Shenzhen Winext Technology Co., Ltd.
9
3.Basic information
1）LAN IP: 192.168.3.1, DHCP server is enabled by default;
2）Web page default user: root; login password: WelcomeTo2018;
3）WAN open DHCP client by default, need to connect with router;
4）4G/LTE: Europe LTE, US 4G, support automatic dialing by default;
5）Wifi: 2.4GHz, AP mode, max transmit power:18dBm; WiFi hotspot：GW5000_+the end
6 characters of gateway ID; Password：gateway2018better
6）WAN and 4G network, priority in using the WAN traffic by default, 4G as a backup. When
WAN is not working, switch to 4G; Gateway needs to be able to get normal access to the internet,
network delay(ping lora.smartkit.io)less than 50ms, if using Ethernet, network speed should be
above 2M; If using 4G card, the monthly data access plan should be above 6G(it depends on the
nodes quantity)
7) The default file format of TFcard: FAT32, when the rest memory less than 2G, the oldest
log files will be cleared.
8）Support foreign server, e.g. TTN;
9）Support reporting status regularly（WAN, LTE, LoRa, WiFi, TF card）
10）Support reporting LoRa configuration parameter regularly;
11）Support remote reboot;
12）Support remote administrator login and maintenance;
13）Support button or WEB operation to restore factory setting;
14）For security reasons, root login SSH2 and serial port have been disabled, and the account
of login SSH2 and serial port is not open to the public.
4. Restore factory setting
If you’ve modified some parameters of gateway, andthe gateway won't work properly, there
are two methods to restore factory settings.
1) 1st method: press the reset button on the main board for more than 8 seconds(short press
will restart the system) , the reset button is as below:
