOHELOLU
6X'XUGXUPD.HVPHKRUWXPOXPRGHOOHULoL 
(÷HUHVQHNKRUWXPoRNNÕVDLVHPHWUHOLNELU6X.HVPHKRUWXPX6DWÕ
ú
6RQUDVÕ6HUYLVWHQ
YH\DVDWÕFÕQÕ]GDQWHPLQHGLOHELOLULOHGH÷L
ú
WLULQL] XGH÷L
ú
WLUPHL
ú
OHPLVDGHFHH÷LWLPOLELU
HOHNWULNWHNQLV\HQLWDUDIÕQGDQ\DSÕOPDOÕGÕU
&LKD]ÕQPRGHOLQHED÷OÕRODUDNJLUL
ú
KRUWXPXYHPXVOXNED÷ODQWÕQRNWDVÕQGDNLSODVWLN
NDSDPDHOHNWULNOLSDUoDODULoHUPHNWHGLU+RUWXPXDVODNHVPH\L L]YHSODVWLNDNVDPÕVX\D
GDOGÕUPD\Õ Õ](÷HUKRUWXPKDVDUJ|UUVHFLKD]ÕQHOHNWULNND\QD÷ÕQGDQED÷ODQWÕVÕQÕ
KHPHQNHVLQL]
7
8
9
10600834.fm Page 5 Thursday, January 11, 2007 6:07 PM
Black process 45.0° 130.0 LPI

6
Screw by hand the inlet hose onto the tap tightening the nut.
Attention:
• no kinks in the hose!
• The appliance must not be connected to the mixing tap of an un-pressurized
water heater.
• Check water-tightness of connections by turning the tap completely on.
• If the hose is too short, replace it with a suitable length of pressure resistant hose
(1000 kPa min, EN 50084 approved type).
• Check the inlet hose regularly for brittleness and cracks and replace if necessary.
• The washing machine can be connected without a non-return valve.
For models with Water Stop hose:
If the flexible hose is too short, replace it with a 3 m Water Stop hose (available from After-
Sales Service or from your dealer). This replacement is only to be carried out by a trained
electrician.
Dependingon the model, theinlethoseand the plastic enclosure at the tap connectioncontain
electrical components. Do not cut the hose and do not immerse the plastic enclosure in
water. Isolate the appliance from the mains immediately if the hose is damaged.
7$+/ø<([phone]7$.,1,=
CONNECT THE DRAIN HOSE
I. (÷HUWDKOL\HKRUWXPXDúD÷ÕGDNLPRGHOOHUGHJ|VWHULOGL÷LJLELWDNÕOÕUVD
+RUWXPXRNLOHL
ú
DUHWOLNÕVNDoODUGDQoÕNDUWÕQÕ]
In case the drain hose is installed as shown on the models below:
Unclip it from the holders marked with arrows.
10
10600834.fm Page 6 Thursday, January 11, 2007 6:07 PM
Black process 45.0° 130.0 LPI

