Whittier Wood Furniture McKenzie Accent Table 3497AUF User manual

Production Code:
01/11
VN
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions and Finishing Hints before
you begin your project.
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, contact Whittier Wood
Products customer service department by
phone, fax, mail or email.
To Order: Provide the furniture model number (found
above the illustration of your unit), the part letter,
production code, quantity needed, reason for replacement
and your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
Assembly Instructions
Model #
McKenzie Occasional Table
3497AUF
McKenzie Accent Table
3498AUF
McKenzie Side Table
3499AUF
McKenzie Cocktail Table
Before you load or move this unit, tighten all screws
and supports.
.
Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
For normal household use only. Not recommended
to use commercially.
Unload items before you move this unit.
Do not overload the shelf.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a
cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:

3497AUF_3498AUF_3499AUF — Page 2 — 01/11
3497AUF; 3498AUF; 3499AUF
McKenzie Occasional Table — Parts List
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
Part Description Quantity
3497AUF 3498AUF 3499AUF
3499 shown in the illustrations.
ATop Assembly 1 1 1
CShelf Assembly 1 1 1
BLeg 4 4 4
I T-Nut (inserted) 4
JAdjustable Glide (inserted)
D #8 x 1-1/4" Pan Head Screw
KWood Dowel (inserted)
HInsert Nut (inserted)
E5/16" Flat Washer
F3/8" x 2-1/2" Hex Bolt
4
34
(26 inserted)
34
(26 inserted)
51
(43 inserted)
G #8 x 1-3/4" Pan Head Screw (inserted)
4
4
0
4
4
4
4
4
4
4
4
4
4
4
4
0 14
4
4

3497AUF_3498AUF_3499AUF — Page 3 — 01/11
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
Assembly Instructions
3497AUF; 3498AUF; 3499AUF
McKenzie Occasional Table
Fig. 1
Fig. 2
Fig. 1a
B
C
E x 4
x 4F
F
EB
A
F
E
1. Turn the Top Assembly (A) upside-down on a clean, protected surface. Position the Legs (B) in
the corners so the Insert Nuts ((H) face in. LOOSELY attach with four 5/16" Flat Washers (E)
and four 3/8" x 2-1/2" Hex Bolts (F) (the legs should be wobbly). See Figures 1 and 1a.
2. Turn the Shelf Assembly (C) upside-down and place the dowels into the dowel holes in the Legs.
Tighten the Hex Bolts on the Legs. See Figure 2.

D
D
x 8D
Fig. 3a
Fig. 3
Fig. 4
3497AUF_3498AUF_3499AUF — Page 4 — 01/11
4. Turn the table upright and place the table at its final destination. To level the table, rotate the
Adjustable Glides (J) found on the bottoms of the legs.
3. Using the pocket holes as guides, secure the Shelf (C) to the Legs (B) with eight #8 x 1-1/4" Pan
Head Screws (D). See Figures 3 and 3a.
JJ

Rubber
gloves
Rags
Paper towels
Q-tips
Tack cloth
Drop cloth
Paint brushes
(bristle and
foam)
#220 & #320
sandpaper
Mineral spirits
Masking Tape
Rev. 8/07
Finishing Hints
Choosing the Finish:
Getting Started
1. Choose a finish that will meet your expectations for
the product you are finishing. Are you matching
existing furniture or do you want a “natural” finish?
Is the piece to be functional, decorative or both?
The answers to these questions may affect the
type of finish you choose.
1. Assembly Instructions may contain special
finishing information for that item. Read both
the Assembly Instructions and these Finishing
Hints completely before beginning.
2. Sand the entire piece, using #220 grit sandpaper.
Sand with the grain of the wood on flat surfaces
and opposite the grain on turnings. Some parts
are plywood. Be careful not to sand through the
veneer. End grain (table top ends, seat edges,
grooves on turnings, etc.) accepts more stain.
Extra sanding in these areas with a #320 grit sand-
paper will reduce stain absorption, creating a more
evenly stained piece.
3. When sanding is completed, wipe the surface of
your furniture with a cloth or tack rag. Make sure
the item is free of dust before proceeding.
2.
Use products of the same brand to ensure compat-
ibility of products.
4. We recommend using a wood conditioner under oil
base stains.
5. Work in a well ventilated and well lit area.
3.
ALWAYS follow the stain manufacturer’s instruc-
tions. Alder is a porous hardwood
and often
looks best when following the finishing directions
for softwoods
1. Read and follow label directions. Stir stain well
before starting.
4. Q-tips are ideal for hard to reach areas.
5. Allow to dry thoroughly before proceeding.
2.
Test stain on an inconspicuous spot on your proj-
ect, or use the sample chip if one is provided. The
sample chip must be sanded in the same way as
your furniture kit to ensure the piece will accept the
stain similarly. Put at least one coat of your top coat
over the stain sample, as it also affects the look of
the stain. Test every type of wood that is in your
kit. Some of our products include more than one
type of wood, which may react differently to the
stain color. Sample chips for the different woods
may be included. It may be necessary to add a
second coat of stain to lighter woods to match the
darker woods in your kit.
3. Apply stain with a poly brush or lint-free cloth. Apply
stain over a small area and wipe off excess. Work-
ing in small areas will make the color easier to con-
trol.
1. Always read and follow all label directions. Stir
your finish coat gently, do not shake. It will create
bubbles that are hard to remove.
2. All surfaces (including the underside of table tops
and inside drawers) must be sealed with at least
one layer of a top coat. This will help minimize
wood swelling, shrinkage, warping and cupping
due to changes in moisture content or temperature.
3. We recommend that you apply a minimum of two
coats when using polyurethane or varnish
(especially on all table top and work surfaces).
Sand lightly between coats using a #320 grit sand-
paper or 00 steel wool for the smoothest possible
finish.
4.
Some water-based finishes tend to raise the grain
slightly. This can be easily controlled with this sand-
ing step. However, do not use steel wool when using
water-based finishes. Strands of steel fiber caught
in the wood can cause rust spots when coated with
any water-based product.
1. For best results when painting, first coat the wood
with a primer. An oil based primer would be best for
a smooth finish. If you do not wish to use a solvent
based primer, a water based primer would work
almost as well.
2. Buy a quality brand paint. You may use a satin,
semi-gloss, or gloss sheen. Apply a second coat
for a smooth finish. Lightly sand between coats
using a #320 grit sandpaper, so that the second
coat will bond well. Repeat as desired.
3. Since there is such a variation between paint
manufacturers, refer to your paint supplier for spe-
cific advice on using the paint that you purchase.
Staining
Applying the Top Coat:
Painting:
No top coat is required if using paint.