Whirlpool W10275729D User manual

®
Certified to Sanitize
Certifié pour aseptiser
Designed to use only HE High Efficiency Detergent
Conçue pour l'utilisation d'un détergent HE haute efficacité
seulement

FRONT-LOADING
AUTOMATIC WASHER
Use & Care Guide
For questions about features, operation/performance,
parts, accessories, or service call: 1-800-253-1301
In Canada, call: 1-800-807-6777
or visit our website at
www.whirlpool.com or www.whirlpool.ca
LAVEUSE
AUTOMATIQUE À
CHARGEMENT FRONTAL
Guide d'utilisation et d'entretien
Au Canada, pour assistance, installation ou service, composez le :
1-800-807-6777
ou visitez notre site internet à
www.whirlpool.ca
Table of Contents/Table des matières .................. 2
W10275729D

2
TABLE OF CONTENTS
WASHER SAFETY ....................................................................................... 3
INSTALLATION REQUIREMENTS ............................................................. 4
Tools and Parts......................................................................................... 4
Options...................................................................................................... 4
Location Requirements............................................................................. 4
Drain System............................................................................................. 6
Electrical Requirements............................................................................ 7
INSTALLATION INSTRUCTIONS ............................................................... 8
Remove Transport System....................................................................... 8
Connect the Inlet Hoses ........................................................................... 8
Connect the Drain Hose ........................................................................... 9
Secure the Drain Hose............................................................................ 10
Level the Washer ....................................................................................10
Complete Installation .............................................................................. 10
FEATURES AND BENEFITS .....................................................................11
WASHER USE ............................................................................................ 12
Starting Your Washer..............................................................................12
Using the Proper Detergent....................................................................12
Using the Dispenser................................................................................13
Pausing or Restarting ............................................................................. 14
Changing Cycles and Options................................................................14
Status Lights ...........................................................................................14
Cycles .....................................................................................................14
Normal Sounds ....................................................................................... 16
Options.................................................................................................... 16
Laundry Guide ........................................................................................17
LAUNDRY TIPS.......................................................................................... 18
Loading ................................................................................................... 18
Stain Removal Guide .............................................................................. 19
WASHER CARE .........................................................................................20
Cleaning Your Washer............................................................................20
Water Inlet Hoses....................................................................................21
Vacation, Storage, and Moving Care .....................................................21
TROUBLESHOOTING ...............................................................................22
ASSISTANCE OR SERVICE......................................................................26
WARRANTY ...............................................................................................27
TABLE DES MATIÈRES
SÉCURITÉ DE LA LAVEUSE .................................................................... 28
EXIGENCES D'INSTALLATION................................................................ 29
Outillage et pièces .................................................................................. 29
Options ................................................................................................... 29
Exigences d'emplacement ..................................................................... 29
Système de vidange ............................................................................... 31
Spécifications électriques....................................................................... 32
INSTRUCTIONS D'INSTALLATION ......................................................... 33
Élimination des accessoires de transport .............................................. 33
Raccordement des tuyaux d'alimentation ............................................. 33
Raccordement du tuyau de vidange...................................................... 34
Immobilisation du tuyau de vidange ...................................................... 35
Réglage de l'aplomb de la laveuse ........................................................ 35
Achever l'installation............................................................................... 35
CARACTÉRISTIQUES ET AVANTAGES.................................................. 36
UTILISATION DE LA LAVEUSE................................................................ 37
Mise en marche de la laveuse................................................................ 37
Utilisation du détergent approprié.......................................................... 37
Utilisation du distributeur........................................................................ 38
Pause ou remise en marche................................................................... 39
Modification des programmes et options .............................................. 39
Témoins lumineux................................................................................... 39
Programmes ........................................................................................... 40
Sons normaux......................................................................................... 42
Options et modificateurs ........................................................................ 42
Guide de lessivage ................................................................................. 44
CONSEILS DE LESSIVAGE ...................................................................... 45
Chargement ............................................................................................ 45
Guide pour l'élimination des taches....................................................... 46
ENTRETIEN DE LA LAVEUSE.................................................................. 47
Nettoyage de la laveuse ......................................................................... 47
Tuyaux d'arrivée d'eau ........................................................................... 48
Précautions à prendre avant les vacances, 
un entreposage ou un déménagement.................................................. 48
DÉPANNAGE ............................................................................................. 49
ASSISTANCE OU SERVICE...................................................................... 54
GARANTIE.................................................................................................. 55

3
WASHER SAFETY
You
You can be killed or seriously injured if you don't immediately
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING

4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■Pliers (that open to 19/16 [39.5 mm])
■Flashlight (optional)
Tools needed for connecting the drain hose
■Locking pliers (that open to 19/16" [39.5 mm])
Tools needed for installation
■Open end wrenches 14 mm and 13 mm
■Level
■Wood block
■Ruler or measuring tape
Parts supplied
AB
D
G
C
EF
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Drain hose
E. Transport bolt hole plug (4)
F. Beaded strap
G. Hose clamp
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free number
on the cover or in the “Assistance or Service” section.
If You Have You Will Need to Buy
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
Overhead sewer Standard 20 gal. (76 L), 30" (762 mm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain Siphon break, Part Number 285834;
additional drain hose
Part Number 8318155; and connector
kit, Part Number 2858835
Drain hose too
short 4 ft (1.2 m) drain hose extension kit, Part Number 2858863
Water faucets
beyond reach of fill
hoses
2 longer water fill hoses: 
6 ft (1.8 m) Part Number 76314
10 ft (3.0 m) Part Number 350008
Options
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (254 mm) or a
15.5" (394 mm) pedestal. The pedestal will add to the total height
of the washer.
Optional pedestal
Pedestal 
Height Approximate Height with
Washer
Color Model
Number
10"
(254 mm) 46" (1168 mm) White WHP1000SQ
10"
(254 mm) 46" (1168 mm) Cranberry RedXHP1000WR
15.5"
(394 mm) 51.5" (1308 mm) White WHP1500SQ
15.5"
(394 mm) 51.5" (1308 mm) Cranberry RedXHP1550WR
15.5"
(394 mm) 51.5" (1308 mm) Lunar Silver XHP1550WL
Stack Kit
Are you planning to stack your washer and dryer? To do so, you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your washer or
refer to the “Assistance or Service” section of this manual. Ask for
Part Number 8572546.
Location Requirements
Selecting the proper location for your washer improves
performance and minimizes noise and possible washer “walk.”
Your washer can be installed under a custom counter, or in a
basement, laundry room, closet, or recessed area. See “Drain
System.”
Companion appliance location requirements should also be
considered. Proper installation is your responsibility.
You will need
■A water heater set to deliver 120°F (49°C) water to the washer.
■A grounded electrical outlet located within 6 ft (1.8 m) of
where the power cord is attached to the back of the washer.
See “Electrical Requirements.”

