WiDrive DX-225 User manual

DX-225
Quick Start Guide
EDSLab Technologies Inc.
Portable Application Storage Server Portable Application Storage Server
DX-225 DX-225
Quick Start Guide Quick Start Guide
[email protected] [email protected]
Portable Application Storage Server
4 AP Mode Connecting
Set the Network Type
Selection switch as the arrow
direction [Access Point]
Then press Power ON/OFF
button
On WinXP computer,
unplug any wired network
connection, if present.
Next, click on [Start] and
right-click on [My
NetworkPlace].Select
[Properties].
Right-click on Wireless
Network Connection and
Select [View Available
Wireless Networks].
Wait 5 to 15 Seconds for list
of wireless networks to be
refreshed.
Select [WiDRIVE ]
wireless computer
-to-computer network.
Click [Connect].
For Window Vista Computer, left click on (located at
left bottom corner of the computer screen) and select
Connect or Disconnect ...
On the Connect to Network pop-up Screen, then double click
on [WiDRIVE ] wireless computer-to-computer network to
connect.
Infrastructure Access Point
If user does not see list of wireless networks, consult the
wireless card’s vendor or software for further instructions.
Next, launch
internet browser
and key in the
IP address
“192.168.2.1”
At the WiDRIVE
webfolder login
screen, select
the Username:
[Admin] and key
in the Password
“admin”
Click on [C]
drive.
User is ready to
upload, download
and change the
setting in Control
pannel in WiD-
RIVE.
5 Setup Wizard/Connection Utility
Please put the installation / Setup CD into the Computer.
8VHUZLOOVHHWKUHH¿OHVLQWKHLQVWDOODWLRQ6HWXS&'
i. WiDRIVE User’s Manual (User Manual.pdf).
ii. WiDRIVE Setup Installer (WiDRIVE _setup.exe).
iii. WiDRIVE Utility (Utility Setup.exe)
Click on WiDRIVE_Setup.exe to start the WiDRIVE Wizard
and utility installation on WinXP or WinVista computer.
For more information or question, please kindly see the
User Manual. Free software drivers for all EDSLab Tech-
nologies products are available 24 hours per dat at the
www.edslab.com. or Please contact us

User’s Manual
USB Cable
AC-DC Power
Adaptor
Quick Start
Guide
Installation/Setup CD
Before you start, please make sure these equipments
are in the package
)DFWRU\3UHVHW&RQ¿JXUDWLRQ
Address : 192.168.2.1
Subnet Mask : 255.255.255.0
Wireless Channel : 6
SSID : WiDRIVE
Security : none
WEP Key : none
WPA, WPA/2 Key : none
Data Access : WEBFOLDER
Admin Username : Admin
Admin Password : admin
Guest Username : Guest
Guest Password : guest
Portable Application Storage Server Portable Application Storage Server Portable Application Storage Server
DX-225 DX-225 DX-225
Quick Start Guide Quick Start Guide Quick Start Guide
[email protected] [email protected] [email protected]
The below are the locations of Switches, Indicators, and Ports
Welcome and thank you for choosing a EDSLab Technologies
Inc. product.
For your convenience, your EDSLab Technologies Inc. prod-
uct is furnished
with two guides:
a. Quick Start Guide
b. Comprehensive PDF* User’s Manual in the
Hard Drive or you can always down from our web
site at www.edslab.com.
1 Introduction
Power On WiDRIVE
- Use as provided AC-DC Power adaptor each time
when turning on WiDRIVE .
- Ensure that the Power jack is fully inserted prior
pressing the On/Off button.
- Press once on the On/Off button to power up the
WiDRIVE .
- Allow 8 to 10 secs for WiDRIVE to be in ready to
use state.
2 Powering ON/OFF
3RZHULQGLFDWRU/('
$FWLYLW\LQGLFDWRU/('
)DFWRU\UHVHWEXWWRQ
86%KLJKVSHHGGDWDSRUW
'&SRZHUFKDUJHSRUW
3RZHU212))EXWWRQ
1HWZRUN7\SH6HOHFWLRQVZLWFK
(AP/Infrastructure)
Power Off WiDRIVE
- Simply press the On/Off button to power off the
WiDRIVE
- The Power LED Light will turn its color from Green
to Orange and it may takes 3 to 8 sec (depending
on the capacity of HDD installed) and then complete
the shut down.
Bottom edge of
mid Case
Please follow 3 easy steps to open the back cover
6OLGHDSODVWLFFDUGRUÀDWGULOOLQWKHDUHDVWKDWPDUNHG
with red arrows. (Red arrows pointing to where the main
tenons are located)
2. Gently lift the back cover by jiggling the plastic card or
ÀDWGULOOXQWLODFUDFNVRXQGLVKHDUG
3. Once the back cover is halfway open, place your thumb
to areas that marked with green arrows and gently slide
the back cover into the direction of where the green ar-
rows pointing.
4. You can easily install HDD into WiDRIVE,
3 HDD Installation