Wolfee Presenter+ User manual

www.wolfeetechnologies.com
Wolfee Presenter+ User Guide
Welcome To the future of presentations!
Wolfee Presenter+, a CES 2019 Innovation Awards Honoree*, gives you full control while speaking,
making it extremely easy for you to play/pause videos, control volumes, open hyperlinks, play
interactive contents while on stage, on top of traditional presenter functions such as click
forward/backward and laser pointer. Moreover, you can now deliver your presentations from
smartphones, as well as laptops and MacBooks. Integrated with full mouse functions, Wolfee
Presenter+ can also be used as a remote mouse, making consuming digital contents from any of your
computing devices on immersive displays an unrivaled experience. For all these amazing features,
there is no need to install any app or software.
*：The CES Innovation Awards are based upon descriptive materials submitted to the judges. CTA did not verify the accuracy of any
submission or of any claims made and did not test the item to which the award was given.
Safety Warning!
Laser beam can cause permanent eye damage. To avoid unnecessary risks:
 Do not look into the laser beam.
 Do not point the presenter’s laser at people.
 Do not shine the laser beam into people’s eyes or animal’s eyes.
 Do not beam laser at a mirror or through optical devices which may cause eye damage for
people on the other end.
 Keep the presenter away from children.
Package Contents
 Wolfee Presenter+
 80 cm/31.5” (approx.) Micro USB charge cable
 User Guide

www.wolfeetechnologies.com
Device Illustration
Specifications
Model Colo
r
Black/White/Space Gre
y
Lase
r
Colo
r
Green
Wireless Technolo
gy
Bluetooth Low Ener
gy
(
BLE
)
Char
g
e Port Micro USB
Batter
y
T
y
pe Lithium
Batter
y
Capacit
y
500mah
Dimensions 119x46x32mm/4.69”x1.81”x1.26”
(
approx.
)
Wei
g
ht 71
g
/2.5oz
Effective Distance up to 30m/100ft

www.wolfeetechnologies.com
OS Compatibility
• Windows 10 or later
• Mac OS X 10.10 or later
• Android 5.0 or later
• Linux 3.19 or later
For iOS devices, iPhone 6/6+ or later, iPad Air 2 or later can pair with Wolfee Presenter+, but can
only utilize basic presentation functions such as black screen, slide forward/backward, laser etc. This
is due to the fact that iOS disallows cursor control.
Charge Presenter+
Wolfee Presenter+ comes with a non-replaceable Lithium battery that can be charged through the
Micro USB port on the tail of the device. For 5-hour everyday usage, the presenter lasts more than a
week on a single full charge. It takes less than two hours to fully charge the device. If the presenter is
stowed away with the On/Off Switch set to Off, it can last several months. Please use the Micro USB
cable provided in the package to charge the presenter.
During charging, if the power switch is set to Off, the LED indicator is turned off, but the device is still
being charged. You can easily check charging status by turning it on. If the power switch is on, the
LED indicator will slowly blink. It will turn solid Blue/Green (depending on its current operation mode)
when fully charged.
For more information on the LED indicator and its color coding, please see section "LED Indicator".
Pair with Computers/Smartphones
Wolfee Presenter+ can pair with computing devices supporting Bluetooth Low Energy (BLE), such as
PCs, laptops, MacBooks, Smartphones, tablets etc. Please refer to each computing device for its
Bluetooth pairing procedure.
Section "OS Compatibility” has more details on compatible Operating Systems.
Function Mapping
Wolfee Presenter+ can operate in either of these two modes: Presenter Mode, Browser Mode.
Presenter Mode is optimized for users to make presentations, while Browser Mode for easy
navigation of remotely controlled computing devices.

www.wolfeetechnologies.com
Full-fledged mouse functions are available in both modes, through usage of the mouse left button, the
mouse right button, and the touch surface.
Single-click on Mouse Left Button (Seen in Device Illustration) is equivalent to a Mouse Left Click.
Single-click on Mouse Right Button is mapped to a Mouse Right Click. But double-click on Mouse
Right Button is mapped to a Keyboard ESC key. This hot key is particularly useful when Wolfee
Presenter+ is used to control a mobile device, where buttons to exit apps are often not obviously
visible, many times even not available.
Double-click on Ring Button: Left is equivalent to the Keyboard TAB key. This is also very useful on a
mobile device where user may want to shift input focus.
The major differences between these two modes are functions of the top button, the four ring buttons,
and the LED Indicator.

www.wolfeetechnologies.com
The sequence to switch to Presenter Mode:
1. Switch is set to On;
2. Use one hand to press and hold Mouse Right Button;
3. Then use the other hand to press and hold Ring Button: Left;
4. Wait for 2 seconds;
5. Release Ring Button: Left;
6. Release Mouse Right Button;
7. LED Indicator will flash several times, then turns to Blue if the device has more than 30%
power, Magenta if > 10% and Red if <10%.

www.wolfeetechnologies.com
The sequence to switch to Browser Mode:
1. Switch is set to On;
2. Use one hand to press and hold Mouse Right Button;
3. Then use the other hand to press and hold Ring Button: Right;
4. Wait for 2 seconds;
5. Release Ring Button: Right;
6. Release Mouse Right Button;
7. LED Indicator will flash several times, then turns to Green if the device has more than 30%
power, Yellow if > 10% and Red if <10%.