5
■Hot and cold water faucets located within 4 ft (1.2 m) of 
the hot and cold water fill valves, and water pressure of 
20-100 psi (137.9-689.6 kPa).
■A level floor with a maximum slope of 1" (25 mm) under entire
washer. Installing the washer on soft floor surfaces, such as
carpets or surfaces with foam backing, is not recommended.
■A sturdy and solid floor to support the washer with a total
weight (water and load) of 400 lbs (180 kg).
Do not operate your washer in temperatures below 32°F (0°C).
Some water can remain in the washer and can cause damage in
low temperatures. See “Washer Care” in the Washer User
Instructions for information on winterizing.
Installation clearances
■The location must be large enough to allow the washer door 
to be fully opened.
■Additional spacing should be considered for ease of
installation and servicing. The door opens more than 90°, 
and it is not reversible.
■Additional clearances might be required for wall, door, 
and floor moldings.
■Additional spacing of 1" (25 mm) on all sides of the washer 
is recommended to reduce noise transfer.
■Companion appliance spacing should also be considered.
Washer Dimensions
5 0
1
/ 4 "
(1276 mm)
27 "
(686 mm)
36 "
(914 mm)
30
1
/ 2 "
(775 mm)
Recommended installation spacing for custom undercounter
installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
27 "
(686 mm)
1 "
(25 mm)
1 "
(25 mm)
2 " (50 mm)
36 " min.
(914 mm)
Recommended installation spacing for recessed or closet
installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
3 "
(76 mm)
48 "
(1220 mm)
3 "
(76 mm)
48 in.
2
(310 cm
2
)
24 in.
2
(155 cm
2
)
1 "
(25 mm)
4 "
(102 mm)
30
1
/ 2 "
(775 mm)
AB
A. Side view - closet or confined area
B. Closet door with vents
Recessed or closet installation - Washer on pedestal
38 " min.
(965 mm)
1 "
(25 mm)
27 "
(686 mm)
AB
1 "
(25 mm)
1 "
(25 mm)
4 "
(102 mm)
301/2 "
(775 mm)
A. Recessed area
B. Side view - closet or confined area

6
Recommended installation spacing for recessed or closet
installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
3"
(76 mm)
3"
(76 mm)
48 in.
2
*
(310 cm
2
)
24 in.
2
*
(155 cm
2
)
27 "
(686 mm)
1 "***
(25 mm)
1 " (25 mm)
12 " (305 mm)
1 "***
(25 mm)
5
1
/ 4 "**
(133 mm)
72 "
(1829 mm)
*Min. top and bottom air openings for closet door.
**External exhaust elbow requires additional space.
***Wall, door, and floor molding may require additional spacing.
Recommended installation spacing for cabinet installation
The dimensions shown are for the recommended spacing.
For cabinet installation, with a door, the minimum ventilation
openings in the top are required.
1 "
(25 mm)
(178 mm)
7 "
(178 mm)
7 "
(229 mm)
9 "
(102 mm)
4 "(25 mm)
1 "
(686 mm)
27 "
(800 mm)
31
1/2
"
Drain System
The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need. See
“Tools and Parts.”
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2"
(50 mm). The minimum carry-away capacity can be no less than
17 gal. (64 L) per minute.
The top of the standpipe must be at least 30" (762 mm) high and
no higher than 96" (2.4 m) from the bottom of the washer.
30 " min.
(762 mm)
A B
Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top
of the laundry tub must be at least 30" (762 mm) above the floor.
Floor drain system (view D)
The floor drain system requires a siphon break that may be
purchased separately. See “Tools and Parts.”
The siphon break must be a minimum of 28" (710 mm) from the
bottom of the washer. Additional hoses might be needed.
30 " min.
(762 mm)
28 " min.
(710 mm)
C D

7
Electrical Requirements
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
re, or electrical shock.
WARNING
■A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical
supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.
■This washer is equipped with a power supply cord having a
3 prong grounding plug.
■To minimize possible shock hazard, the cord must be plugged
into a mating, 3 prong, grounding-type outlet, grounded in
accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.
■If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that the
ground path is adequate.
■Do not ground to a gas pipe.
■Check with a qualified electrician if you are not sure the
washer is properly grounded.
■Do not have a fuse in the neutral or ground circuit.

