Woojer Vest 3 Series User manual

Woojer Vest Series 3™User Manual
What’s in the Box
•
•
•
•
Woojer Vest Mk. 3™
Woojer Vest Series 3™
USB-C cable
Power Delivery charger and outlet adapters
User manual
Overview
1. Power button
2. Power indicator
3. Bluetooth Headphones indicator
4. Bluetooth Source indicator
5. Volume Up button
6. Volume Down button
7. Volume indicator
8. Sensation Up button
9. Sensation Down button
10. Sensation indicator
11. Battery level / charging indicator
12. Multi-Channel input indicator
13. 3.5mm audio-in port
14. Digital USB-C input Port
15. Headphone output jack
16. Control unit
17. Front-left transducer
18. Front-right transducer
19. Back-left transducer
20. Back-right transducer
21. Side-left transducer
22. Side-right transducer
23. Rear Power Delivery charging port
Placeholder location for Vest Next
1 2
3 4
5 8
9
10
7
11
13
14
15
6

First time usage
Woojer app
Scan the following QR to install Woojer app on your mobile or browse to www.woojer.com/woojerapp
. Follow the onscreen instructions to set up your Woojer.
Woojer app lets you easily control your Woojer, pair it with other devices, update its firmware, fine-
tune your experience, get updates for content, special deals, news and much more. For the best
experience, it’s highly recommended to install Woojer app on your mobile.
Update your firmware
It’s very important that you update your Vest’s firmware to the latest available version. This makes
sure your Vest supports all up-to-date features and bugfixes. To update your Vest, run Woojer app and
follow the update instructions.
Find Content
Find amazing content, for great Woojer experience at www.woojer.com/content
Get Support
All current information about your Vest is to be found on our Support Portal at www.woojer.com/support. You
can also find there technical-related articles and videos to help you utilize and troubleshoot your Vest.
If you still need help, please contact us using Woojer app or through Woojer Support Portal.

Woojer Vest Mk. 3™LED Indicators ADD a table
Power Indicator (2)
Solid green –Vest is on, no audio source connected
Solid blue - Vest is on, audio source connected
Bluetooth Source Indicator (4)
Solid blue –Bluetooth audio source connected
Blue, slow blinking - Searching for a Bluetooth audio source
Red/blue, fast alternating blinking –Bluetooth Audio source pairing mode
Bluetooth Headphones Indicator (3)
Solid blue –Bluetooth headphones connected
Blue, slow blinking - Searching for Bluetooth headphones
Red/blue, fast alternating blinking –Bluetooth headphones pairing mode
Multi-Channel input Indicator (12)
Solid blue –Multi-channel input mode is active
Battery level / charging indicator (11)
Battery charge meter: Green –Yellow –Orange –Red –Blinking Red
Charging Your Vest
•Connect the provided charger to the rear Power Delivery charging port (23), using the included
USB-C cable. Before first use, fully-charge your Vest.
•Use only a 20V 1.5A Power Delivery charger to charger your Vest. Do not use a lower voltage
charger to charge your Vest.
•While charging, the LED indicator changes its color according to the battery level. Once fully
charged, it’ll show in solid green.
•Do not use the Vest while charging.
•Do not use the front USB port for charging. It is an input only port.

Gaming Console
•Connect your console’s
controller to the Vest’s
3.5mm audio-in port (13),
using an audio cable.
•Adjust the source volume
level
[diagram]
PC
•Connect your PC to the
Vest’s Digital USB-C input
Port (14) using the provided
USB-C cable.
•Set the Vest as the PC’s
default playing device
[diagram]
VR Headset
•Connect your VR headset to
the Vest’s 3.5mm audio-in
port (13), using an audio
cable.
•Adjust the source volume
level
Note: It’s not recommended to use
Bluetooth or USB-C cable to connect
your VR headset.
[diagram]
Bluetooth Source
Pair your Bluetooth source (e.g.: your mobile) with the
•Open WoojerApp and follow the pairing
instructions (recommended)
OR
•Make sure the Vest is turned off
•Press and hold the Power button (1) for 5
seconds. The Bluetooth Source Indicator (4)
will blink alternately with red and blue
•On your source device, enter Bluetooth
screen and locate the Woojer Vest Mk. 3.
•Pair and connect the Vest with your source
device.
[diagram]
Connecting to an Audio Source
Woojer Vest Mk. 3™ can be connected to various audio sources using either wired connection or
wireless Bluetooth. Choose the right diagram according to your hardware and follow the connection
instructions.
For other hardware types, or special hardware setups, please visit our support portal at
www.woojer.com/support

