Whirlpool WhiteMagic LSE805 User manual

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
LSE805 Installation instructions

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Slide the strap as shown
Cut the adhesive tape

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Open the carton flap

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Take the Rat mesh and keep it separately

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Take the top cushion and keep it separately

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Slide the carton upwards

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Remove the corner posts( 4 corners)

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Remove the machine cover

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Open the lid and remove the cushion balance ring

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Lift th machin
R mov th bottom cushion

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Tilt the Machine to the Right side and
remove the suspension bracket.
Suspension
Bracket

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Assemble the rat mesh as shown

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Installation of LSE805-60 Hz
Ensur all th 4 f ts touch th floor v nly and corn rs ar l v l with ach oth r.
Donot plac th machin on Slanting / un v n / unstabl surfac .
Plac on a solid l v ll d surfac to avoid xc ssiv vibration during op ration.
K p th machin at l ast 10cm away from th wall on all sid s.
Ensur th ass mbly of rat m sh at th tim of installation.
Ensur Susp nsion brack t is r mov d from th machin b for op ration.
Ensur Inl t fill hos is conn ct d to th Tap through tap adopt r.
Plac th drainhos flat on th floor b for op rating th machin .
Ensur th arth conn ction in your El ctrical supply is prop r b for th conn cting th pow r cord.
Th sock t should b standard and ind p nd nt of 2 pin typ of 220V/60 Hz.
Do not us xt nsion junction box sinc it may not b prop rly arth d.

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Installation of LSE805-60 Hz
Pr paration for Washing
Conn ct th fill hos to a wat r tap and turn th tap on.
Unhook th drainhos and lay it flat on th floor
Plug th pow rcord in to th l ctrical sock t prop rly.
Loading th Machin
S parat Whit s from color d cloth s, and lint giv rs ( g: tow ls) from lint tak rs
(Dark color garm nts tc.,).
Donot stuff th cloth s or wrap th m around th agip ll r – drop th m loos ly and v nly around th agip ll r.
Th cloth s should b abl to mov fr ly in th wat r for b st wash r sults.
Small cloth s lik hand k rchi fs or small tow ls should b load d in th middl of th wash r to avoid flying of cloth s during dry s nsing op ration.
Not :1) In cas th ,th wat r pr ssur in v ry low (l ss than 5lpm), scatt r th d t rg nt in th bottom of th bask t
b for loading th cloth s.
2) For Wool : Us Mild liquid d t rg nt.

WHIRLPOOL CORPORATION CONFIDENTIALWHIRLPOOL CORPORATION CONFIDENTIAL
Installation of LSE805-60 Hz
Machin op ration
Pr ss th pow r button to Switch On th machin
S l ct th d sir d program (6 programs). Pr ss “Start” to b gin th wash proc ss
At th nd of wash proc ss,machin giv s buzz r sound to indicat th wash proc ss compl tion to th consum r .