Whittier Wood 5197AFGMS User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 03/14
Model #
5197AFGMS
Ambierle
Chairside Table
Glazed Millstone finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawer.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

5197AFGMS Ambierle Chairside Table
Parts List
5197AFGMS —Page 2 —03/14
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Case Assembly
1
B
Leg
4
C
Drawer Box (inserted)
1
D
Drawer Face (installed)
1
E
Drawer Slide (pre-installed set)
1
F
#6 x 3/4" Philtruss Screw (inserted)
6
G
#6 x 1/2" Philtruss Screw (inserted)
6
H
#8 x 1-3/8" Lo-Profile Screw (inserted)
8
I
#8 x 1-1/4" Pan Head Screw (inserted)
42
J
#8 x 7/8" Black Lo-Profile Screw (inserted)
4
K
3/8" x 1" Insert Nut (inserted)
8
L
1/4" x 20mm Insert Nut (inserted)
4
M
Adjustable Glide (installed)
4
N
Knob (attached)
1
O
#8 x 1-1/4" Machine Screw (installed)
1
P
5/16" Flat Washer
8
Q
3/8" x 2-1/2" Hex Bolt
8

5197AFGMS Ambierle Chairside Table
Assembly Instructions
5197AFGMS —Page 3 —03/14
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
1. Remove the Drawer (C) from the Case Assembly (A). To remove the drawer, pull up on the left
side of the Drawer Release Lever while pushing down on the right Drawer Release Lever. See
Figure 1a.
2. Turn the unit upside down on a clean, protected surface. Place two Legs (B) at the front corners
of the Case Assembly (A) making sure the drilled corners of the legs face toward the Corner
Blocks. Insert two 3/8" x 2-1/2" Hex Bolts (Q) with two Flat Washers (P) through the Corner
Blocks and into the leg and fasten securely. See Figures 2 and 2a. Repeat for the other two
legs.
Fig. 1
Drawer Release Lever
Fig. 1a
Fig. 2
Fig. 2a
Q
P
B
B
Q
P
A
P
Q
x 8
x 8

5197AFGMS Ambierle Chairside Table
Assembly Instructions
5197AFGMS —Page 4 —03/14
3. Turn the table upright and insert the Drawer (C).
4. Place the table at its final destination. To level the table, rotate the Adjustable Glide (M) found at
the bottom of each leg assembly. See Figure 3.
Fig. 3
M
M