Whittier Wood 1507RGB User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 09/15
Model #
1507RGB
Stonewood Landscape Mirror
RGB = Rustic Glazed Brown finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Handle the mirror with care. Glass is fragile.
•Before you begin your project, completely read the Assembly
Instructions.
•Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
•Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1507RGB Stonewood Landscape Mirror
Parts List
1507RGB — Page 2 — 09/15
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Mirror Assembly
1
B
Mirror Frame
1
C
Mirror (attached)
1
D
Short Mirror Retainer (attached)
2
E
Long Mirror Retainer (attached)
2
F
Mirror Support
2
G
#6 x 3/4" Brass Flat Head Screw (inserted)
4
H
#6 x 5/8" Philtruss Screw (inserted)
16
I
#8 x 1-3/4" Pan Head Screw
2
J
#7 x 1-1/2" Black Pan Head Screw
4
K
M4 x 41mm Machine Screw
4
L
Velvet Pad 50 x 50mm
3
M
Mirror Wall Bracket
2
(1 attached)

1507RGB Stonewood Landscape Mirror
Assembly Instructions
1507RGB — Page 3 — 09/15
Tools Required: Phillips Screwdriver, Tape Measure, Pencil
You have the option of attaching your Mirror to the wall or to selected Stonewood Dressers.
To attach your Mirror to the wall, follow steps 1 – 4. To attach the Mirror horizontally to a
compatible Stonewood Dresser, follow steps 5 – 9.
1. Decide if you want your Mirror to hang either vertically or horizontally. If you want it to hang
vertically, remove the Mirror Wall Bracket (M) and line it up to the predrilled holes on the short
side of the Mirror Frame (B) as in Figure 1. Attach with four #6 x 3/4" Flat Head Screws (G).
2. Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. For a vertical placement, use a tape measure and measure up 47-1/2" from that mark.
Draw a faint line. For a horizontal placement, measure up 33-1/2". Draw a faint line. The top line
is where you attach the Mirror Wall Bracket (M). If you like, you can erase the faint bottom pencil
mark. See Figures 2 and 2a.
Fig. 1
B
M
G
x 4
Vertical Wall Mount
Wall
Horizontal Wall Mount
Fig. 2
Fig. 2a
Wall
47-1/2"
33-1/2"

1507RGB Stonewood Landscape Mirror
Assembly Instructions
1507RGB — Page 4 — 09/15
3. Locate two studs in the wall behind the space where you want to hang your Mirror. Affix the
Mirror Wall Bracket (M) into the studs with two #8 x 1-3/4" Pan Head Screws (I). If you cannot
locate two studs, purchase the proper wall attachment hardware for your type of wall and secure
the bracket. See Figure 3.
4. NOTE: The Mirror Wall Bracket (M) angles out at the top. When you hang your Mirror, the
bracket that is attached to the back of the Mirror fits over the angled part of the Mirror Wall
Bracket (M). See Figure 4.
Mirror Wall
Brackets (M)
(back view)
Wall
Stud
Mirror Wall
Bracket (M)
(side view)
Wall
Fig. 4
Mirror Wall
Bracket (M)
(back view)
Fig. 3
Wall
M
I
M
I
x 1
x 2

1507RGB Stonewood Landscape Mirror
Assembly Instructions
1507RGB — Page 5 — 09/15
5. To attach the Mirror to a Stonewood Dresser, remove the Mirror Wall Bracket (M) that is
attached to the Mirror Frame (B) as shown in Figure 5. Keep these Mirror Wall Brackets (M) and
the four #6 x 3/4" Flat Head Screws (G) in the chance that in the future, you will want to mount
the Mirror to the wall.
6. To attach the Mirror horizontally to the Dresser, use the predrilled holes in the back as noted in
Figure 6.
Use outer holes for 1507
mirror
Dresser
Fig. 6
G
x 4
Fig. 5
B
M
G

1507RGB Stonewood Landscape Mirror
Assembly Instructions
1507RGB — Page 6 — 09/15
7. Using the predrilled holes on the back of the Dresser as guides, attach the two Mirror Supports
(F) with four M4 x 41 Machine Screws (K). The upper screws will be inserted into the 3rd hole
from the top and the lower screws will be inserted into the 2nd hole from the bottom of the Mirror
Supports. See Figure 7 and 7a.
8. Peel off the backing on the Velvet Pads (L) and apply them to the bottom of the Mirror Assembly
(A). See Figure 8.
L
L
L
Fig. 8
A
K
x 4
K
Dresser
(Back view)
F
K
K
Fig. 7
3rd hole from the top
2nd hole from the bottom
Fig. 7a

1507RGB Stonewood Landscape Mirror
Assembly Instructions
1507RGB — Page 7 — 09/15
9. Place the Mirror on top of the Dresser and attach it to the Mirror Supports (F) with four
#7 x 1-1/2" Black Pan Head Screws (J). See Figure 9.
Fig. 9
J
x 4
J
J
J