7
II. (÷HUWDKOL\HKRUWXPXoDPDúÕUPDNL HVL L LoNÕVPÕ DPR WHHGLOPLúVH
+RUWXPXNÕVNDFÕQGDQWDPDPHQoHNLSoÕNDUWÕQYHDoÕNNÕVPÕNDSDNODDNDSDWÕQÕ]
7$+/ø<([phone]d,.$570$'$19(%$ö/$17,6,1,<$30$'$1g1&(
d$0$ù,50$.ø1(6ø1ød$/,ù7,50$<,1,=
In case the drain hose is installed inside the washing machine:
Pull the hose completely out of the holder and close the opening with cap a.
DO NOT START THE WASHING MACHINE BEFORE HAVING PULLED OUT AND
CONNECTED THE DRAIN HOSE!
III. (÷HUWDKOL\HKRUWXPXoDPDúÕUPDNL HVL L VWNÕVPÕ DPR WHHGLOPLúLVH
+RUWXPXKHULNLNÕVNDFÕQGDQGDoÕNDUWÕQÕ]EN]RNL
ú
DUHWOHUL
In case the drain hose is installed in the upper part of the washing machine:
Unclip it from both holders (see arrows)
7DKOL\HKRUWXPXQXVLIRQDWDNÕQÕ]YH\DRQXFLKD]ODELUOLNWHYHULOHQ³8´H÷LPOLSDUoD\Õ
NXOODQDUDNELUODYDERQXQNHQDUÕQDDVÕQÕ]
(÷HUKDOLKD]ÕUGDWDNÕOÕGH÷LOVH³8´SDUoDVÕQÕ(WDKOL\HKRUWXPX X XFX DWDNÕ Õ]
g HPOL³8´SDUoDVÕQÕWDKOL\HKRUWXPXQXQED
ú
NDELUNRQXPXQDWDNPD\ÕQÕ]DNVLKDOGH
PDNLQHQLQD\QÕDQGDGROXPYHER
ú
DOWPD\DSPDULVNLV|]NRQXVXRODELOLU³VLIRQHWNLVL´
Connect the drain hose to the siphon or hook it over the edge of a sink by means of the “U” bend.
Fit the “U” bend E, if not already installed, at the very end of the drain hose.
Important: Do not fix the “U” bend to another position of the drain hose, otherwise there
might be the risk of simultaneous filling and draining of the machine (“siphoning effect”).
12
a
11

10600834.fm Page 7 Thursday, January 11, 2007 6:07 PM
Black process 45.0° 130.0 LPI

1RWODU
•7DKOL\HKRUWXPXQGDKLoELUGROD
ú
PDROPDGÕ÷ÕQGDQHPLQROXQX]
•+RUWXPXD
ú
D÷Õ\DG
ú
PH\HFHN
ú
HNLOGHHPQL\HWHDOÕQÕ]
•8IDNHO\ÕNDPDODYDERODUÕX\JXQGH÷LOGLU
•LUX]DWPD\DSPDNLoLQD\QÕWLSWHQELUKRUWXPNXOODQÕQÕ]YHED÷ODQWÕ\HUOHULQLNHOHSoHOHUOH
HPQL\HWHDOÕQÕ]
•0DNV7RSODPWDKOL\HKRUWXPXX]XQOX÷XPEXGXUXPGDPDNVLPXPWDNPD
\NVHNOL÷LD
ú
D÷ÕGDNLUHVPHEDNÕQÕ]FP¶GLU
Notes:
•Make sure there are no kinks in the drain hose
•Secure the hose so that it cannot fall down
•Small hand basins are not suitable
•To make an extension use a hose of the same type and secure the connections with
clips.
•Max. Overall drain hose length: 2,50 m (in this case, the maximum height for fixation -
see picture below - is 90 cm).
(/(.75ø.%$ö/$17,6,
ELECTRICAL CONNECTION
7RSUDNED÷ODQWÕVÕQDVDKLSELUSUL]NXOODQÕQÕ]
8]DWPDNDEORODUÕYH\DSUL]oR÷DOWÕFÕODUNXOODQPD\ÕQÕ]
(OHNWULNJoNDEORVXVDGHFHOLVDQVOÕELUHOHNWULNWHNQLV\HQLWDUDIÕQGDQGH÷L
ú
WLULOPHOLGLU
(OHNWULNVHOED÷ODQWÕODU\HUHOW]NOHUHX\JXQELU
ú
HNLOGH\DSÕOPDOÕGÕU
Use a socket with an earth connection.
Do not use extension leads or multi sockets.
The electrical power cable must be replaced exclusively by a licensed electrician.
Electrical connections must be made in accordance with local regulations.
0L  FP
0DNV FP
5019 106 00834
10600834.fm Page 8 Thursday, January 11, 2007 6:07 PM
Black process 45.0° 130.0 LPI