Connecting to Headphones
Woojer Vest Mk. 3™ can be connected to either wired or Bluetooth headset. When turning on, it will
first search for previously paired Bluetooth headset.
Note: For Bluetooth connection, we highly recommend using the Woojer app.
Bluetooth Headset Connection Manually (without Woojer app)
•To enter headset pairing mode, press and hold the Power button (1) and the Volume Up
button (5) for 5 seconds. The Bluetooth Headphones Indicator will blink alternately with red
and blue.
•Set your Bluetooth headset into pairing mode and place it within proximity to the Vest.
•Both devices should be paired within 30 seconds.
Wired headset connection
Connect your headset to the Vest’s Headphone jack (15) using an audio cable.

Wearing the Vest
All adjusting straps must be loosened before wearing the Vest. Make sure to follow these steps in
order.
•Close and tighten the waist straps.
•Close and tighten the chest strap.
•Pull both shoulder straps in parallel to ensure a tight contact of all haptic units to the body.
Attaching the Vest to a chair
•Attach the Vest to a chair using Woojer Chair Adapter (sold separately)
•Set the Woojer Chair Adapter back holder to the width of your chair
•
Playing
Once you’ve connected the audio source device and headset to the Vest:
•Play your content from the connected source device.
•Use Woojer app for accurate synchronization between audio and haptic.
•Use the Vest’s control buttons to adjust the headphones output levels and sensation levels.
Care and Maintenance
•Keep the Vest Mk. 3™ and accessories device dry. Precipitation, humidity, and all types of
liquids or moisture can contain minerals that will corrode electronic circuits.
•Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
•Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
•Do not attempt to open the device.
•Do not drop. Rough handling can break internal circuit boards and fine mechanics.
•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
•If the device doesn’t work properly, please contact our technical support team through our
website, at www.woojer.com/support

Safety and Warnings (Read carefully before use)
•This product contains a rechargeable Lithium-ion battery and should not be disposed together
with household waste. This product must be discarded in accordance with your local legal
requirements.
•As with other devices with permanent magnets, Woojer Vest Mk. 3™ is not suitable for use by
persons with pacemakers.
•Do not use Woojer Vest Mk. 3™ with headphones/earphones while driving, cycling, or
operating any motorized vehicle. This may create a traffic hazard and may be illegal.
•It can be dangerous to play your music with headphones/earphones at high volume while
walking or engaged in other activities. Exercise extreme caution and discontinue use in
potentially hazardous situations.
•Avoid using headphones/earphones at high volume. Hearing experts advise against
continuous loud and extended music play. Keep the volume at a moderate level, so that you
are better able to hear outside sound.
•Do not use your Woojer Vest Mk. 3™ while it is charging.
•If Woojer Vest Mk. 3™ overheats excessively during use, do not use it and contact our
technical support team through www.woojer.com/s
•Avoid charging your Woojer Vest Mk. 3™ at extremely high or low temperatures.
Declaration of Conformity, Certificates, and Safety Protocols
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interferences that may cause undesired operation .Any changes or
modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation if this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirement.
The device can be used in portable exposure conditions without restriction.
Canada-industry Canada (IC)
This radio transmitter has been approved by Industry Canada. This Class B digital apparatus complies
with Canadian standard ICES-003 This device complies with Industry Canada Licence exempt RSS
standard(s). Operation is subject to the following two conditions. (1) this device may not cause
interference and (2) this device must accept any interference, including interference that may cause

undesired operation of the device. The device has been evaluated to meet the general RF exposure
requirement. The device can be used in portable exposure conditions without restriction.
Bluetooth
The Woojer Vest Mk. 3™Qualified Design Listing was achieved in accordance with the Bluetooth
Qualification Process as specified within the Bluetooth Specifications.
CE Declaration of Conformity
We, Woojer Ltd., declare under our sole responsibility, that this Woojer Vest Mk. 3™product is in
conformity with the standards and other normative documents.
Warranty
12 months from purchase. You can learn more about the warranty through this QR code.
Add link to warranty page/paragraph.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1) L'appareil ne doit pas produire de brouillage;
2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.