WillowWood LimbLogic User manual
LimbLogic® Quick-Start Guide
3. To enter Standby Mode:
4. Turn o the Vacuum Pump.
1. Turn on the Vacuum Pump.
Press and hold until digits
flash in “chasing” pattern. Fob
displays current vacuum level.
Pump is Active and will operate
until preselected vacuum level
has been reached.
Press for approximately 2
seconds. Chasing pattern
will be displayed as pump
returns to Active State.
Press for approximately 2
seconds. Chasing pattern will
be displayed, then Standby
Indicator will light.
Press one time.
Pump will beep once.
Wait 10 seconds.
Press one time.
Pump will beep either two
or four times.
To resume vacuum regulation:
2. Turn on the fob.
PN-2015-I
24 MAR 2015
The Ohio Willow Wood Company
15441 Scioto Darby Road
Mt. Sterling, OH 43143
phone 740.869.3377 / 800.848.4930
fax 740.869.4374 www.willowwoodco.com
Ohio Willow Wood Company B.V
Keizersgracht 62/64
1015 CS Amsterdam, The Netherlands
Current
Vacuum
Level
Bilateral Indicators
Standby/
Active
Indicator
(White)
Leak
Indicator
(Red)
Up
Enter
Down
Fob Guide
Vacuum Pump Battery Indicator
50-100%
30-50%
20-30%
< 20%
Refer to full manual for complete instructions.
Patent www.willowwoodco.com/education-and-resources/patents
Other manuals for LimbLogic
3
Table of contents
