Wicrypt Lynx User manual

Lynx Instruction Manual
Quick Start Guide
For more information isit www.wicrypt.com

Items Check List
Device
5V Charger and Cable
Sim Card
Page 2
Before starting, check that all the following items have been included with your
device. If anything is missing, contact your dealer
Hotspot hub Device is being referred to as in this manual for the purpose of simplicity
You should install the mobile app or go to the Wicrypt website link
and create a Wicrypt account. www.dashboard.wicrypt.com

Nomenclature
Page 3
Hotspot hub Device is being referred to as in this manual for the ur os
of sim licity
Power Switch
(ON/OFF)
Network IndicatorNetwork Indicator
Wifi Indicator
Ethernet Indicator
Battery Indicator
USB ort
Power Source Port
Ethernet Port
Sim Port
Device Reset

Contents
Page 4
Introduction 2
Items C eck List 2
Nomenclature 3
Contents 4
Quick Start Guide 5
Setting up t e Device 5
Connection via Wi-Fi 6
Connection via Et ernet Cable 7
Device Dashboard Setup 9
How to Connect to your Wicrypt Device 9
How to Register a Device 10
How to Setup Device Password 12
How to C ange Device SSID Name 14
How to Switc from Personal to Business Mode 16
How to Switc from Buisness to Personal Mode 18
How to Setup/C ange your Device name (SSID) to your Business Name 21
Staking 25
How to Stake and Start Mining Wicrypt Network T okens (WN T )25

Quick Startup Guide
Setting up the Device
1
Make su e the inte nal batte y is cha ged, if not, connect the device to a
powe sou ce
2
Inse t you sim ca d o connect to the inte net via you ethe net cable.
3
Tu n ON the Device.
Page 5

Quick Startup Guide
4
Wait for 6 minute for the Wicrypt firmware to fini h initialization. Confirm the
following LED ; Network indicator, Wi-Fi indicator and Ethernet Indicator are
ON.
Page 6
Connection via Wi-Fi
1
En ure that the Wi-Fi light i on and blinking. It can take up to 6 minute for 
the device to be ready
2
Connect your phone or PC via WiFi to the device SSID.
Note: The network indicator blink when it i on

Quick Startup Guide
3
Authenticate your device via the Wicrypt captive portal (this step is only
required if Wicrypt business is enabled)
Page 7
Note: You can access the captive portal using the URL wicryptlogin net or 192 168 4 4 if
the captive portal is not displayed automatically
Connection via Ethernet Cable
1
Kindly follow the steps in setting up your device with a SIM card above in page
5
Set up your device
with a SIM card
2
Connect an ethernet cord from the PC to any of the LAN ports

Quick Startup Guide
4
Click th quick s tup tap and switch from LAN to WAN
Page 8
Not : You can acc ss th captiv portal using th URL wicryptlogin.n t or 192.168.4.4 if
th captiv portal is not display d automatically.
3
Auth nticat your d vic via th Wicrypt captiv portal. (this st p is only
r quir d if Wicrypt busin ss is nabl d).

Dashboard Device Setup
Page 9
How to connect to you Wic ypt Device
1
Insert a SIM card or connect your Wicrypt device via the Ethernet cable to the
internet
2
Make sure you are connected to the device network via Wi-Fi or Ethernet
cable
3
Open your browser and type in the IP 192.168.4.4 or the URL wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or

Dashboard Device Setup
Page 10
How to egiste a Device
1
Insert a SIM card or connect your Wicrypt device via the Ethernet cable to the
internet
4
Input “admin” as the device password to login to the portal
5
Click ‘Login’

Dashboard Device Setup
Page 11
2
Connect your phone or PC ia WiFi to the de ice ia SSID.
3
Open your browser and type in the IP 192.168.4.4 or the URL wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or
4
Click on ‘Register De ice’

Dashboard Device Setup
Page 12
How to Setup evice Password
1
Open your browser and type in the IP 192.168.4.4 or wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or
5
Enter you email and password associated with the device
6
Click ‘Register’

Dashboard Device Setup
Page 13
2
Input “admin as your default password to login to the portal
3
On the device portal, Click ‘Quick Setup’
4
Under ‘Device Password’, input desired password

Dashboard Device Setup
Page 14
2
Input “admin” as you default passwo d to login to the po tal o the passwo d
you might have changed it to.
5
Click ‘Save Changes’
How to Change Device SSID Name
1
Open you b owse and type in the IP 192.168.4.4 o wic yptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wic yptlogin.net D
O

Dashboard Device Setup
Page 15
3
On the device p rtal, Click ‘Quick Setup’
4
Enter desired WiFi name
5
Click ‘Save Changes
NB: The Device w uld be disc nnected and y u will be required t rec nnect
via the new Wi-Fi name

Dashboard Device Setup
Page 16
1
Inse t a SIM ca d o connect you Wic ypt device via the Ethe net cable to the
inte net 
2
Connect to the device netwo k (the SSID usually ends with .wc), 
NB: if the SSID had been changed ea lie . Connect to the SSID used
How to Switch from Personal to Business Mode
3
Open you b owse and type in the IP 192.168.4.4 o wic yptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wic yptlogin.net D
O

Dashboard Device Setup
Page 17
4
Input “admin” a the device pa word to login to the portal 
NB: if you had changed the device pa word. Input the pa word you u ed.
5
Click on ‘Bu ine ’
6
Select Enable 
NB: if you have already et the pa word under the per onal mode, kindly
di able the pa word before enabling bu ine mode

Dashboard Device Setup
Page 18
7
Click on Save Changes’
NB: This will restart the device automatically and you will be required to login
into the device network using the Wicrypt app device login code or a voucher
Note: Device mode by default is personal mode
1
Insert a SIM card or connect your Wicrypt device via the Ethernet cable to the
internet 
How to Switch from Business to Personal Mode

Dashboard Device Setup
Page 19
2
Connect to the device or Mi-Fi network (the ID usually ends with .wc
NB: if the ID had been changed earlier. Connect to the ID used
3
Open your browser and type in the IP 192.168.4.4 or wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or
4
Input “admin” as your default password to login to the portal or the password
you might have changed it to

Dashboard Device Setup
Page 20
5
Connect to the device or Mi-Fi network (the ID usually ends with .wc
NB: if the ID had been changed earlier. Connect to the ID used
6
elect Disabl
NB: if you have already set the password under the business mode, kindly
disable the password before enabling personal mode
7
Click on ‘ ave Changes
NB: This will restart the device automatically and you will be required to login
into the device network using the Wicrypt app device login code or a voucher.