Wholesale Interiors BBT6661 User manual

ASSEMBLY INSTRUCTIONS
MODEL : BBT6661 A1 QUEEN BED
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembly.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
1 of 2
HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 20mm 8 PCS
2M6 FLAT WASHER 8 PCS
3M6 SPRING WASHER 8 PCS
4WOOD SCREW M3.5 x 16mm 8 PCS
5WOOD SCREW M4 x 25mm 8 PCS
6BED SLAT SIDE FITTER 26 PCS
7BED SLAT CENTER FITTER 13 PCS
8WOOD SCREW M4 x 20mm 2 PCS
9M4 ALLEN KEY (BALL SHAPE) 1 PC
10 M5 ALLEN KEY (BALL SHAPE) 1 PC
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL 2 PCS
DCENTER RAIL 1 PC
ECENTER SUPPORT 2 PCS
FCENTER SUPPORT LEG 3 PCS
GBED SLAT 26 PCS
HBED LEG 4 PCS
STEP 1
1
3
2
9
5
F
A
B
D
STEP 1.1
STEP 1.2
STEP 1.1
STEP 1.2
9
1
3
2
5
H
H

CE
4
Palm
Palm
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
ASSEMBLY INSTRUCTIONS 2 of 2
A
10
C
A
10
A
D
Note: Assemble (E) vertically as picture shown.
A
D
8
STEP 2 STEP 3
STEP 5 STEP 6
G7
G
G
6
6G7G6
STEP 2.1
STEP 2.2
STEP 3.2
STEP 3.1
STEP 5.1
STEP 5.2
STEP 4
Loosen the pre-inserted bolt on the
headboard using Allen key ball shape (10).