Winy technology V300HD User manual

V300HD User Manual
WINY Technology Co., Ltd.
Ver. 02
http://winycam-eng.com

Contents
# Precautions
- Precautions for safety when using the product 3p
- Precautions when using a SD card 4p
- Precautions when using a Battery 5p
1. Package 6p
2. Product Features 7p
3. Function 8p
4. How to Install 9p
5. How to Record 10p
6. LED Operation Guide 11p
7. Voice Guide 12p
8. How to Install Original Viewer Program 13p
9. Original Viewer - Screen Configuration 14-15p
9-1. Original Viewer – Viewer Setup 16-17p
9-2. Original Viewer – Configuration 18-19p
9-4. Configuration Default Settings 20p
10. Play and set the configuration by smartphone 21p
11. Firmware Update 22p
12. SD card Format 22p
13. Specification 23p
14. Recordable Time 23p
# Warranty 24p

Precautions for safety when using the product
1. Please do not operate the product during driving. It may cause accidents.
2. Please install the product in a place not to interfere with a driver's view.
3. Do not disassemble or convert the product intentionally. It may lead to product failure and the responsibility for the damage to the product resulting from this
shall be borne by the user.
4. When damage to the product itself occurs due to a major accident or the power is disconnected, images of the accident may not be recorded.
5. Please keep the windshield clean at portion of recording before recording.
6. Since this product is a device that records a driving video by using the camera, the image quality may drop when entering the tunnel, in shading contrast,
backlight and photometric conditions, and the middle of the night.
7. In case those foreign objects attach to camera lens, recorded video may not be in good condition. Please keep the lens clean.
8. Do not leave a product in a place exposed to the direct sunlight in a car or in a confined car. It may cause a malfunction.
9. Do not wipe the product using chemicals, detergents, etc., but wipe it lightly using a soft cloth.
10. The thermal environment at below -5℃ or over 55℃ may cause a malfunction or failure of the product. (When not using the product, please be careful about
storage temperature)
11. Do not use the product in a place at high temperature or much moisture.
12. Do not press excessive force to the products (especially buttons and bracket). It may cause a malfunction of the products.
13. Before using the product, make sure to operate it for 3 to 5 minutes and verify that the image saved properly and then use it.
14. If the product is in prolonged exposure to sunlight or high temperatures during the summer, normal operation can be difficult.
15. When firmware upgrade is in progress, if SD card is removed or a power is disconnected, failure of the product may occur, so should be careful.
16. When removing or disconnecting the cigarette lighter cable, it may result in electric shock, so do not touch it with wet hands.
17. Do not use the damaged cigarette lighter cable. It may cause fire and electrical shock.
18. Do not leave the cigarette lighter cable or the product near heating equipment.
19. When not using the product for the long-term, please separate off the cigarette lighter cable from the product.
20. Please plug the cigarette lighter cable correctly and should not be shaken.
21. Do not bend or pull the cigarette lighter cable forcefully or avoid placing heavy objects on the cigarette lighter cable. (A damaged power cord may cause fire
or electric shock)
22. Even if overwrite function is in ‘Off’ condition, a part of recorded file may be deleted to create some recording space at booting.
23. In the lower frame setup, the event may not be recorded. For the stable event recording, recording setup is greater than or equal to 15 frames is
recommended.

1. In order to confirm normal operation of the product, please check the image of a SD card and format it on a regular basis.
(PC format needed one to two times per month)
2. Because an SD card is consumables, if it is used for a long time, you may lose the data or may not record due to an error, so please
check it periodically.
3. When the product is in recording or the power is on, do not eject the SD card forcibly. It may cause a failure of the SD card and data
loss.
4. Due to excessive temperature rise inside the car, the data may not be saved or get damaged, so please park the car in a cool place in
the summer.
5. When identify the car's accident or damage, please keep the SD card separately. Due to overwrite, important data may be deleted.
6. When turn off the power of the body and remove the SD card before LED is turned off, the last recording file may not be saved, so
please be careful.
7 In general, the SD card is a consumable product in life, so if it is not used for a long time, you may not be able to save the data. In this
case, buy a new SD card and use it, and please always check that the recorded images and a SD card have no problems with data storage.
8. When driving a car, do not remove the SD card. Make sure to remove it safely when a car is in parking or stop.
9. After turning on the power, make sure that it is in normal operation.
10. Please note that the warranty period of an SD card is six months, and replace it at the time of more than six months.
11. The SD card randomly purchased other than the one we provide, shall be excluded from the warranty, and we shall not take any
responsibility for loss and damage of the data recorded in the SD card in any case.
12. After check playback recorded video on a Smartphone (support an Android only), remove the SD Card and follow below.
Menu → Configuration → System → Mode change space → SD Card un-mounting
(if you do not "SD Card un-mounting“, SD Card might be damaged.)
Precautions when using a SD card
# This product is assistant device for recoding driving video.
Please use this product for your reference for checking driving video,
not as special CCTV because the image might not be record depend on environment.
# This product might change without any notice for performance improvement.
# This user manual indicate only basic user manual, please check furthermore detail information from http://winycam-eng.com

※ Please follow below otherwise Heat Generate, Fire, Explosion, etc might happen.
1. Contact the manufacture or distributor if battery bellowed up even by the naked eye.
2. Use only packaged battery and do not modify and disassemble.
3. Never put this built-in battery product close to fire.
4. Do not leave product for long time inside the car in summer.
5. Use Warranted lithium polymer portable charger by manufacture.
6. Do not disassemble, crimp, destroy.
7. Do not drop from high location and give shock to product.
8. Do not leave product in location that is over 60˚C.
9. Do not leave a product in the humid location.
# Do not throw away a used battery.
# When disposing of a battery, do not burn and put them in a fire. (Due to heat, it may cause an explosion or fire.)
# Battery disposal may vary by country and region. (Please dispose it properly).
※ Battery Disposal Instructions
Precautions when using a Battery

Body & Bracket
Video Cable
(Selling separately)
1. Package
Package
Option Accessory
The viewer program is stored in Micro SD card.
Please use after saving the program in advance in the computer, etc. so that the program can’t be deleted.
(If it is deleted, you can download it from our website.)
The packaged product picture of the user manual may differ from the actual product.
Video cable is used for connection to the TV / car navigation, and can monitor real-time. But please note that depend on monitors,
Video input type is different and check the user manual of monitor.
Car Cigar jack Micro SD card Card Reader User Manual
Cabling Clip 3pcs
Package
GPS Bracket
(Selling separately)

1. 2 Mega Pixel image sensor mounting.
2. 150 degrees (based on lens) wide mega lens (based on actual recorded video) are applied.
3. HD (1280X720) resolution and 30FPS are supported.
4. Security LED light are mounted on front body (LED Lighting function On/Off can be set in PC viewer)
5. Car constant power discharge protection function (setup is available in PC viewer) is built-in. Separated power
discharge safety equipment is not necessary.
6. G sensor built-in Automatic parking recording mode change and event recording mode.
7. Various recording functions - normal, manual, event, motion, automatic parking recording mode change.
8. Operating instructions service by voice guidance.
9. External video output. (real-time video image can be checked)
10. Soft look and emotional design. (easy removable body)
11. Driving records can be stored with GPS data. (optional)
12. PC viewer software are provided to change various setting values and map data can be checked when using GPS. (In
the general video player (e.g. Windows media player), recorded video can be played)
13. High performance microphone built-in
14. Back-up battery built-in (safety backup power support)
15. Memory back-up is available by flash memory, even in the error occurred when firmware is in upgrade.
16. When car constant power discharge functions in setup, the dark current of less than 2mA is consumed. (based on
12V)
17. SD card can be formatted as the product itself, without connecting to a PC.
18.
When using car constant power discharge protection functions, If user car voltage is 12V and the voltage of less than
11.8V is maintained for more than 30 seconds the product power will be shuts-off. In case user car is 24V, power will
be shut down after 30min with less than 24V. (Note: Shutdown time depend on the Type of Car and car condition.)
19. Voice recording On/Off function and speaker output On/Off function.
20. Each capacity of normal/ event/ motion folder can be set in PC Viewer.
21. Recording image resolution can be set to change. (HD/D1/VGA)
2. Product Features

3. Function
1. Bracket (GPS Bracket: Selling separately) 8. Microphone
2. Up-down adjustment screw 9. Record LED
3. Security LED 10. Power LED
4. Camera Lens 11. Speaker
5. GPS Connection 12. Record Button (for manual)
6. External Video Cable(Selling separately) 13. Micro SD card Slot
7. Power Input

4. How to Install
Remove protective sticker on the
double-sided tape of the bracket.
Clean foreign substance in a place
to attach the product first and
attach the product.
Connect packaged cigar adapter
to the power connecting terminal.
The picture after installed
Connect cigar jack to the car cigar
socket.
Insert the Micro SD card into the
product. (Note the direction of
the SD terminal)

Recording
mode
Recording
method
Auto recording
method
Manual
recording
method
(button
control)
Recording time Recording
folder
Driving
recording
mode
Normal
recording - - Set on configuration
30 / 60 / 120 sec Normal
Event
recording In G-sensor detect Shock One short press
button Each 15
second
recording
before and
after event or
motion
occurrence
* For HD highest
quality resolution
only,
each 15 second
recording before
and after event
or motion
occurrence
Event
Parking
(motion)
recording
mode
Motion
recording
In G-Sensor is not
detected for more than 8
minutes Automatic
motion recording mode
change
3 second long
press button Motion
Event
recording In G-sensor detect Shock One short press
button Event
5. How to record
1. Recording: V300HD is automatically booted at power on, and recording starts in basic normal recording mode.
2. Recording Mode: it is classified into driving recording mode and parking (motion) recording mode
3. Recording Method: it is classified into normal recording, event recording, motion recording.
※ For automatic recording and manual recording methods, please refer the below table.
※ after change to parking recording mode by manual, if you want to change normal recording mode again, please press “REC” button for
3 seconds (during event recording, mode cannot be changed.)
※ Even if power is interrupted during event recording mode, 30 second can be recorded completely before power is off.
(Only if built-in battery is fully charged)
※ If event (G-sensor detection and manual recording by button control) occurs during motion recording mode,
After motion recording mode will be completed, the motion recording file will be changed into event recording files, and event recording
mode will start immediately.

6. LED Operation Guide
Situation Front LED Operation
Rear LED
REC LED
Power LED
Car Constant Power
Discharge Protection Off
Car Constant Power
Discharge Protection On
OFF GPS Connect ON GPS Connect
Booting Off Red lighting Red flashing
Firmware update Off Orange flashing
(Green/Red)
Orange flashing
(Green/Red)
Normal recording
mode start
All flashing
Green flashing
Green
lighting
Green
flashing
Orange
lighting
(Green/Red)
Orange
flashing
(Green/Red)
Event recording mode
standby Green lighting
Event recording mode
start left and right LED and
central LED cross-flashing
Red flashing
Motion/Parking on
Event recording
Orange flashing
(Green/Red)
Motion/Parking
recording start
Reciprocation flashing left
and right
Orange flashing
(Green/Red)
Motion/Parking
recording standby
Orange lighting
(Green/Red)
No SD Card (Error) Off Off Orange flashing
(Green/Red)
ETC Off Off Off
When no GPS signal or depend on GPS signal receiving location and signal condition, LED display only lightning.

Situation Voice Guide
Event / Motion Occur (Alarm Tone) “Ding-Dong”
Remove SD card / SD card Error “Please check a SD card.”
Firmware Update Start “Firmware will be updated.”
Firmware Update Completed “Firmware update has been completed.”
Normal Recording Mode Start “Normal recording will start.”
* Event Recording Mode Start “Event recording will start.”
Parking Recording Mode Start “Parking recording will start.”
Recording End “Recording will be end.”
Change the Date / Time setting “Setting has been changed.”
Automatically change to
Normal Recording Mode “SD card capacity is full. Normal recording will start”
SD card Format “Will you format your SD card?”
7. Voice Guide
* Only when event recording mode is set in the configuration, the voice guiding "event recording will start" will announce.

1. System Requirements
- Windows XP(32bit), Windows Vista(32bit), Window7(32/64)
- Pentium 4 2.8GHz & RAM 1GB .
- 1024 * 768 Display device is set to be the primary monitor.
- DirectX Support (WPF)
2. Install
- Playback program is in packaged SD card.
- Insert this SD card into the USB card reader and connect to the computer.
- An executable file is in the SD card as below figure.
- If you run “setup.exe”, Winy BB Viewer will be installed. And then, installation will be
continued according to the installation sequence of setup dialog box.
Next >
Select
installation
Folder
Next > Next >
Installing > Installation Complete- Close
1 2 3
4 5
8. How to Install Original Viewer Program
* Click “Cancel” to stop installation.

