Williams-Sonoma BARRELSON KITCHEN ISLAND User manual


Page1/5






BARRELSON KITCHEN ISLAND
WITH ITALIAN BASALT TOP
OR ABSOLUTE BLACK GRANITE TOP
ASSEMBLY INSTRUCTIONS
Date: 2014-Feb-11
CustomerService877.812.6235www.williams‐sonoma.com


Page2/5
Important Safety Instructions:
Please read all instructions carefully before assembling this Barrelson Island Kitchen.
For your safety, assembly by two or more adults is strongly recommended.
Keep these instructions for future use.
Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the
structural integrity of the item.
Pre-assembly:
Remove all parts and hardware from the box. Place all items on a carpeted or scratch-free work surface, as this
will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the
shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
The use of power tools to aid in assembly is not recommended. Power tools can damage the hardware and split
the wood.
Parts Included:
(A) Stone Top – 1x
(B) Base Frame – 1x
 
Hardware Included:
(C)Towel Bar -2x

(D) Screw
3/16'' x 5/8'' - 12x
(E)Drawer Pull Handle
– 4x

(F) Long Bolt 3/16'' x
1-3/16'' - 8x
(G) Knob - 2x
(H) Short Bolt
3/16'' x 1'' - 2x


Page3/5
Tools Required (not included)
(I) Slotted Head Screw Driver

(J) Phillips Head Screw Driver

Assembly Instruction Steps:
1. Attach the Towel Bar (C) to the Base Frame (B) by aligning the pre-drilled holes found on the side posts, as
seen in the illustration below.
2. Secure with the supplied Screws (D) starting from the outside holes of each rotating plate. Do not tighten until
all Screws (D) are seated.
3. Secure the remaining holes of the plate and keep it loose. Once all screws are seated to the holes, tighten it
using the Slotted Head Screw Driver (not included).
4. Repeat steps 1 to 3 for the 2nd towel bar.
5. Attach the 4 Drawer Pull Handles (E) to the drawer fronts by inserting the bolt stud of the Handles (E), into
the pre drilled holes of the Drawer Front, as seen in the illustration below.
6. Secure with the 8 supplied Long Bolts (F).


Page4/5
7. Attach the 2 Knobs (G) to the lower doors by inserting the 2 Short Bolts (H) to the back holes and gently
rotating the Knob (G) clockwise, as seen below.
8. Use a Philips Head Screw Driver (not included) to tighten the assembly. 

9. Use a level gauge to check if the Base Frame (B) is seated flat on the ground. If it is not level and it rocks,
adjust the levelers (in or out) until the cabinet sits firmly and level on the floor.
10. Remove existing dowel at the top of the leg posts before installing stone top. These dowels are only for the
white marble top.

Note: The base must be leveled before assembling the Stone Top (A).






Page5/5
11. Attach the Stone Top (A) to the Base Frame (B). Make sure the Stone Top (A) is centered front to back and
left to right, as seen in the illustration below.
12. If you wish to reposition the shelf found in the lower cabinet, remove the wood screw underneath the shelf
and adjust to your desired position.
13. Assembly is complete.
Care Instructions:
Always use a chopping board on the Marble Top to prevent any scratching.
Refrain from dropping heavy objects on the marble top.
Dust often using a clean, soft, dry, and lint-free cloth.
Blot spills immediately and wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, harsh abrasives, household cleaners, or furniture polish
on our lacquered finish -as they may damage the finish. The marble is not treated and is porous, which can stain
particularly with dark liquids.
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.

CustomerService877.812.6235www.williams‐sonoma.com 