8
INSTALLATION INSTRUCTIONS
Remove Transport System
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
IMPORTANT: Position the washer so that the rear of the washer is
within approximately 3 ft (900 mm) of its final location.
There are 4 transport bolts in the rear panel of the washer that
support the suspension system during transportation. These bolts
also retain the power cord inside the washer until the bolts are
removed.
1. On the back of the washer, loosen the 4 transport bolts using
a 13 mm wrench.
2. Once the bolt is loose, move it to the center of the hole and
completely pull out the bolt, including the plastic spacer
covering the bolt.
3. Once all 4 bolts are removed, discard the bolts and spacers.
Then pull the power cord through the opening of the rear
panel and close the hole with the attached cap.
4. Cover the bolt holes with the 4 transport bolt hole plugs.
NOTE: If the washer is to be transported at a later date, call your
local service center. To avoid suspension and structural damage,
your machine must be properly set up for relocation by a certified
technician.
Connect the Inlet Hoses
Insert new flat washers (supplied) into each end of the inlet hoses.
Firmly seat the washers in the couplings.
A B
A. Coupling
B. Washer
Connect the inlet hoses to the water faucets
Make sure washer drum is empty and flat washers have been
placed into hose couplings. Both hoses must be used for the
washer to work properly.
1. Attach a hose to the hot water faucet. Screw on coupling by
hand until it is seated on the washer.
2. Attach a hose to the cold water faucet. Screw on coupling by
hand until it is seated on the washer.
3. Using pliers, tighten the couplings with an additional 
two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling or water
faucet can result. Both faucets must be turned on for the washer
to work properly.
Clear the water lines
■Run water through both faucets and inlet hoses, into a laundry
tub, drainpipe or bucket, to get rid of particles in the water
lines that might clog the inlet valve screens.
■Check the temperature of the water to make sure that the hot
water hose is connected to the hot water faucet and that the
cold water hose is connected to the cold water faucet.

9
Connect the inlet hoses to the washer
IMPORTANT: Make sure that the flat washers have been placed
into the hose couplings.
C H
H. Hot water inlet
C. Cold water inlet
1. Attach the hot water hose to the washer’s hot (H) water inlet
valve. Screw on coupling by hand until it is seated on the
washer.
2. Attach the cold water hose to the washer’s cold (C) water
faucet. Screw on coupling by hand until it is seated on the
washer.
3. Using pliers, tighten the couplings with an additional 
two-thirds turn.
NOTE: Do not overtighten or use tape or sealants on the
valve. Damage to the valves can result.
4. Turn on the water faucets completely and check for leaks.
NOTE: Replace inlet hoses after 5 years of use to reduce the
risk of hose failure. Record hose installation or replacement
dates on the hoses for future reference.
Periodically inspect and replace hoses if bulges, kinks, cuts,
wear, or leaks are found.
Connect the Drain Hose
Remove drain hose from washer drum
1. Use locking pliers, squeeze hose clamp tabs together and insert
over the end of drain hose.
2. Slide drain hose onto washer connection.
3. Once drain hose is in place, release pliers.
4. Washer drain system can be installed using a floor drain, wall
standpipe, floor standpipe, or laundry tub.
Laundry tub drain or standpipe drain
A B
Connect the drain hose form to the corrugated drain hose.
A. Snap either end of the drain hose form to the drain hose at the point
where the corrugation begins.
B. Bend drain hose over drain hose form and snap into place.
To keep drain water from going back into the washer:
■Use the drain hose form, and do not force excess drain hose
into standpipe. Hose should be secure, but loose enough to
provide a gap for air.
■Do not lay excess hose on the bottom of the laundry tub.
Floor drain
You may need additional parts. See Floor drain under “Tools 
and Parts.”

10
Secure the Drain Hose
Drain hose must be secured to stop the hose from moving when
water is pumped out. If the drain hose moves, water may end up
on the floor.
1. Drape the power cord over the washer top.
2. Move the washer to its final location.
3. Place the drain hose in the laundry tub or standpipe as shown.
See illustrations A and B.
A B C
NOTES:
■Do not force excess drain hose back into the rear of the
washer.
■To avoid siphoning, do not seal or put more than 4½"
(114 mm) of the drain hose into drainpipe or standpipe.
4. If the washer faucets and the drain standpipe are recessed,
put the hooked end of the drain hose in the standpipe as
shown. See illustration C.
Level the Washer
Proper foot to floor contact and leveling your washer avoids
excessive noise and vibration.
NOTE: Installing washer on soft floor surfaces, such as carpets or
surfaces with foam backing, is not recommended.
1. Slide the washer to its final location.
2. Check that all four feet are in firm contact with the floor.
3. Check the levelness of the washer by placing a level on the
top edge of the washer, first side to side then front to back.
If the washer is against a wall, move the washer out slightly
before tipping back. If the washer is not level, first prop the
front with a wooden block and adjust the front feet height
moving the hexagonal plastic part as necessary. Repeat to
adjust back feet.
4. Make sure all four feet are in firm contact with the floor. Then
check that the washer is perfectly level (use a level). Repeat
steps 1-3 until washer is level.
5. After the washer is level, and all four feet are in firm contact
with the floor, use a 9/16" (14 mm) open-end wrench to turn the
locknuts on the feet, tightly against the washer cabinet.
IMPORTANT: All four locknuts on the feet must be tightened.
If the locknuts are not tight against the washer cabinet, the
washer may vibrate.
6. The washer should not move front to back, side to side, or
diagonally when pushed on its top edges.
7. Confirm the levelness of the washer.
Complete Installation
1. Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See “Electrical Requirements.”
2. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
3. Check that you have all of your tools.
4. Dispose of/recycle all packaging materials.
5. Check that both water faucets are on.
6. Check for leaks around faucets and inlet hoses.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
re, or electrical shock.
WARNING
7. Plug into a grounded 3 prong outlet.
8. Read “Washer Use.”
9. To test and to clean your machine, make sure that there are no
clothes in the washer and add one AFFRESH®washer tablet
to the washer drum. Press POWER, the CLEAN WASHER with
AFFRESH™ cycle and then press START/PAUSE. This cycle
will take approximately 50 minutes to complete. Allow the
washer to complete the entire cycle without interruption.