www.wolfeetechnologies.com
Sleeper Mode and Wakeup
User can use On/Off Switch on Wolfee Presenter+ to turn on or off the device. When it is on and
connected to a host, LED indicator emits solid light, the presenter will be active for as long as the host
is active and connected with the presenter. When the switch is on but not connected to a host, the
presenter is in Discovery Mode, LED indicator blinks. In this case, the presenter will shut off power,
turn off LED indicator and enter Sleeper Mode after 3 minutes.
You can wake up a presenter from Sleeper Mode in two ways. One click on Top Button, or one click
on Mouse Left Button. The difference is, when use Mouse Left Button to wakeup the device, all stored
information on past bonded hosts are cleared.
Another way to bring the device out of Sleeper Mode is by toggling On/Off Switch. Effectively it is the
same as clicking on Top Button to wakeup, all bonding information is retained across power-ups.
Bonding information is stored when a new computing device is paired with the presenter, so they can
connect quickly the next time without repeating the pairing procedure. Wolfee Presenter+ stores up to
8 bonding peers, which allows a user to easily switch among various computing devices. In case a
user need to wipe the connection history clean, putting the presenter into Sleeper Mode then waking
it up with Mouse Left Button should work.
To force the presenter into Sleeper Mode:
1. Use one hand to press and hold the mouse right button;
2. Then use the other hand to press and hold Top Button;
3. Wait for 2 seconds;
4. Release Top Button;
5. Release Mouse Right Button;
6. LED Indicator will flash several times and turn off.
LED Indicator
LED Indicator conveys two types of information: connection status, and battery level. When the
device is in Bluetooth Discovery Mode, LED Indicator blinks every 2 seconds. When a connection is
made, it turns into solid light.
In Presenter Mode, when the battery level is above 30% of full capacity, LED Indicator emits Blue
light in Discovery Mode or connected. When the battery level is below 30% but above 10%, LED light
turns Magenta. Less than 10%, Red.

www.wolfeetechnologies.com
In Browser Mode, when the battery level is above 30% of full capacity, LED Indicator emits Green
light in Discovery Mode or connected. When the battery level is below 30% but above 10%, LED light
turns Yellow. Less than 10%, Red.
When LED Indicator is Red, the battery level is extremely low, user should stop using the device and
start charging immediately.
Control a PC/MacBook with Presenter+
With a traditional mouse, user uses his index finger to click on the left button, the middle finger for the
right button, the thumb & the ring finger to hold and move the mouse.
Wolfee Presenter+, on the other hand, is a handheld device. It does not need a flat surface to operate
on. A user can use the index finger to click on Mouse Left Button (Front of the device), the thumb for
Mouse Right Button (Small radio button in the middle), and the thumb on the touch surface for cursor
movement, and the other three fingers and the palm to hold the device.
Basic operations are described below:
For point-and-click action, slide thumb on touch surface to move cursor, then use index finger to click
Mouse Left Button.
For drag-and-drop action, press and hold Mouse Left Button with index finger, then slide thumb on
touch surface to move cursor. Once cursor is at the right location, retract index finger to release
Mouse Left Button.
Sequence for select-copy-and-paste:
1. Use thumb to move cursor to the right location;
2. Use index finger to click and hold Mouse Left Button, then move thumb to select;
3. Use thumb to click on Mouse Right Button to activate Context Menu, then move thumb in
the menu to choose Copy;
4. Move thumb once again to move cursor to the right location, click on Mouse Right Button
then select Paste.
Please visit wolfeetechnologies.com to find more Wolfee Presenter+ video tutorials.
Control a Smartphone/Tablet with Presenter+
One key difference between mobile devices and traditional computers is in user interaction. Instead of
mouse and keyboard, mobile devices employ touch signals as the main input source. When use
Wolfee Presenter+ to remotely control mobile devices, user needs to utilize buttons and touch surface
to emulate touch inputs.

www.wolfeetechnologies.com
One particularly new user action, swipe, needs closer examination. To perform an equivalent Up
Swipe with Wolfee Presenter+ from afar:
1. Use index finger to shortly hold Mouse Left Button;
2. At the same time, move thumb upward across Touch Surface;
3. Retract index finger to release Mouse Left Button the same time as thumb is off Touch
Surface.
Please visit wolfeetechnologies.com to find more video tutorials.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction
One Year Limited Warranty
1. Wolfee Technologies (hereafter shorten as Wolfee) warrants to the original purchaser that its
products are free from defects in materials and workmanship for up to one year starting purchase
date. This warranty is limited to defects, materials and workmanship only.
2. The benefits to the consumer given by the warranty are in addition to other rights and remedies of
the consumer under law in relation to the goods to which the warranty relates.
3. The warranty is provided by Wolfee. Please send warranty related emails to
[e-mail].

www.wolfeetechnologies.com
4. What the purchaser must do to qualify for claiming warranty:
- The purchaser must send an email to the above warranty mailbox;
- The purchaser must provide the purchaser’s name, email address for further contact,
business hours delivery address, the Wolfee model number on the product, date and place
of purchase with receipt for purchase validation if required, and describe the fault condition.
5. What Wolfee warranty services include:
- Wolfee will provide qualified purchaser with return information for the purchaser to send in
product for warranty inspection;
- If after inspection Wolfee finds the product is defective in materials or workmanship, Wolfee
shall replace (or repair) the defective product at the discretion of Wolfee and ship product
from Wolfee warehouse at its expense within seven business days (Monday to Friday
excluding public holidays) of receiving returned goods. If the product is no longer available,
Wolfee reserves the right to replace it with the nearest corresponding product of no lesser
quality;
- Wolfee will bear the cost of return delivery to the purchaser regardless of the inspection test
result. The purchaser must bear the cost of the delivery to Wolfee. There is no charge for
inspection.
6. Please note:
- Features and specifications of all Wolfee products are subject to change without
notification;
- In some instances, products presented for repair may be replaced by refurbished products
of the same type rather than being repaired. Refurbished parts may be used.