Wicrypt Spider User manual

Spider Instruction Manual
Quick Start Guide
For more information vi it www.wicrypt.com

Items Check List
Before startin , check that all the followin items have been included with your
device. If anythin is missin , contact your dealer
Device
12V Charger
Cat6 Ethernet Cable
Page 2
Hotspot hub Device is bein referred to as in this manual for the purpose of simplicity
You should install the mobile app or o to the Wicrypt website link
and create a Wicrypt account. www.dashboard.wicrypt.com

Items Check List
Antenna
Sim Slot Cover
Modem Slot Cover
Page 3

Nomenclature
Page 4
Hotspot hub Device is being referred to as in this man al for the p rpose of simplicity
Power Indicator
Network Indicator
USB Port
Wifi Indicator
LAN Indicators
SIM Port
Power Port
Ethernet Port
LAN Ports
Device Reset

Contents
Page 5
Introduction 2
It ms Ch ck List 2
Nom nclatur 3
Cont nts 5
Quick Start Guide 6
S tting up th D vic 6
Conn ction via Wi-Fi 7
Conn ction via Eth rn t Cabl 8
Device Dashboard Setup 10
How to Conn ct to your Wicrypt D vic 10
How to R gist r a D vic 11
How to S tup D vic Password 13
How to Chang D vic SSID Nam 15
How to Switch from P rsonal to Busin ss Mod 17
How to Switch from Buisn ss to P rsonal Mod 19
How to S tup/Chang your D vic nam (SSID) to your Busin ss Nam 22
Staking 26
How to Stak and Start Mining Wicrypt N twork Tok ns (WNT) 26

Quick Startup Guide
Setting up the Device
1
Make sure the internal battery is char ed, if not, connect the device to a
power source
2
Insert your sim card or connect to the internet via your ethernet cable.
3
Turn ON the Device.
Page 6

Quick Startup Guide
4
Wait for 6 minutes for the Wicrypt firm are to finish initialization. Confirm that
the follo ing LEDs are On, po er , ifi and internet.
1
Ensure that the Wi-Fi light is on and blinking. It can take up to 6 minutes for 
the devices to be ready
2
Connect your phone or PC via WiFi to the device via SSID.
Page 7
Connection via Wi-Fi

Quick Startup Guide
3
Authenticate your device via the Wicrypt captive portal. (this step is only
required if Wicrypt business is enabled .
Page 8
Note: You can access the captive portal using the URL wicryptlogin.net or 192.168.4.4 if
the captive portal is not displayed automatically.
Connection via Ethernet Cable
1
Ensure that the Wi-Fi light is on and blinking. It can take up to 6 minutes for 
the devices to be ready
2
Connect an ethernet cord from the PC to any of the LAN ports

Quick Startup Guide
3
A thenticate yo r device via the Wicrypt captive portal.
Page 9
Note: Yo can access the captive portal sing the URL wicryptlogin.net or 192.168.4.4 if
the captive portal is not displayed a tomatically.

Dashboard Device Setup
Page 10
How to connect to your icrypt Device
1
Insert a SIM card or connect your Wicrypt device via the Ethernet cable to the
internet
2
Make sure you are connected to the device network (the SSID usually ends
with .wc) via WiFi or Ethernet cable
3
Open your browser and type in the IP 192.168.4.4 or the URL wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or

Dashboard Device Setup
Page 11
How to reg ster a Dev ce
1
Insert a SIM card or connect your Wicrypt device via the Ethernet cable to the
internet
4
Input “admin” as the device password to login to the portal
5
Click ‘Login’

Dashboard Device Setup
Page 12
2
Connect your phone or PC via iFi to the device SSID.
3
Open your browser and type in the IP 192.168.4.4 or the URL wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or
4
Click on ‘Register Device’

Dashboard Device Setup
Page 13
How to Setup evice Password
1
Open your browser and type in the IP 192.168.4.4 or wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or
5
Enter the email and password for your Wicrypt account you wish to connect
your device to.
6
Click ‘Register’

Dashboard Device Setup
Page 14
2
Input “admin” a your default pa word to login to the portal
3
On the device portal, Click ‘Quick Setup’
4
Under ‘Device Pa word’, input de ired pa word

Dashboard Device Setup
Page 15
2
Input “admin” as y ur default passw rd t l gin t the p rtal r the passw rd
y u might have changed it t .
5
Click ‘Save Changes’
How to Change Device SSID Name
1
Open y ur br wser and type in the IP 192.168.4.4 r wicryptl gin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptl gin.net D
Or

Dashboard Device Setup
Page 16
3
On the device port l, Click ‘Quick Setup’
4
Enter desired WiFi n me
5
Click ‘S ve Ch nges
NB: The Device would be disconnected nd you will be required to reconnect
vi the new Wi-Fi n me

Dashboard Device Setup
Page 17
1
Insert SIM c rd or connect your Wicrypt device vi the Ethernet c ble to the
internet 
2
Connect to the device network, 
NB: if the SSID h d been ch nged e rlier. Connect to the SSID used
How to Switch from Personal to Business Mode
3
Open your browser nd type in the IP 192.168.4.4 or wicryptlogin.net
T b N me
192.168.4.4 D
T b N me
wicryptlogin.net D
Or

Dashboard Device Setup
Page 18
4
Input “admin” a the device pa word to login to the portal 
NB: if you had changed the device pa word. Input the pa word you u ed.
5
Click on ‘Bu ine ’
6
Select Enable 
NB: if you have already et the pa word under the per onal mode, kindly
di able the pa word before enabling bu ine mode

Dashboard Device Setup
Page 19
7
Click on ‘Save Chan es’
NB: This will restart the device automatically and you will be required to lo in
into the device network usin the Wicrypt app device lo in code or a voucher
Note: Device mode by default is personal mode
1
Insert a SIM card or connect your Wicrypt device via the Ethernet cable to the
internet 
How to Switch from Business to Personal Mode

Dashboard Device Setup
Page 20
2
Connect to the device or Mi-Fi network (the SS D usually ends with .wc
NB: if the SS D had been changed earlier. Connect to the SS D used
3
Open your browser and type in the P 192.168.4.4 or wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or
4
nput “admin” as your default password to login to the portal or the password
you might have changed it to