Winma W10FA3S-PCH2AC-PoE User manual

Please read these instructions carefully before using this product, and save this manual for future use.
10.1” S-Series HMI
W10FA3S-PCH2AC-PoE
W10FA3S-PCH2-PoE
Quick Start Guide
V1.1
For more information on this and other Winmate
products, please visit our website at:
www.winmate.com
Document Part Number: 9152100I0001

ii
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
class "B" digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the
Council directions.

iii
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted
in any form or by any means, electronic or mechanical, for any purpose, without
the prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order
to improve design and/or performance. We assume no responsibility or liability
for the use of the described product(s) conveys no license or title under any
patent, copyright, or masks work rights to these products, and make no
representations or warranties that these products are free from patent, copyright,
or mask work right infringement, unless otherwise specified. Applications that
are described in this manual are for illustration purposes only. We make no
representation or guarantee that such application will be suitable for the
specified use without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from
material and workmanship defects for a period of one year from the invoice date.
If the customer discovers a defect, we will, at his/her option, repair or replace the
defective product at no charge to the customer, provide it is returned during the
warranty period of one year, with transportation charges prepaid. The returned
product must be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by over 30
days, the in-warranty service will be made according to the shipping date. In the
serial numbers the third and fourth two digits give the year of manufacture, and
the fifth digit means the month (e. g., with A for October, B for November and C
for December).
For example, the serial number 1W14Axxxxxxxx means October of year 2014.

iv
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product.
Second, contact with your distributor, sales representative, or our customer
service center for technical support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business
day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques
sensibles peuvent être endommagées par des sauts d’alimentation.
Seulement du personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements
électroniques moderns sont très sensibles aux décharges
d’électricité statique. Toujours utiliser un bracelet de mise à la
terre comme précaution. Placer toutes les composantes
électroniques sur une surface conçue pour dissiper les charge, ou
dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

v
CONTENTS
INTRODUCTION 1
Features 1
Package Contents 2
Description of Parts 4
GETTING STARTED 5
Turning On Your Device 5
Configuring Serial Port Settings 6
Brightness Adjustment 8
Operating the HMI Device 9
Setting up the Device 9
Home Screen 9
Quick Settings 10
Ethernet 11
Configuring Ethernet 12
Configuring Ethernet 12
Testing LED Status Light Bar 13
Reading NFC Tag 14
Using Front Camera 16
The Camera Menu 16
Shooting Photos 17
Making Videos 19
Shooting Panoramic Images 19
Winmate® Home Manager (WHM) 20
How to Lock Applications 20
How to Unlock Applications 23
How to Change Password 24
Turning Off Your Device 24
INSTALLATION 25

vi
Wiring Requirements 25
Connecting to Other Devices 26
Power Input Connector 26
Serial Port Connector 26
USB 2.0 Connector 26
Ethernet Connector 27
USB OTG Connector 27
Micro SD Card Slot 27
Mounting 28
Panel Mounting 28
VESA Mounting 29
Front Side Wall Mounting 33
SPECIFICATIONS 35
HMI Device Specifications 35
NFC Tag Support 37
APPENDIX 38
Appendix A: Cleaning the Monitor 38
Appendix B: Winmate Software Development Kit 39

1
INTRODUCTION
Congratulations on purchasing Winmate® 10.1” S-Series HMI. Interactive and
smart automation systems of intelligent buildings are in a fast growing phase.
Winmate multi-touch S-Series HMI is suitable for home automation and room
management systems. Flat surface is easy-to-clean and delivers aesthetically
pleasing look for any interior. By connecting to centralized database, it can
provide real time update for booking status and available schedule, or perform as
a synchronous display in meetings. Optional NFC is especially useful in access
control applications.
S-Series HMI runs on Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (optional
Quad Core) processor and support Android, Linux Kernel or Ubuntu operating
systems. The HMI device features P-Cap touch-screen. These models designed
with front IP 65 dust and water proof, and IP22 on the back side.
S-Series HMI has an exceptional feature - LED light bar. With the help of red,
green and blue LED indicators you can see the status of the machine or
processes afar. It significantly reduces power consumption by keeping the
display turned off.
Features
Winmate® 10.1” S-Series HMI features:
10.1'' 1280 x 800 Resolution with P-Cap multi-touch screen
Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (optional Quad Core)
Android, Linux Kernel or Ubuntu OS
PoE standard IEEE 802.3at (25 W)
Fanless cooling system and ultra-low power consumption
Room booking schedule, access control, room information display
Front IP65 water and dust proof
LED Status Light Bar indicators on both sides
Optional NFC Reader
Optional 2MP Front Camera

2
Package Contents
Carefully remove the box and unpack your device. Please check if all the
items listed below are inside your package. If any of these items are missing
or damaged contact us immediately.
Standard factory shipment list
10.1” HMI Device
Quick Start Guide
(Hardcopy)
Driver CD & User
Manual
Varies by product
specifications
9152100I0001
9171111I102P
AC Adapter
(12V/ 50W)
Power Cord
Terminal Block 2 pin
922D050W12VA
Varies by country
94J602G020K0
External USB A
Type to Micro USB
Cable
9487049050K0