11
FEATURES AND BENEFITS
Your new front-loading high efficiency washer, was designed to
conserve resources and lower your water and energy bills. The
washer is designed to determine and then provide the amount of
water needed for the best performance. The time of operation
may be greater for this new system than for a conventional
washer.
Electronic Controls
Flexible electronic controls are easy to use whether you are a
beginner or an expert.
Auto Water Level
Adjusting to the size of the load, this feature allows the washer to
use the minimal amount of water needed to clean and rinse the
clothes. With a low water level, you can obtain the same results.
Because only the required amount of water is used, the washer
saves energy, too. You can obtain the same washing results for
small and large load sizes.
Larger Load Size
Since there is no agitator, you can wash larger, bulkier items such
as an average size sleeping bag. You are also able to wash more
clothes at one time, which means fewer loads. You can wash a
pillow or a large stuffed teddy bear.
Suspension System
To reduce washer “walk” and “off-balance” conditions, your new
washer combines:
■2 Springs to isolate vibration
■3 Shock absorbers at the washer base to minimize movement
Stainless Steel Drum
The stainless steel drum eliminates corrosion and enables higher
spin speeds for more water extraction, reducing drying time.
Adaptive Variable Speed Motor
The motor adapts to the load size and to the cycle selected to
give the optimum cleaning, rinsing, and spinning conditions. The
motor can handle slow speeds needed for delicate items and is
powerful enough to drive an average clothes load up to high-
speed spin.
Spin Speeds
This washer automatically selects the spin speed based on the
cycle selected. For some cycles, the default spin speed can be
changed if desired. This washer offers up to three different spin
speed choices.
Heating Element
This washer has a heating element that automatically heats the
water to the best temperature on Whitest Whites, Eco Whitest
Whitest, Eco Heavy Duty, Heavy Duty, and Bulky cycles. This
enables stepped cleaning, a process in which warm water is
brought in and mixed with detergent first, then the water is
heated.
Add a Garment
This option is available in all wash cycles except Rinse/Drain &
Spin, and Clean Washer with AFFRESH™ cycle. When this option
is available at the beginning of the cycle, the Add a Garment
status light will illuminate for the first 7 minutes. This washer
allows a 7-minute period in which other garments may be added
to a load.
Dynamic Balance
A precision balancing system allows the washer to reach high-
speed spins. The washer spins faster so that clothes coming out
of the washer will have less moisture than with traditional top load
machines. In addition, if the Dynamic Balance system detects off-
balance loads during spinning, it redistributes the clothes so that
they are evenly balanced.
Smart Dispensers
The three compartments in the dispenser allow loading of all
laundry products before the washer is started. The products will
be dispensed into the wash at the optimal time for high-
performance cleaning. The bleach release system is included in
the detergent advantage system. The detergent is added at the
beginning of the cycle, and the bleach is added after the enzymes
have had a chance to do their cleaning. The fabric softener is
dispensed in the rinse cycle or in the Extra Rinse, if selected. The
Detergent Advantage System Dispenser tray is easily removed for
cleaning.
Use only HE High Efficiency detergent.

12
WASHER USE
Starting Your Washer
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to using your washer. Please refer to
specific sections of this manual for more detailed information.
Do not store laundry products on the top surface of this washer.
Vibration is normal during operation.
Using the Proper Detergent
Use only High Efficiency detergents. The package for this type of
detergent will be marked “HE” or “High Efficiency.” This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold or
mildew. HE detergents are made to produce the right amount of
suds for the best performance. Follow the manufacturer’s
instructions to determine the amount of detergent to use
.
Use only HE High Efficiency detergent.
First Wash Cycle Without Laundry
Before washing clothes for the first time, if not completed during
the final installation step, choose the NORMAL cycle and run it
without clothes. Use only HE High Efficiency detergent. Use ½ the
manufacturer’s recommended amount for a medium-size load.
This initial cycle serves to ensure the interior is clean before
washing clothes.
For All Wash Cycles
1. To load washer
Open the washer door by pulling on the handle. Sort laundry
according to color and type of fabric. Place a load of sorted
clothes in the washer. Do not overload washer. Overloading
can cause poor cleaning.
■Always empty pockets. Small items can be caught within
the washer resulting in noise or plugging the pump.
■The washer can be fully loaded, but not tightly packed.
Washer door should close easily.
■Mix large and small items. Avoid washing a single item.
Load evenly.
■Wash small items such as infant socks in mesh garment
bags. It is recommended that more than one garment bag
be used and that each garment bag be filled with equal
amounts of material.
■When unloading garments, occasionally check under the
rubber rim at the front of the tub for small items.
2. Close the washer door by pushing it firmly until the lock clicks.
After a lock check at the beginning of the cycle, the washer
door will remain locked during the wash cycle.
NOTE: After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin. The
door can be opened only if START/PAUSE is pressed while
the Add a Garment light is illuminated or if the cycle has been
canceled. See “To cancel a cycle” in the “Changing Cycles
and Options” section.
3. Open the dispenser drawer and add laundry products to the
detergent, bleach, or fabric softener compartments. Close
drawer slowly to avoid spills. See “Using the Dispenser.”
4. Turn on the washer by pressing POWER. Select one of the
cycles by turning the cycle selector. The indicator light for the
selected cycle will illuminate. When selecting a Wash Cycle,
the preset Temp and Spin Speed for the selected cycle will
illuminate. These settings provide the recommended fabric
care for the selected cycle. See “Cycles.”
5. Select the desired Options. Not all Options are available with
all cycles. See “Options.”
6. If desired, press the SIGNAL button. The signal is helpful when
you are washing items that should be removed from the
washer as soon as it stops. Press SIGNAL button to select On
or Off.

