
Operating Instructions
Maintenance
Insert the Eyepiece into the eyepiece tubes.
Screw the Objectives into the Nosepiece in order of Magnication (Low to High)
Place Specimen on the Stage - Secure and Center it.
1
Open Package Carefully
Use the dust cover when not in use
Keep in a Cool, Dry place
2
3
4
5
Turn on the Power.
Slowly Adjust Birghtness from Dark to Bright.
Before Powering O - Reduce the Brightness from Bright to dark
Observe the Specimen at Lower Magnication Firstly.
Rotate to Higher Magnications.
Use Fine Focus Knob to obtain a Clear Image.
When viewing at 100X (s.oil) use the oil between the objective & specimen.
When changing objectives adjust the condensers iris diaphragm to control illumination
When replacing the lamp ensure the Power is O
3