Whirlpool FL243 User manual

Programme Type of textiles / Degree of soiling Max.
Load
kg
Detergent and Additives Special functions that
can be selected Tempe- rature
Selector
°C
Programme
selector
knob
Pre-
wash Wash Fabric Softener Chlo- rine
bleach
Half
Load No spin Rinse Hold
1Cotton
with pre-wash
Heavily soiled, long wearing and temperature stable textiles in cotton and
linen (bed linen, table linen, underwear, shirts etc).
The max load for heavily soiled laundry is 3,5 kg. 5,0 ❉Yes ❉❉❉❉❉
Min. to 95 1
2 Cotton Averagely soiled, long wearing and temperature stable textiles in cotton and
linen (bed linen, table linen, underwear, shirts etc).
The max load for heavily soiled laundry is 3,5 kg. 5,0 — Yes ❉❉❉❉❉
Min. to 95 2
3 Synthetic Averagely soiled textils in cotton, linen, polyester (Diolen, Trevira);
polyamide (Perlon, Nylon), other synthetics or similar blends. 2,0 — Yes ❉—❉❉❉
Min. to 60 3
4Cotton short
Synthetic short Lightly soiled textils in cotton, linen, polyester (Diolen, Trevira); polyamide
(Perlon, Nylon), other synthetics or similar blends. 2,5 2,0 —Yes ❉—❉❉❉
Min. to 40 4
5 Delicate Curtains and delicate synthetic textiles (dresses, skirts and blouses etc). 1,5 — Yes ❉——❉❉ Min. to 40 5
6 Wool Only machine washable woollens with pure new wool label. 1,0 — Yes ❉——❉No Min. to 40 6
ARinse and
Long spin With this programme you can add fabric softener or starch.
The programme ends with a long spin cycle. 5,0 — — ❉—❉❉❉Min. A
B Long spin This programme provides a long spin cycle, the same as the spin
cycle in the Cotton programme. 5,0 — — — — — — — — B
CRinse and
short Spin With this programme you can add fabric softener or starch.
The programme ends with a short spin cycle. 1,5 — — ❉——❉❉Min. C
D Short Spin This programme provides a short spin cycle, the same as the spin
cycle in the Wool programme. 1,5 — — — — — — — — D
E Draining Drain only, without spin, e.g to unload the laundry earlier. — — — — — — — — — E
Cotton
Synthetic
Delicate/Wool
On/Off
GB PROGRAMME TABLE
Half load
No spin
Rinse hold
FL 243

CONSUMPTION DATA
SELECTING THE PROGRAMME
1. Turn the programme selector knob clockwise to the desired programme.
2. Set the temperature knob to the desired temperature.
PRESS THE DESIRED SPECIAL OPTION BUTTON
“Lightly soiled / Half load” button
• Reduces water consumption, above all during the rinse.
• Especially suitable for lightly soiled or small loads (reduce the detergent quantity).
“No spin” button
Press this button to exclude the spin function from the programme.
“Rinse hold / Spin delay” button
• The laundry remains in the last rinse water without being spun, to avoid heavy
creasing.
• Especially suitable for the “Synthetic” or “Delicate” programmes, if the laundry is not to
be unloaded immediately after the end of the programme.
Stopping “Rinse hold”
• Press the “Rinse hold” button again; the load will be spun according to the selected
programme.
PROGRAMME START
1. Plug in the appliance.
2. Turn on the water supply tap.
3. Press the “On/Off” button.
DOOR LOCK
The door locks automatically after the programme start until the end of the programme.
PROGRAMME END
• The programme sequence indicator is at “Stop”.
1. Press the “On/Off” button.
2. Cancel the special options by pressing the appropriate buttons.
3. Turn the water supply tap(s) off.
4. Wait for the door to unlock (about 2 minutes).
5. Open the door and unload the machine.
Note: Do not fully close the door but leave it ajar to allow the drum to dry out.
PROGRAMME RESELECTION
1. Press the “On/Off” button.
2. Select the new programme, temperature and relative options.
3. Press the “On/Off” button.
Programme Water Energy Programme
duration
(l) (kWh) (min)
Cotton 95° C
with pre-wash 180 2,00 120
Cotton 95° C 2 70 1,80 110
Cotton 60° C 2 70 1,20 110
Synthetic 60° C 3 60 0,90 85
Cotton short 40° C
Synthetic 40° C 465 60 0,70 0,60 75 75
Delicate 40° C 5 80 0,60 70
Wool 40° C 6 80 0,60 65
GB
5019 100 00081