13
7. To begin the wash cycle immediately
Press and hold START/PAUSE (for approximately 1 second).
■If you do not press START/PAUSE within 5 minutes of
choosing a cycle, the washer automatically shuts off.
■When the wash cycle is complete, the Done status light
illuminates, the door unlocks, and the wash load can be
removed from the washer. To power down the washer
manually after the wash cycle is complete, press POWER
once or open the door when the DONE status light goes
off.
8. To begin the wash cycle later
Press DELAY START until the desired delay time (in hours) is
displayed. Press START/PAUSE. The countdown to the wash
cycle will show in the display window.
IMPORTANT: When delaying a cycle, use only powdered
detergents in the main wash compartment since liquid
detergents may seep out of the compartment during Delay,
before the wash cycle begins.
Using the Dispenser
Your new washer has a dispenser drawer with three separate
compartments for your laundry products—one is for detergent,
one is for liquid chlorine bleach, and one is for liquid fabric
softener. Laundry products are diluted and dispensed
automatically at the proper time during the wash cycle, making it
unnecessary for you to return to the washer during the cycle to
add them.
It is normal for small amounts of water to remain in the dispensers
when the wash cycle is complete.
Do not put laundry products directly into the wash tub. Always
use the proper dispensers when adding laundry products.
Choosing the Right Detergent
Use only High Efficiency detergents. The package for this type of
detergent will be marked “HE” or “High Efficiency.”
This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold or
mildew.
HE detergents are made to produce the right amount of
suds for the best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use.
Use only HE High Efficiency detergent.
To fill dispenser compartments
1. Pull out the dispenser drawer.
2. Add the desired laundry products to the proper compartment.
3. Push in the dispenser drawer slowly and completely (to avoid
a spill).
A
B
C
D
Dispenser
A. Dispenser release lever
B. Main Wash detergent compartment
C. Liquid chlorine bleach compartment
D. Fabric softener compartment
Main Wash detergent compartment
(Letter B in Dispenser Illustration)
Add liquid or powdered HE detergent to this compartment for
your main wash cycle.
■Liquid color-safe bleach or oxi products may be added to the
Main Wash compartment along with liquid detergent.
■Powdered color-safe bleach or oxi products may be added to
the Main Wash compartment along with the powdered
detergent.
■Do not mix powdered and liquid products in the Main Wash
compartment.
■Use the measurement device which comes with the detergent.
Add no more than the manufacturer's recommended amount.
NOTE: Overfilling could cause an oversudsing condition.
Chlorine bleach compartment
(Letter C in Dispenser Illustration)
Add NO MORE THAN 2/3cup (160 mL) liquid chlorine bleach to
this compartment. The bleach will be automatically diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.
■Use only liquid chlorine bleach in this dispenser. Do not use
this dispenser to add powdered chlorine or any form of color-
safe bleach or oxi products to your load.
■Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess. Follow the manufacturer’s
directions for proper use.
■Do not fill beyond the “MAX” level.
NOTE: Overfilling could cause garment damage.
Fabric softener compartment
(Letter D in Dispenser Illustration)
Follow the manufacturer's instructions to determine the amount of
fabric softener to use. Fabric softener will be automatically
dispensed in the final rinse or in the Extra Rinse, if selected.
■Do not fill beyond the “MAX” level.

14
Pausing or Restarting
1. To pause the washer at any time, press START/PAUSE.
2. To continue the cycle, press and hold START/PAUSE (for
approximately 1 second).
Changing Cycles and Options
Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START is
pressed.
To cancel a cycle
1. Press POWER.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If the water level or the temperature is too high, the washer
will drain automatically before the door unlocks.
To change Options after the cycle has started
1. Press START/PAUSE once.
2. Press the desired OPTIONS. If the option is not available, the
machine will beep.
3. Press and hold START/PAUSE (for approximately 1 second) to
continue the cycle.
NOTE: Press OPTIONS button until TumbleFresh light glows to
add periodic tumbling after the wash cycle is finished. The light
will glow when this option is selected and will remain flashing for
up to 6 hours or until the washer is stopped by either pressing
POWER or opening the door.
To drain the washer manually
1. Press START/PAUSE.
2. Press RINSE/DRAIN & SPIN.
3. Deselect EXTRA RINSE option.
4. Press and hold START/PAUSE (for approximately 1 second) to
begin the drain.
5. When the spin is complete, the door unlocks. Items can be
removed from the washer.
Status Lights
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional item
to the wash cycle and when the controls are locked.
Adding items
You can add items to the washer after the wash cycle has started,
if the Add a Garment status light is illuminated. All cycles have this
feature except Rinse/Drain & Spin, and Clean Washer with
AFFRESH™ cycle.
To add items
1. Press START/PAUSE. The washer door unlocks, and items
can be added.
2. To continue the cycle, close the door and press and hold
START/PAUSE (for approximately 1 second).
NOTE: To add garments after the Add a Garment period is over,
the wash cycle needs to be canceled, the items added, and a new
wash cycle started.
Done
The Done light comes on after the cycle is complete. The light will
stay on until door is opened.
Locking controls
The Control Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or
option changes during a cycle. When CONTROL LOCK is lit, all
buttons are disabled except for START/PAUSE, POWER, and
SIGNAL. You can lock the controls while the washer is operating.
To lock the controls
Press and hold SIGNAL for 3 seconds.
The CONTROL LOCK status light illuminates.
To unlock the controls
Press and hold SIGNAL for 3 seconds until the CONTROL LOCK
Status light turns off.
Estimated Time Remaining
The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.
The options you select will also change the cycle times that are
shown in the Factory Default Cycle Settings table. The Estimated
Time Remaining can change up to 30 minutes under extreme
conditions.
Door Locked
When the status light illuminates, the door is locked. The door is
locked and unlocked automatically, depending on the stage of the
wash cycle.
Cycles
Wash Cycles
Choose Wash Cycles by rotating the Cycle selector knob to the
desired cycle. The indicator light for the cycle selected will
illuminate. Each cycle is designed for different types of fabric and
soil levels.
■Each cycle has a preset cycle time. TEMP and SPIN SPEED
may have preset Options. The preset settings provide the
recommended fabric care for the selected cycle.