①
② ③ ④⑤ ⑥ ⑦ ⑧⑨
⑩⑪
⑫
⑬
⑭⑮⑯⑰⑱⑲⑳㉑㉒㉓
24 25 26 27 28
㉔ ㉕ ㉖ ㉗
㉘
9. Original Viewer – Screen Configuration

1[1Ch], [2Ch] Select channel and it will playback. 15 Flip Vertical
2Viewer Configuration 16 File Skip Back
3System Configuration 17 Fast-forward (5sec)
4Print 18 Playback or Pause
5Screen Capture 19 Stop
6Zoom 20 Fast-Rewind (5sec)
7Play list/Map Button 21 File Skip
8Find File Location 22 Control playback speed/ Control Volume
9N: Normal Record/E: Event Record/P: Motion Record 23 Total File Time/Playback Time
10 Playback Display 24 Brightness/Contrast/Chroma
11 Playback list/Map Display 25 GPS signal condition
12 Playback Control 26 Driving speed
13 Full Screen 27 Latitude/Longitude
14 Flip Horizontal 28 G-sensor information
9. Original Viewer – Screen Configuration

9-1. Original Viewer – Viewer Setup

Item Description
JPEG stores location Set location for captured JPEG image.
Language Select language.
Playback mode Select display channel.
Repeat Select repeated playback.
App Location Select App is always the top of another window.
Video Reverse Select video reverse.
Device Select Select the model.
Video Adjustment Control Brightness/Contrast/Chroma.
Volume Control recording volume level.
9-1. Original Viewer – Viewer Setup

9-1. Original Viewer – Configuration

Item Description
Mode Setup Selects normal recording mode or event recording mode when driving, and while event recording is set, the data by event recording mode
will be stored. (Default: Normal mode)
Driving Mode Frame Rate Sets the frame rate for driving. (Default: 30F) the higher frame rate is set, the movement image will be saved more smoothly.
Time Setting Sets the current your time. when setting time in PC, please add travel time between the location you set time on PC and the location you
apply set time to black box in a car. (PC -> Travel time -> Car). (When using GPS bracket, time setting will be automatically applied.)
Resolution Sets the size of image resolution. HD 1280*720 (Default) / D1 720*480 / VGA 640*480
Parking Mode Frame Rate Sets the frame rate when parking (Default: 15F)
Set Time? The time set in [Time Setting] will be applied to black box. Only when changing the time set, select "Yes". (Default: No)
Normal Recording Time 30 seconds / 1 minute (default) / 2 minute. You can set recording time.
Parking Recording Mode Change If there is no detection on G-sensor for over a certain time (approximately 8 minutes), it will be automatically switched to parking recording
mode, but if any detection on G-sensor for over a certain time (about 10 seconds), it will be automatically switched to driving recording mode.
LED Lightning Setting Sets the front LED display or not.
Video Quality Sets the quality of recording images.
Voice Guide Volume Level Sets volume level for voice guide.
Motion Sensitivity Sets the sensitivity level of motion detection sensor.
G-Sensor Sensitivity Sets the sensitivity level of shock detection sensor.
Recording Volume Level Sets the volume level of the recording voice.
Overwrite Function(Event/Motion) Deletes the oldest data and sets to overwrite them with a new file.
Car Constant Power Discharge
Protection
No Use: no use this function
Unlimited time use: when a power voltage keep below voltage value for 30 sec, power will off automatically.
Value of cut off voltage :(12V car standard voltage: 11.8V±0.3V, 24V car standard voltage : 24V±0.5V)
After power off by this function, recording will start if voltage will be over below value.
Voltage to start power :(12V car standard: 12.5V±0.2V, 24V car standard: 25.5V ±0.5V)
2/4/8/12/24/36/48 time setup : After change parking mode, a recording can keep until setup time. After passed
setup time, if a voltage is under a value of cut off voltage, power will off.
SD card Folder Capacity Adjustment Adjusts storage space ratio by recording folder in the entire SD card storage capacity.
9-2. Original Viewer – Configuration

9-3. Configuration Default Settings
Item Settings Item Settings
Mode Setup Normal Driving mode Frame Rate 30
Resolution HD (1280 x 720) Parking Mode Frame Rate 15
Time Setting The time setting value
on PC will be output. Set Time? No
Normal Recording
Time 1 Minute Parking Recording Mode
Change Off
LED Lightning Setting On Video Quality High-Quality
Voice Guide Volume
Level 2Motion Sensitivity Normal
G-Sensor Sensitivity Normal Recording Volume Level 2
Overwrite
(Event/Motion) On Car Constant Power
Discharge Protection Off
Camera Sensor
Contrast Middle
Brightness Middle
Color Middle
SD card Folder
Capacity Adjustment
(All 20 Cells)
Movie 10 Cells
Motion 4 Cells
Event 6 Cells
Other manuals for V300HD
1
Table of contents
Other Winy technology Dashcam manuals