Whirlwind The Bomb User manual

HANDMADEINROCHESTER,NY e Bm - 26B  Clean B
Warranty:
This product is warranted to be free of defects in materials
or workmanship to the original purchaser for a period of 2
years from the date of purchase. Should warranty service
be required, return the unit postage paid along with the
original sales receipt to:
Whirlwind Music Dist., Inc.
99 Ling Road
Rochester NY 14612
Whirlwind will, at its option, repair or replace the unit.
This warranty does not cover damage resulting from
abuse, unauthorized modications or use of the product in
unintended applications.
1-800-733-9473 | www.whirlwindusa.com
Bomb manual.indd 2-3 10/8/10 10:27 AM

5
2
4
7
3
1
e Bomb
Th BmBPda
1: INPUT JACK Connect a cord from your instrument here. Removing the cord from the INPUT jack
when not in use disconnects the battery which will prolong battery life.
2: OUTPUT JACK Connect a cord out to your amplier here.
3: 9VOLT INPUT Connect an optional power supply here. Accepts an industry standard 9 Volt regulated
DC supply with a 2.1mm barrel type connector, center contact negative. The Whirlwind PS9V-EFX
power supply is recommended for proper operation.
4:This controls the amount of boost applied to the signal. At full counter-clockwise (“1”), there is no
boost, the unit is at unity gain. As the knob is turned up, the gain gradually increases until it reaches
+26 dB of gain at full up (“11”).
5: STATUS LED Illuminates when the eect is active.
6: FOOTSWITCHTurns the eect on and o.When OFF, the unit is completely removed from the signal
path (TRUE BYPASS).
7: BATTERY COMPARTMENT Remove 4 screws on the bottom of the unit to access the battery. Be sure to
leave the protective insulator in place to prevent the circuit board from contacting the metal case.
6
Bomb manual.indd 4-5 10/8/10 10:27 AM