3
Package may include optional accessories based on your order:
VESA Desk Stand
PCVS-V1
VESA Desk Stand
LA-100
VESA Wall Mount
Bracket
LA-106
99KK00A0000E
9B0000000128
9B0000000412
Front Side Wall Mount
PCFW-V1
99KK00A0000C

4
Description of Parts
Unit: mm
№
Description
№
Description
①
Console Port (for Linux)
⑥
USB 2.0 x 1
②
Micro SD Card Slot
⑦
12V DC
③
LAN/ PoE*
⑧
2MP Front Camera (Optional)
④
USB OTG
⑨
LED Status Light Bar**
⑤
RS-232/422/485
⑩
1W Speaker
** Power Device (PD): IEEE 802.3at (25 W), IEEE 802.3af (15 W)
*RGB LED light bar only available for the model number W10FA3S-PCH2AC-
PoE.

5
GETTING STARTED
Turning On Your Device
Follow the following steps to turn on your device:
1. Connect the HMI device to a thermal block (2-pin).
2. Connect the other side of the thermal block to the AC adapter.
3. Connect the AC adapter to the power cord.
4. Plug in the power cord to a working AC wall outlet. The device will boot
automatically.
CAUTION
Use only the AC adapter included in your package
(Rating: Output 4.2 A). Using other AC adapters may damage
the device.
ALTERNATING CURRENT
This product must be grounded. Use only a grounded AC outlet.
Install the additional PE ground wire if the local installation
regulations require it.

6
Configuring Serial Port Settings
Serial COM Port can be configured for RS-232, RS-422 or RS-485. Winmate
provide COM port settings application for Android OS.
To configure serial port settings:
1. Go to Settings > Accessibility.
2. Go to Accessibility > Comport-Setting.

7
3. Go to Comport-Setting > Comport 1/ Comport 2/ Comport 3
* Select Comport 1/ Comport 2/ Comport 3 that you want to configure.
4. In COM port settings select Comport 1 > RS232/RS422/RS485
*This example shows how to configure Comport 1 settings

8
Brightness Adjustment
Use can adjust the screen brightness in Android settings. Pull down from the top
of the screen to get the notifications area. You can also access display settings in
the settings menu.
To adjust the brightness of the screen:
Go to Settings > Display > Brightness
Tap the cursor to the left to reduce the screen brightness.
Tap the cursor to the right to increase the screen brightness.

9
Operating the HMI Device
Winmate® 10.1” S-Series HMI runs on Android 4.4 OS (Default).
Setting up the Device
When you first turn on your HMI device, you will see a Welcome screen. Choose
the language you want and touch Start or the Start icon. When prompted, you
can sign in with your Google Account to create one at that time. You can also
choose to skip this step and create one later.
Home Screen
Back
Opens the previous screen you were working in. Once you back up to
the Home screen, you can’t go back any further.
Home
Opens the central Home screen. To open Google Now, swipe up.
Recent Apps
Opens a list of thumbnail images of apps you’ve worked with recently.
To open an app, touch it. To remove a thumbnail from the list, swipe it
left or right.

10
Quick Settings
To open Settings, Swipe down from the top right of the screen and touch the
Settings icon.
NOTE
You can open your device’s Settings app from the All Apps screen
or from Quick Settings. For example, to change notification
sounds, and volume go to Settings > Device > Sound to change
the volume.

11
Ethernet
1. Connect Ethernet Cable to the HMI device.
2. Go to APPS > Ethernet .
3. Ethernet APP main menu appears
Setting
Description
Check Ethernet
Check Ethernet connection parameters: IP mode, IP
address, DNS address and others
Configure Ethernet
Enable Ethernet connection and configure its such
as connection type
Advanced Settings
Configure advanced parameters of the Ethernet

12
Configuring Ethernet
To configure Ethernet settings go to Apps > Ethernet > Configure Ethernet.
*Default settings: Ethernet OFF. Swipe Ethernet ON to activate Ethernet connection.
Connection Type
Setting
Description
DHCP
The device automatically capture IP-address from the router
Static IP
Allows to manually set up IP-address, DNS, Network and
Gateway
Configuring Ethernet
To check the Ethernet settings go to APPS > Ethernet > Check Ethernet
Ethernet settings menu appears on the top right side of the desktop.

13
Testing LED Status Light Bar
Notice that LED Status Light Bar is a default feature for 10.1” S-Series HMI
W10FA3S-PCH2AC-PoE.
This application is for demonstration purposes only.
To test LED Light Bar go to APPS > Light BarDemo .
Adjust the intensity of Red, Green and Blue light.

14
Reading NFC Tag
Notice that NFC Reader is an optional feature for 10.1” S-Series HMI and may
not be present in your device.
Refer to Appendix A of this user manual for more details of supported NFC card
type.
Follow instructions below to test NFC feature.
Step 1 Go to all APPS menu, open NFC Tag Info application .
Step 2 User needs to turn the NFC on. If the NFC is
off, click on the screen to change NFC & wireless
settings.
Step 3 The NFC Tag Info application opens
Wireless & network settings. In NFC menu slide
the bar to the right to turn on the NFC.