Whittier Wood Furniture McKenzie 1100AFGAC User manual

Production Code:
08/10
VN
P.O. Box 2827
Eugene, OR 97402 USA
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, directly contact Whittier
Wood Products customer service department by
phone, fax, mail or email.
To Order: Designate the finish, provide the furniture
model number (to the left of the illustration), the part letter,
production code, quantity needed, reason for replacement,
your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m.
(Pacific Time). You may leave a message 24 hours
a day, seven days a week.
Assembly Instructions
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
McKenzie
Nightstand
1100AFGAC
1100AFCAF
1101AFGAC
1101AFCAF
Model #
Model #
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this piece of furniture.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40° F to 90° F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
Unload items before you move this unit.
Before you load or move this unit, make sure all
screws and supports are tight.
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place the heaviest items in the bottom drawers.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
Never allow children to climb or hang on drawers,
doors or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce
but not eliminate the risk of tip-over.
WARNING!
Small 3-Drawer
McKenzie
Nightstand
3-Drawer
McKenzie
Nightstand

1100AFCAF and 1101AFCAF
1100AFGAC and 1101AFGAC
McKenzie Nightstand – Parts List
1100AFGAC_1101AFGAC_1100AFCAF_1101AFCAF — Page 2 — 08/10
Please identify the parts and check that quantities received match what is on this list.
If you need to replace a part, refer to the following letter and item name.
Part Description Quantity
1100AFGAC 1101AFGAC
1100AFCAF 1101AFCAF
A Top Assembly (attached). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1
B Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1
E Small Drawer Face (attached) . . . . . . . . . . . . . . . . . . 3 0
F Large Drawer Face (attached) . . . . . . . . . . . . . . . . . . . 0 3
L Knob (attached) . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3
Q #8 x 1-1/2" Machine Screw (inserted). . . . . . . . . . . . . . 3 3
I 14" Drawer Slides (installed sets) . . . . . . . . . . . 3 0
J 16" Drawer Slides (installed sets) . . . . . . . . . . . . 0 3
S Adjustable Glide (installed) . . . . . . . . . . . . . . . . . . . 4 4
G Small Drawer Box (inserted) 3 0
H Large Drawer Box (inserted) 0 3
Y #6 x 1/2" Philtruss Screw (inserted) . . . . . . . . . . . . . 18 18
Z #6 x 3/4" Philtruss Screw (inserted) . . . . . . . . . . . . . 18 18
R T-Nut (inserted) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4
T #8 x 7/8" Lo-Profile Screw (inserted) . . . . . . . . . . . . 12 12
U #8 x 1-1/4" Pan Head Screw (inserted). . . . . . . . . . . . 6 6
V #8 x 1-3/16" Black Screw (inserted) . . . . . . . . . . . . 8 12
W #8 x 1-1/4" Black Screw (inserted). . . . . . . . . . . . . . . 8 12
. . . . . . . . . . . . . . . . . . . . . .
X #8 x 1" Black Screw (inserted) . . . . . . . . . . . . . . . 12 12
TR Furniture Tipping Restraint 1 1
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .

1100AFGAC_1101AFGAC_1100AFCAF_1101AFCAF — Page 3 — 08/10
2.
1.
Locate a stud in the wall behind the unit. Attach a Clip (T1) to the wall stud with two #8 x 2" Black
Screws (T3). See Figure 1. Attach the second clip to the unit with two #8 x 1" Pan Head Screws (T4).
See Figure 2. Connect the two clips with the Nylon Restraint Strap (T2). Pull the Nylon Restraint
Strap (T2) tight so there is no slack. See Figures 3a and 3b. If you cannot locate a stud, purchase
the proper wall attachment hardware for your type of wall and secure the unit.
Unless specifically designed to accommodate, do not set TVs or
other heavy objects on top of this product.
To level the unit:
Tipping restraint:
Position the unit at the desired location. Adjustable glides (S) are attached to the bottoms of the legs.
Rotate the glides until the unit stands level.
T2
T1
T1
T3
T3
T4
Fig. 3a
Fig. 1
Fig. 3b
Fig. 2
Tighten the Nylon
Restraint Strap (T2)
so there is no slack.
Pull tight
T1
T4