15
■The preset settings can be changed anytime before START/
PAUSE is pressed. Not all Options (TEMP, SPIN SPEED) are
available with all Cycles. To change settings after the cycle
has started, press START/PAUSE, then select the desired
settings. Press and hold START/PAUSE (for approximately
1 second) to continue the cycle.
Preset Cycle Settings
Each cycle has a preset Cycle Time, TEMP, and SPIN SPEED.
These settings provide the recommended fabric care for the
selected cycle. See chart.
Cycle Est.
Time*
(hr:min)
Time
Shown
on
Display
(hr:min)
Temp Spin
Speed
Whitest 
Whites 1:51 2H Hot Extra High
Eco
Whitest
Whites
2:12 2H Hot Extra
High
Eco Heavy 
Duty 1:59 2H Hot Extra High
Heavy Duty 1:38 0:99 Hot Extra
High
Bulky 2:00 2H Warm Medium
Normal 0:56 0:56 Warm Extra
High
Small Load
(2-3 items) 0:28 0:28 Warm Extra High
Delicate 0:36 0:36 Cold Low
Silk 0:37 0:37 Cold Low
Rinse/
Drain &
Spin
0:26/
0:140:26/
0:14 Cold Extra High
Soak 0:30 0:30 Warm No Spin
Clean 
Washer with
AFFRESH™
0:56 0:56 N/A Extra
High
*The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.
Whitest Whites
This cycle is especially designed for cleaning loads of soiled white
fabrics with the addition of bleach. Hot washing temperatures
assure optimal chlorine bleach activity. An additional rinse
provides optimal rinse performance to avoid chlorine residues on
your laundry. This cycle combines fast-speed tumbling, longer
wash time, and extra high-speed spin to shorten drying time. It
also includes an Extra Rinse option, which is automatic with
Whitest Whites cycle.
Eco Whitest Whites
This cycle combines fast-speed tumbling while providing energy
savings on hot or warm wash temperature settings and by
lengthening the wash time by only 18 minutes. Cleaning and rinse
provides optimal rinse performance to avoid chlorine residues on
your laundry.
Eco Heavy Duty
This cycle is designed to provide energy savings by reducing hot
water usage, while providing the same wash performance as
Heavy Duty. This will lengthen the wash time by only 18 minutes.
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics and
heavily soiled garments. This cycle combines fast-speed
tumbling, longer wash time, and extra high-speed spin to shorten
drying times.
Bulky
Use this cycle to wash normally soiled blankets and comforters.
This cycle starts with a soak to thoroughly saturate your large
load. This is followed by medium wash action and medium-spin
speeds to maintain load balance.
Normal
Use this cycle to wash loads of no-iron fabrics such as sport
shirts, blouses, casual business clothes, permanent press blends,
cottons and linens, and synthetic fabrics. This cycle combines
medium-speed tumbling, extra high-speed spin, and a load
cooling process to reduce wrinkling.
Small Load
Use this cycle to wash small loads of 2-3 lightly soiled garments
that are needed in a hurry. This cycle combines fast-speed
tumbling, a shortened wash time, and extra high-speed spin to
shorten drying time. Large wash loads will result in the machine
increasing the wash time.
Delicate
Use this cycle to wash sheer fabrics, lingerie, hand washable, and
special-care garments. This cycle combines low-speed tumbling
and low-speed spin for gentle fabric care.
■Use mesh garment bags to wash undergarments such as
underwire bras, items with strings, and small items such as
socks.
Silk
Use this cycle to clean washable silk and ultra delicate garments
(check label instructions to make sure the garment is washable.)
This cycle gently tumbles and drains with the lowest spinning to
gently clean garments and minimize wrinkling. Garments will
contain a higher amount of water at the end of this cycle because
of the low spin action.
Rinse/Drain & Spin
Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and extra high-speed spin. If desired, you
can reduce the spin speed by selecting the speed you want from
the SPIN SPEED option.
Rinse/Drain & Spin is useful for:
■Loads that need rinsing only.
■Adding fabric softener to a load using the fabric softener
dispenser.
Using Drain & Spin:
1. Select Rinse/Drain & Spin cycle.
2. Deselect Extra Rinse option.

