Wincor Nixdorf K1 User manual

K1 and K2 POS Motherboard
(with BIOS Setup)
User Manual (Edition June 2017)

Overview........................................................................................6
Introduction .......................................................................................6
Some Highlights of the K1 and K2 Motherboard ...............................6
Motherboard Specification ............................................................7
Block Diagram ....................................................................................7
Internal Connectors ...........................................................................8
Mainboard assembly variants ............................................................9
CPU support .......................................................................................9
Mainboard internal connectors and onboard features .....................9
Serial ports (internal)..................................................................... 9
USB 2.0 (internal).........................................................................10
Mini PCI Express .......................................................................... 11
Memory (internal) .......................................................................12
SATA (internal)............................................................................. 12
Fan (internal) ...............................................................................12
Chassis intrusion connector (internal)......................................... 13
Front panel connector (internal) .................................................13
ATX / 12V Power connector (internal)......................................... 14
LPT (internal) ...............................................................................15
TPM.............................................................................................. 15
PCI Express Slots (internal) ..........................................................16
Mainboard onboard connectors with external access.....................17
Motherboard I/O shield overview (external) ..............................17
PanelLink 2.0 (external) ...............................................................17
VGA (external) .............................................................................20
Keyboard / Mouse (external).......................................................20
LAN (external).............................................................................. 20
USB 2.0 / USB 3.0 (external) ........................................................20
Audio (external)...........................................................................20
Technical Data..............................................................................21
Supported Sleep States....................................................................22
RAID (K1 Motherboard) ...................................................................23
Changing the Battery....................................................................24
UEFI BIOS Setup ...........................................................................25
Standard UEFI BIOS Version .............................................................25
BIOS Menu Bar .................................................................................26
Legend Screen ..................................................................................26
General Help ....................................................................................27
Scroll Bar ..........................................................................................27

Sub-Menu ........................................................................................ 28
Info Screen....................................................................................... 28
Product Name: ............................................................................ 29
BIOS Version:............................................................................... 29
Ethernet MAC Address: ............................................................... 29
UUID Info:.................................................................................... 29
System, Main board, Power Supply: ........................................... 29
Main Menu .................................................................................. 30
System Date [MM/DD/YYYY]....................................................... 30
System Time [XX: XX: XX]............................................................. 30
Processor and Chipset Information............................................. 30
Advanced Menu........................................................................... 31
Sub Menu ACPI Settings............................................................... 31
Enable ACPI Auto Configuration [Enabled] ............................. 32
Sub Menu Trusted Computing..................................................... 32
Security Device Support [Disable] ............................................... 32
TPM State [Disabled]................................................................... 32
Pending operation [None]........................................................... 32
Sub Menu Hardware Configuration............................................. 33
PCH LAN Controller [Enabled] ..................................................... 33
Launch PXE OpROM policy [Legacy only] .................................... 33
Wake On LAN [Disabled] ............................................................. 33
Wake On Ring [Disabled]............................................................. 34
Wake On Time [Disabled]............................................................ 34
Wake On USB/PS2 (S3) [Enabled]................................................ 34
Wake On PCIe Slot [Disabled]...................................................... 34
Wake On LAN (S3) [Disabled] ...................................................... 34
Wake-on Modes .......................................................................... 35
RMT Button Display1 [Enabled] .................................................. 35
Display Output to COM [Disabled] .............................................. 35
Restore AC Power Loss [Power Off] ............................................ 35
Bootorder Menu [Enabled] ......................................................... 36
VT-d [Enabled]............................................................................. 36
Sub Menu CPU Configuration ...................................................... 37
Hyper-threading [Enabled].......................................................... 37
Active Processor Cores [All]......................................................... 37
Overclocking lock [Disabled] ....................................................... 38
Limit CPUID Maximum [Disabled] ............................................... 38
Execute Disable Bit [Enabled]...................................................... 38
Intel Virtualization Technology [Enabled] ................................... 38

