Whittier Wood Furniture 1500AFGACb User manual

Model #
1500AFGACb; 1500AFCAFb
Beveled Mirror
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 12/11
Congratulations!
This fine piece of furniture will make a gorgeous addition
to your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended to
use this product in a commercial setting.
•Handle the mirror with care. Glass is fragile.
•Before you begin your project, completely read the
Assembly Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
•Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE
CALL US FIRST! Do not return this item to the store.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, phone, fax, mail or email your request to the Whittier
Wood Products customer service department.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1500AFGACb; 1500AFCAFb Beveled Mirror
Parts List
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part Description Quantity
Ab Mirror Assembly 1
B Mirror 1
Cb Mirror Frame (attached) 1
D Mirror Frame Bracket (attached) 1
F Short Top 1
G Long Top 1
H Mirror Wall Bracket 1
I #8 x 1-3/4" Pan Head Screw 2
K #8 x 1-1/4" Black Screw 4
L #6 x 3/4" Flat Head Screw (inserted) 4
N Mirror Support 2
O M4 x 41 mm Machine Screw 4
P #7 x 1-1/2" Black Pan Head Screw 4
Q Pad Strip 3
R #8 x 1-1/4" Pan Head Screw (inserted) 4
S Short Mirror Support (attached) 2
T Long Mirror Support (attached) 2
U #6 x 5/8" Philtruss Screw (inserted) 14
1500AFGACb_1500AFCAFb — Page 2 — 12/11

1500AFGACb; 1500AFCAFb Beveled Mirror
Assembly Instructions
Tools Required: Phillips Screwdriver, Tape Measure, Pencil
You have the option of attaching your Mirror to the wall or to selected McKenzie Dressers. To
attach your Mirror to the wall, follow steps 1 – 5. To attach the Mirror to a McKenzie Dresser,
follow steps 6– 12.
1. Decide if you want your Beveled Mirror to hang either vertically or horizontally. If you want it to
hang vertically, remove the Mirror Frame Bracket (D) and line it up to the predrilled holes on
the short side of the Mirror Frame (Cb) as in Figure 1. Attach with four #6 x 3/4" Flat Head
Screws (L).
Fig. 1
Cb
D
L x 4
2. If you want a top on the mirror, attach the Short Top (F) or the Long Top (G) to the Mirror Frame
(Cb) with four #8 x 1-1/4" Black Screws (K) as shown in Figure 2.
Fig. 2
K x 4
G Long Top (for horizontal)
B
K
F Short Top (for vertical)
Cb
1500AFGACb_1500AFCAFb — Page 3 — 12/11

1500AFGACb; 1500AFCAFb Beveled Mirror
Assembly Instructions
3. Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. For a vertical placement, use a tape measure and measure up 37-3/8" from that mark.
Draw a faint line. For a horizontal placement, measure up 25-3/8". Draw a faint line. The top line
is where you attach the Mirror Wall Bracket (H). If you like, you can erase the faint bottom pencil
mark. See Figures 3 and 3a.
Vertical Wall Mount
Wall
Horizontal Wall Mount
Fig. 3 Fig. 3a
Wall
37-3/8” 25-3/8”
4. Locate two studs in the wall behind the space where you want to hang your Beveled Mirror. Affix
the Mirror Wall Bracket (H) into the studs with two #8 x 1-3/4" Pan Head Screws (I). If you
cannot locate two studs, purchase the proper wall attachment hardware for your type of wall and
secure the bracket. See Figure 4.
Fig. 4
Wall
H
I x 1 x 2
H
I
1500AFGACb_1500AFCAFb — Page 4 — 12/11

1500AFGACb; 1500AFCAFb Beveled Mirror
Assembly Instructions
5. NOTE: The Mirror Wall Bracket (H) angles out at the top. When you hang your Beveled Mirror,
the Mirror Frame Bracket (D) fits over the angled part of the Mirror Wall Bracket (H).
See Figure 5.
Mirror Wall
Brackets (H)
(back view)
Wall
Stud
Mirror Wall Bracket (H)
(
side view
)
Wall
Fig. 5
Mirror Frame
Bracket (D)
(back view)
6. To attach the Mirror to a McKenzie Dresser, remove the Mirror Frame Bracket (D) that is
attached to the Mirror Frame (Cb) as shown in Figure 6. Keep this bracket along with the Mirror
Wall Bracket (H) and the four #6 x 3/4" Flat Head Screws (L) in the chance that in the future,
you will want to mount the Mirror to the wall.
L x 4
Fig. 6
Cb D
L
1500AFGACb_1500AFCAFb — Page 5 — 12/11

1500AFGACb; 1500AFCAFb Beveled Mirror
Assembly Instructions
7. If you wish to attach a Top, attach the Short Top (F) or the Long Top (G) to the Mirror Frame
(Cb) with four #8x1-1/4" Black Screws (K) as shown in Figure 7.
Fig. 7
K x 4
G Long Top (for horizontal)
B
K
F Short Top (for vertical)
Cb
Continued on Page 7.
1500AFGACb_1500AFCAFb — Page 6 — 12/11

1500AFGACb; 1500AFCAFb Beveled Mirror
Assembly Instructions
8. To attach the Mirror vertically to the Dresser, use the predrilled holes in the back of the dresser
and the predrilled holes noted as vertical mount holes in Figure 8a as guides. To attach the
Mirror Supports (N), insert Machine Screws (O) into the third hole from the top and the bottom
hole in each Mirror Support (N) and into the proper holes in the Back. See Figures 8 and 8a.
9. To attach the Mirror horizontally to the Dresser, use the predrilled holes in the back as noted in
Figure 9.
O
Vertical Mount
Fig. 8
(Back view)
N
O O
Bottom hole
Third hole from the top
O x 4
Vertical mount holes
Fig. 8a
1128 Dresser
Horizontal mount holes
Horizontal Mount
Fig. 9
1500AFGACb_1500AFCAFb — Page 7 — 12/11

1500AFGACb; 1500AFCAFb Beveled Mirror
Assembly Instructions
10. Attach the Mirror Supports by inserting Machine Screws (O) into the third hole from the top and
the bottom hole of the Mirror Support and into the back. See Figure 10.
Horizontal mount
O
Third hole from the top
(Back view)
N
O O
bottom hole
Fig. 10
11. Peel off the backings on the Pad Strips (Q) and apply them to the bottom of the Mirror Assembly
(Ab). See Figures 11 and 11a.
Q
Fig. 11
Vertical Mirror
Horizontal Mirror
Q
Fig. 11a Q Q
1500AFGACb_1500AFCAFb — Page 8 — 12/11

1500AFGACb; 1500AFCAFb Beveled Mirror
Assembly Instructions
12. Place the Mirror on top of the Dresser and attach it to the Mirror Supports (N) with
four #7 x 1-1/2" Black Pan Head Screws (P). See Figures 12 and 12a.
Fig. 12a
P x 4
Fig. 12
P P P P
Horizontal MirrorVertical Mirror
1500AFGACb_1500AFCAFb — Page 9 — 12/11