Winter Wonder Lane XL3211074 Use and care manual

Stacked Gnome
Operation and Safety Instructions
- FOR INDOOR AND OUTDOOR USE –

PARTS:
Part
Description
Illustration
Qty
A
Base
1
B
Gnome A
1
C
Arms A
2
D
Tree
1
E
Hat A
1
F
Gnome B
1
G
Arms B
2
H
Hat B
1
I
Gnome C
1

J
Arms C
2
K
Hat C
1
L
Plastic Ties
16
M
Ground Stakes
4
To Assemble
1. Remove all the parts from the box carefully and lay out the components.
2. Insert the prongs of the Base and GnomeA into the corresponding rings of each other.
3. Insert the prongs on the Arms A into the corresponding rings on the GnomeA.
4. Insert the prong of the Tree into the corresponding ring onArmsA.

5. Insert the prongs of the HatA into the corresponding rings on the GnomeA.
6. Insert the prongs of Gnome B into the corresponding rings on the HatA.
7. Insert the prongs on the Arms B into the corresponding rings on the Gnome B.

8. Insert the prongs of the Hat B into the corresponding rings on the Gnome B.
9. Insert the prongs of Gnome C into the corresponding rings on the Hat B
.
10. Insert the prongs on the Arms C into the corresponding rings on the Gnome C.

11. Insert the prongs of the Hat C into the corresponding rings on the Gnome C.
12. Secure the installing points with plastic ties and secure the base to the soft ground by fully
inserting 4 stakes into the ground.
To Use
1. Connect the lighting of 3 gnomes together with End connectors. To illuminate, plug the power
cord into a standard 120-volt AC electrical outlet.

2. To shut off, unplug the power cord from the outlet.
WARNING: To reduce the risk of fire or electric shock, if one or more bulbs do not illuminate,
replace the bulb(s) according to the "User Servicing Instructions" section of the included
"Important Safety Instructions" sheet.
Distributed By:
Big Lots Stores, Inc.
PO Box 28523
Columbus, OH
43228-0523