Hardware Prefetcher [Enabled]...................................................38
Adjacent Cache Line Prefetch [Enabled]......................................38
CPU AES * [Enabled] ....................................................................39
Boot performance mode [Max Non-Turbo Performance]...........39
EIST [Enabled] ..........................................................................39
Intel TXT (LT) Support * [Disabled] ..............................................39
Sub Menu SATA Configuration.....................................................40
SATA Controller(s) [Enabled] .......................................................40
SATA Mode selection [AHCI] ....................................................... 40
SATA 0, 1, 5..................................................................................41
SATA 4..........................................................................................41
Sub Menu PCH-FW Configuration ................................................41
Intel ME (Management Engine) Subsystem ................................42
MEBx Type [None]....................................................................... 42
MDES BIOS State Code [Disabled] ...............................................42
Sub Menu AMT Configuration .....................................................43
Intel AMT [Enabled]..................................................................... 43
BIOS Hotkey Pressed [Disabled] ..................................................43
MEBx Selection Screen [Disabled] ............................................... 44
Hide Un-Configure ME Confirmation [Disabled] .........................44
MEBx Debug Message Output [Disabled]....................................44
Un-Configure ME [Disabled]........................................................44
AMT Wait Timer 0........................................................................ 44
Disable ME [Disabled].................................................................. 44
ASF [Enabled] ..........................................................................44
Activate Remote Assistance Process [Disabled] .......................... 44
USB Configure [Disabled].............................................................44
PET Progress [Enabled]................................................................ 44
WatchDog [Disabled]...................................................................45
Sub Menu USB Configuration.......................................................45
Legacy USB Support [Enabled].....................................................46
USB3.0 Support [Enabled] ...........................................................46
XHCI Hand-off [Enabled].............................................................. 46
EHCI Hand-off [Enabled] ..............................................................46
XHCI Mode [Auto]........................................................................ 46
USB Ports Per-Port Disable Control [Disabled]............................ 46
USB Mass Storage Driver Support [Enabled]...............................46
PORT 60/64 Emulation [Enabled] ................................................46
Device Power-up delay [Auto].....................................................47
Sub Menu NTC6106D Super IO Configuration .............................47

Sub Menu NTC6106D Super IO Configuration Parallel Port
Configuration............................................................................... 47
Sub Menu NTC6106D H/W Monitor ............................................ 48
Sub Menu Intel TXT Information.................................................. 49
Sub Menu Serial Port Console Redirection .................................. 49
Console Redirection [Enabled]................................................. 49
Sub Menu Serial Port Console Redirection Console Redirection
Settings........................................................................................ 50
Sub Menu Network Stack Configuration ..................................... 51
Sub Menu CMOS.......................................................................... 51
Sub Menu Intel(R) Ethernet Network Connection....................... 52
Sub Menu Intel(R) Ethernet Network Connection NIC Configuration
..................................................................................................... 52
Chipset Menu................................................................................... 53
Sub Menu PCH-IO Configuration............................................. 53
Sub Menu PCH-IO Configuration BIOS Security Configuration53
Sub Menu System Agent (SA) Configuration ............................... 54
Sub Menu System Agent (SA) Configuration Graphics Configuration
..................................................................................................... 54
Boot Menu ....................................................................................... 56
Bootup NumLock State [On]........................................................ 57
Quiet Boot [Disabled] .................................................................. 57
Fast Boot [Disabled] .................................................................... 57
Boot mode select [LEGACY]......................................................... 57
Fixed Boot Order Priorities ‘#n’ Boot Device............................... 57
Security Menu.................................................................................. 58
Administrator Password.............................................................. 58
Intrusion Detection [Disabled] .................................................... 58
Sub Menu Security Menu Secure Boot menu ..................... 59
Save & Exit Menu............................................................................. 60
Discard Changes and Exit ............................................................ 60
Save Changes and Reset.............................................................. 60
Discard Changes and Reset ......................................................... 60
Restore Defaults .......................................................................... 61
Boot Override .............................................................................. 61
Launch EFI Shell from File System Device ................................... 61
Test Points Codes............................................................................. 61
Checkpoint Ranges ...................................................................... 61
SEC Phase .................................................................................... 62
PEI Phase ..................................................................................... 62
PEI Beep Codes ............................................................................ 65

DXE Phase .................................................................................... 65
DXE Beep Codes...........................................................................68
Abbreviations...............................................................................69

We would like to know your opinion on this publication.
Please send us a copy of this page if you have any constructive criticism.
We would like to thank you in advance for your comments.
With kind regards,
Wincor Nixdorf International GmbH
Documentation R&D BLN
Wohlrabedamm 31
D-13629 Berlin
E-Mail: [e-mail]
Order No.: 010750266921B
Your opinion:

K1 and K2 POS Motherboard
User Manual
Edition May 2017

All brand and product names mentioned in this document are trademarks of
their respective owners.
Copyright © Wincor Nixdorf International GmbH, 2017
The re production, transmission or use of this document or its contents is not permitted without ex-
press authority. Offenders will be liable for damages. All rights, including rights created by patent
grant or registration of a utility model or design, are reserved. Delivery subject to availability; technical
modifications possible.