16
Soak
Use the Soak cycle to help remove stains on fabrics. This cycle
provides a soak time with warm or cold water, followed by drain.
Extra water, a short tumbling phase for equal distribution of the
laundry, and a soaking time without drum movement help improve
the removal of stains. Drain without spin assures gentle treatment,
even for delicate items.
Clean Washer with AFFRESH™ cycle
Use the Clean Washer with AFFRESH™ cycle once a month to
keep the inside of your washer fresh and clean. This cycle uses a
higher water level in combination with AFFRESH®washer cleaner
tablet or chlorine bleach to thoroughly clean the inside of your
washing machine. See “Cleaning Your Washer.”
IMPORTANT: Do not place garments or other items in the washer
during the Clean Washer with AFFRESH™ cycle. Use this cycle
with an empty wash drum.
Normal Sounds
As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked or unlocked, and during the washing, rinsing, or spinning
process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation. See “Troubleshooting.”
Options
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.
■See the “Laundry Guide” section for an overview of possible
options for each Wash Cycle selection.
■If an option is available with a selected cycle, the light for that
option will illuminate when selected.
■If an option is unavailable with a selected cycle, there will be a
short tone and the light for that option will not illuminate when
selected.
Delay Start
Use this to begin the wash cycle later.
■Press DELAY START until the desired time (in hours) shows in
the Estimated Time Remaining display.
■Press START/PAUSE. The countdown to the wash cycle will
show in the display window.
Extra Rinse
An extra rinse can be used to aid in the removal of detergent
residue from garments. This option provides an additional rinse
with the same water temperature as in the normal rinse. It is
automatic for the Whitest Whites cycle. You may select or
deselect by pressing OPTIONS button until Extra Rinse light
glows.
TumbleFresh™ option
Use this option when you are not able to unload your clothes,
soon after the wash cycle ends. This option provides periodic
tumbling for up to 6 hours to help freshen your clothes. During this
time, the “Done” indicator remains activated, the door remains
locked, and the TumbleFresh™ option indicator light will flash.
The TumbleFresh™ option will automatically stop and the door
lock will be released after this time expires, or if you press POWER
at anytime to unload your laundry.
Temp
Each cycle has a preset water temperature setting. To change the
water temperature, select the TEMP button until the desired
setting is illuminated.
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
In wash water temperatures colder than 60ºF (15.6ºC), detergents
do not dissolve well. Soils may be difficult to remove.
Temperature Guide
Temp Suggested Fabrics
SANITARY Sturdy colorfast fabrics
Heavy soils
HOTWhites and pastels
Heavy soils
WARMBright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
In wash water temperatures colder than 60°F (15.6°C), detergents
do not dissolve well. Soils may be difficult to remove.
Sanitary Temp
This washer has a Sanitary Temp that is certified by NSF
International, an independent, third party testing and certification
organization. The certification verifies that this option eliminates
99.9% of bacteria typically found on clothing, bedding, and
towels. There is no carryover of bacteria between loads after the
option is complete.
Only Sanitary temperature option has been designed to meet the
requirements of NSF Protocol P172 for Sanitizing Efficacy.
Certified to Sanitize
Use the Sanitary temperature option to clean heavily soiled,
colorfast fabrics. This option combines a super hot water
temperature to help ensure the removal of heavy soils and stains.
It is recommended that you set your hot water heater to 120°F
(49°C) to ensure proper performance during this option.
The Sanitary Temp removes more than 95% of common
household allergens.

17
Controlled Temperature
Warm and cold wash temperatures are sensed and maintained by
regulating the amount of hot and cold water from your faucet. This
provided excellent cleaning while saving energy.
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water.
■Cold rinse is not controlled and will be the same as your cold
faucet.
SPIN SPEED
Each cycle has a preset SPIN SPEED. To change the spin speed,
select the SPIN SPEED button until the desired setting is
illuminated.
Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OFF.
Laundry Guide
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS
Delay
StartExtra
Rinse TumbleFresh™ Option Signal
Whitest Whites Soiled white fabrics ✔✔ ✔ ✔
Eco Whitest
Whites Soiled white fabrics ✔✔ ✔ ✔
Eco Heavy
Duty Heavily soiled underwear, towels, shirts, etc., made of cotton ✔✔ ✔ ✔
Heavy Duty Heavily soiled underwear, towels, shirts, etc., made of cotton ✔✔ ✔ ✔
Bulky Normally soiled blankets and comforters ✔✔ ✔ ✔
Normal Normally soiled blouses, shirts, overalls, etc., made of
polyester, nylon, cotton, linen, or cotton blends
✔✔ ✔ ✔
Small Load Small loads of 2-3 lightly soiled cotton, polyester, nylon, and
cotton blends
✔✔ ✔ ✔
Delicate Curtains and delicate clothing, dresses, skirts, shirts and
blouses, fabrics made of silk, and special care items marked
“Hand Washable”
✔✔ ✔ ✔
Silk Silk or ultra delicate fabrics labeled as machine washable ✔✔✔
Rinse/Drain &
Spin All loads ✔✔ ✔ ✔
Soak All loads ✔✔
Clean Washer
with
AFFRESH™
No clothes ✔✔

18
LAUNDRY TIPS
Preparing clothes for washing
Follow these recommendations to help you prolong the life of your
garments.
■Use only High Efficiency detergents. The package for this type
of detergent will be marked “HE” or “High Efficiency.” This
wash system, along with less water, will create too much
sudsing with a regular non-HE detergent. Using regular
detergent will likely result in washer errors, longer cycle times
and reduced rinsing performance. It may also result in
component failures and noticeable mold or mildew. HE
detergents are made to produce the right amount of suds for
the best performance. Follow the manufacturer's instructions
to determine the amount of detergent to use.
Use only HE High Efficiency detergent.
■Close zippers, snaps, and hooks to avoid snagging other
items. Remove pins, buckles, and other hard objects to avoid
scratching the washer interior. Remove non-washable trim
and ornaments.
■Empty pockets. Small items can be caught with the washer
resulting in noise or plugging the pump.
■Turn down cuffs; brush away lint and dirt.
■Turn wool and synthetic knits inside out to avoid pilling.
■Tie strings and sashes so they will not tangle.
■Mend tears, loose hems, and seams.
■Treat spots and stains.
■Stained or wet garments should be washed promptly for best
results.
■Mix large and small items, avoid washing single items, and
load evenly.
■Wash small items, such as infant socks, in a mesh garment
bag. To create a balanced load it is recommended that more
than one garment bag be used, and that each garment bag be
filled with equal amounts of material.
Sorting
■Separate heavily soiled items from lightly soiled ones, even if
they would normally be washed together. Separate lint-givers
(towels, chenille) from lint-takers (corduroy, synthetics,
permanent press). When possible, turn lint-givers inside out.
■Separate dark colors from light colors, colorfast items from
noncolorfast items.
■Sort by fabric and construction (sturdy cottons, knits, delicate
items).
Unloading
■Remove clothes from washer after the cycle is completed.
Metal objects such as zippers, snaps, and buckles may rust if
left in the washer basket for a long time.
■When unloading garments, occasionally check under the
colored seal at the front of the tub for small items.
Loading
Loading suggestions
Heavy Work Clothes
2 pair pants
3shirts
3 pair jeans
1 coverall
Mixed Load
2 double sheets or
1 king size sheet(s)
4 pillowcases
6T-shirts
6pairshorts
2shirts
2blouses
6 handkerchiefs
Towels
8bathtowels
8handtowels
10 washcloths
1bathmat
Delicates
3 camisoles
4slips
4panties
2 bras
2 nighties
SMALL LOAD cycle
(2-3 garments)

