WT sensor PCMPT01 Series User manual

1www.wtsensor.com
PCMPT01&PCMPT02&PCMPT03 Series Economical Melt
Pressure Transducer
Features
■signal output:4～20mA,0～
10V,0～5V
■accuracy grade:±1.0%F.S
■special diaphragm coating
■IP65 ingress protection
■80% internal calibration
Applications
■injection molding industry
■chemical fiber industry
Notes:
1 Do not touch the diaphragm with hard
objects, which may cause damage to the
diaphragm.
2 Please read the Instruction Manual of the
product carefully before installation and
check the relevant information of the
product.
3 Strictly follow the wiring method for
wiring, otherwise it may cause product
damage or other potential faults.
4 Misuse of the product may cause danger
or personal injury.
Product overview
PCMPT01&PCMPT02&PCMPT03 series economical melt pressure
transmitter series is specially designed for pressure measurement at
high temperature in the injection molding industry,special diaphrgam
and highly anti-abrasive coating of which enable it to work normally at
high temperature up to 320℃.This series is installed in the manner of
standard threaded connection and has many advantages like high
stability and long service life.
Notes:
1 Do not misuse documentation.
2 The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
3 Complete installation, operation, and maintenance
information is provided in the instructions of the product.
4 Misuse of the product may cause danger or personal injury.
Performance parameters
Input Voltage
24VDC(12～36VDC)
Output
4～20mA,0～10V,0～5V
Accuracy Grade
±1.0%F.S
Pressure Range
Pressure Range

2www.wtsensor.com
Pressure Uni
psi,bar,MPa
Overload Capacity
1.5 times rated pressure
Zero Temp Drift
0.005MPa/℃
Electrical Environmental Temp
-20～85℃
Bridge Resistance
350Ω
Diaphragm Materia
15-5PH
Diaphragm Temp
320℃
E-Connection
5-pin standard aviation connector
Mounting Torque
40N.m Max
Process Connection
M14×1.5
Protection Level
IP65
Temp Measuremen
E,J,K type or Pt100
Pressure range selection
Pressure range code
Pressure Range
1.5M
10MPa、1500psi、100bar
3M
20MPa、3000psi、200bar
5M
35MPa、5000psi、350bar
7.5M
50MPa、7500psi、500bar
10M
70MPa、10000psi、700bar
15M
100MPa、15000psi、1000bar

3www.wtsensor.com
Dimension

4www.wtsensor.com
E-Connection
5-Pin Connector
Voltage Output Signal(0-5V,0-10V)
1
2
3
4
5
S+
E+
S-
E-
CAL
Blue
Red
White
Yellow
Black
5-Pin Connector
Current Output Signal(4-20mA)
1
2
3
4
5
E-
E+
CAL
CAL
Blue
Red
Yellow
Black
How to order
PT - X X X X X X X X
Refer to “Pressure
range selection”
Rigid Stem Length
6：152mm（6 inches）
0：229mm（9 inches）
12：318mm（12.5 inches）
15：381mm（15 inches）
18：460mm（18 inches）
Process Connection
1/2：1/2-20UNF
M14：M14×1.5
M18：M18×1.5
M22：M22×1.5
（movable screw
thread）
Signal Output:
MA: 4-20mA
10V: 0-10V
5V: 0-5V
Product model
111B：rigid stem type
124B：flexible type
131B：flexible type
Pressure Unit
Blank：MPa
P：psi
B：bar
Flexible Length
Blank ：0mm （0 inches ）
（only for PT111B series）
/80：460mm（18inches）
/30:760mm（30inches）
Temp Measurement:
J: J type
K: K type
E; K type
RTD1：PT100

5www.wtsensor.com
Ordering tips:
Ensure compatibility between measured media and contacting part of product when placing an order.
Wotian reserves the right to make any change in this publication without notice. The information
provided is believed to be accurate and reliable as of this product sheet.
Contact us
Nanjing Wotian Technology Co.,Ltd.
website: www.wtsensor.com
Add: 5 Wenying Road, Binjiang Development Zone, Nanjing, 211161, China
Sales Manager: Wuzhou Lian
Email: [e-mail]