2 dress shirts
1 pair dress pants

19
Stain Removal Guide
Stain Use Liquid Chlorine or
Color-Safe Bleach Use suggested Wash Cycle Stain Use Liquid Chlorine or Color-Safe Bleach Use suggested Wash Cycle
Ink
✔Whitest Whites
Grass
✔Whitest Whites
Blood
✔Cold or Warm
Normal
Tomato
Products
✔Whitest Whites
Coffee/
Chocolate
✔Warm/Soak
TumbleFresh™
option
Whitest Whites Mud
✔Warm/Soak
TumbleFresh™
option
Whitest Whites
Cosmetics
Heavy Duty
Deodorants
Heavy Duty
Dirty
Motor Oil
Warm/Soak
TumbleFresh™
option
Heavy Duty
Ringaround
the Collar
✔Normal
Do not tumble dry soiled or stained items. Heat may permanently set stains.

20
WASHER CARE
Cleaning Your Washer
Cleaning the Door Seal/Bellow
1. Open the washer door and remove any clothing or items from
the washer.
2. Inspect the colored seal/bellow between the door opening
and the basket for stained areas. Pull back the seal/bellow to
inspect all areas under the seal/bellow and to check for
foreign objects.
A
A. Seal/Bellow
3. If stained areas are found, wipe down these areas of the seal/
bellow, using the procedure that follows.
a) Mix a dilute solution, using ¾ cup (177 mL) of liquid
chlorine bleach, and 1 gal. (3.8 L) of warm tap water.
b) Wipe the seal/bellow area with the dilute solution, using a
damp cloth.
c) Let stand 5 minutes.
d) Wipe down area thoroughly with a dry cloth and let the
washer interior air dry with door open.
IMPORTANT:
■Wear rubber gloves when cleaning for prolonged periods.
■Refer to the bleach manufacturer’s instructions for proper use.
Washer Maintenance Procedure
This washer has a special cycle that uses higher water volumes in
combination with AFFRESH®washer cleaner or liquid chlorine
bleach to thoroughly clean the inside of the washer.
NOTES:
■Read these instructions completely before beginning the
cleaning process.
■If necessary, the cleaning cycle may be interrupted by
pressing the POWER button twice. However, this will not
immediately stop the cycle. The machine will continue with
several rinse and drain steps to ensure that all remaining
AFFRESH®washer cleaner or liquid chlorine bleach is rinsed
from the washer.
Begin procedure
1. Open the washer door and remove any clothing or items from
the washer.
2. Using the AFFRESH®washer cleaner (Recommended): 
Add one AFFRESH®washer cleaner tablet to the washer
drum.
If using liquid chlorine bleach:
3. Open the dispenser drawer and immediately add 2/3cup
(160 mL) of liquid chlorine bleach to the bleach compartment.
NOTE: Do not add any detergent to this cycle. Use of more
than 2/3cup (160 mL) of bleach will cause product damage
over time.
4. Close the washer door and dispenser drawer.
5. Select the Clean Washer with AFFRESH™ cycle.
6. Press START/PAUSE.
NOTE: The basket will rotate, then the door will unlock, lock
again, and then the cycle will continue.
■The machine will not fill, but the basket will rotate while the
washer runs a short sensing cycle. This will take
approximately 3 minutes.
7. The cycle will determine whether clothing or other items are in
the washer.
a)
b)
If no items are detected in the washer, it will proceed to
Step 8.
If the Wash LED light flashes, the door will unlock.
Remove clothing or items in the washer.
■Press POWER to cancel the flashing LED light. Then
repeat steps 1, 2, and 6 to start the cycle again.
8. Once the cycle has begun, allow the cycle to complete.
9. After the cycle is complete, leave the door open slightly, to
allow for better ventilation and drying of washer interior.
Always do the following to maintain washer freshness
■Use only HE High Efficiency detergent.
■Leave the door slightly open after each cycle to allow for
better ventilation and drying of washer interior.
■Repeat the cleaning procedure monthly.
■If the procedure does not sufficiently improve the machine
freshness, please evaluate your installation and usage
conditions for other causes.
Cleaning the exterior
Use a soft damp cloth or sponge to wipe up any spills.
Occasionally wipe the outside of your washer to keep it looking
new. Use mild soap and water. Do not use abrasive products.
Cleaning the dispenser drawer
The dispenser drawer is removable for easy cleaning.
1. Unlock the dispenser drawer by pressing the Release Lever.
See “Using the Dispenser.” Remove the drawer.
2. Remove the inserts (the siphon from the softener and bleach
compartments).
3. Wash the parts under running water.
NOTE: Do not wash components in the dishwasher.
4. Replace the inserts and return the dispenser to the drawer.