Wuloo WL-888 User manual

Wuloo Wireless Intercom System
Model: WL-888
FCC ID: 2AQQS-888
E-mail: [email protected]
Facebook page: @WulooOfficial

The intercom system is the latest product of our company. This product carries
a variety of great features including:
Clear voice quality for high-quality communication;
Incredible long-range communication (up to 1 mile);
Easy expandability to allow you to expand to multi-intercoms systems;
Multiple power sources so you can use the power bank for outdoor use;
Special anti-interference features including 22 channels and 100 codes to
help easily solve interference problems;
User-friendly design. This product is shipped with a quick start guide and
detailed instructions. You can also contact the Wuloo service team for
product related questions and help at any time!
We are dedicated to providing customers with a 100% satisfactory service.
Please feel free to contact us if you have encountered any problems with your
purchase. Our fast and friendly team will provide you with the best possible
service!
Customer Service E-mail: suppor[email protected]
Wuloo Official Facebook Page: @WulooOfficial
Page link: https://www.facebook.com/WulooOfficial/
Sincerely
Wuloo Customer service
Welcome!
Thank you for your purchase！

Contents
1. What’s Included in The Box?
1.1 Intercom Overview
2. Getting Started
2.1 Connect AC Power
2.2 Set Channel & Code
2.3 Make an “Address List”
2.4 Test Connecting
2.5 Distribute Different Stations to Different Users
2.6 Notes
3. Advanced Settings
3.1 Volume Setting
3.2 Power ON/OFF
3.3 Channel & Code Setting
3.4 Functions Description
3.4.1 TALK
3.4.2 GROUP
3.4.3 MONITOR
3.4.4 VOX
3.4.5 CALL
3.5 Usage Scenario
4. Additional Notes
5. Troubleshooting
6. Adding Additional Units
6.1 Expand to more intercom stations
7. Questions & Answers
8. Warranty

1. What’s included in the Box
1.1 Intercom Overview
Every intercom station has the following accessories. If you purchase additional stations, each new intercom
station will come with its own set of the accessories listed below.
2.Getting Started
The basic steps for setting up your intercom are as follows:
2.1 Connect AC Power
2.2 Set Channel & Code
2.3 Make an “Address List”
2.4 Test Connection
2.5 Distribute Different Stations to Different Users
Note：The examples that follow are for 2 intercom stations. For multiple intercom stations,
follow the same directions as listed below.
AC Adapter Cable
Speaker
VOL- / VOL+
Channel Number
Code Number
Channel Code Setting
Power Switch
Function Key
MIC Indicator Light
Power Port （DC 5V 1A)

2.1Connect AC Power
Every intercom is equipped with an adapter (DC 5V1A) and a cable. Please connect every intercom station
to your local AC power. We kindly suggest that you use the original adapter and cable that was included in
your packaging to turn on your device(s). Please feel free to contact us if you have encountered any
problems with the adapter or cable. We will send you a free replacement as covered by the warranty and
will give you a discount on future purchases if your warranty expires.
2.2 Set Channel & Code
This intercom is a real-time communication system. Please confirm that both stations are set to the same
channel and code to be able to communicate.
This intercom has 22 channels (01-22) and 100 codes (00-99) available. The following table shows the
frequency and code of the intercoms:
After you connect to the AC power, press the MENU button . The channel number on the left side of
the screen will flash. Press CH+/ CH- / to set the channel; and click the MENU button again,
this will enable the code number on the right of the screen to flash. Press CH+/ CH- / to set the
code. To complete the channel code setting, press MENU or TALK to exit editing. The screen will
stop flashing.
Member A
keep 5 meters apart when testing
Member B
CHANNEL
1
2
3
4
5
6
FREQUENCY
462.7250
462.5875
462.6125
462.6375
462.6625
462.6875
CHANNEL
7
8
9
10
11
12
FREQUENCY
462.7125
467.5625
467.5875
467.6125
467.6375
467.6625
FREQUENCY
462.6500
462.6750
462.7000
462.5625
CHANNEL
19
20
21
22
FREQUENCY
467.6875
467.7125
462.5500
462.5750
467.6000
467.6250
CHANNEL
13
14
15
16
17
18
GROUP Frequency:467.7125MHz GROUP CODE:743N
NO
1
2
3
4
5
6
7
8
9
10
CODE
754N
743N
734N
77
79.7
82.5
85.5
88.5
91.5
94.8
NO
11
12
13
14
15
16
17
18
19
20
CODE
97.4
100
103.5
107.2
110.9
114.8
118.8
123
127.3
131.8
NO
21
22
23
24
25
26
27
28
29
30
CODE
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
19.9
186.2
NO
31
32
33
34
35
36
37
38
39
40
CODE
7192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
023N
025N
NO
41
42
43
44
45
46
47
48
49
50
CODE
026N
031N
032N
043N
047N
051N
054N
065N
071N
072N
NO
51
52
53
54
55
56
57
58
59
60
CODE
073N
074N
114N
115N
116N
125N
131N
132N
134N
143N
NO
61
62
63
64
65
66
67
68
69
70
CODE
152N
155N
156N
162N
165N
172N
174N
205N
223N
226N
NO
71
72
73
74
75
76
77
78
79
80
CODE
243N
244N
245N
251N
261N
263N
265N
271N
306N
311N
NO
81
82
83
84
85
86
87
88
89
90
CODE
315N
331N
343N
346N
351N
364N
365N
371N
411N
412N
NO
91
92
93
94
95
96
97
98
99
CODE
413N
423N
431N
432N
445N
464N
465N
466N
503N
Connect to local AC power
TALK
MENU
MENU
MENU
CH+ CH-
CH+ CH-

This intercom is an updated version. It will restore the original Channel&Code number within 1 minute of
intercom inactivity after you use”Lock Channel&Code number” function.
How to use”Lock Channel&Code number” function: After you set a Channel&Code number(num-
bers in the Screen stop flashing means you finished setting) and you want to lock this Channel&Code
number as the original number of this intercom station, you can Press&Hold the MENU button for 3
seconds (you can heard the beep sound after 3 seconds) to lock this Channel&Code number. And you can
also change the locked original Channel&Code number by locking again with other Channel&Code
Note:
1. We suggest that you set all the stations to the same code. Once complete, you will only need to adjust
the channel to call another user. Setting the stations to the same code allows you to call other users
without having to set the code every time.
2. This intercom is an updated version. It will restore the original Channel&Code number within 1 minute of
intercom inactivity after you use”use”Lock Channel&Code number” function. How to use”Lock
Channel&Code number” function, Please check part 2.2 in this manual.
2.3 Make an “Address List”
If you have a large intercom system with many intercom units and each unit has a different channel
number, you may need an “address list” to help you remember which intercoms belong to which users.
Record the channel number for each user, and give every user of your integrated intercom system this
“address list.” We recommend making this list for larger intercom systems, though it may not be necessary
for networks with fewer intercoms.
Code 01
Channel 03
Member A Code 01
Channel 05
Member B
Member A:
Channel 03 Code 01
Member B:
Channel 05 Code 01
Member C:
Channel 06 Code 01

Step 6: Intercom A （Channel 03, Code 01）if Intercom
A hears the voice of the user of Intercom B, press and
hold TALK button to reply ”hello, testing one, two,
three” to test the voice connection of Intercom A;
Step 3: Intercom A (Channel 03, Code 01）set the channel
number to”05” , then press the CALL button ；
2.4 Test Connecting
The steps for testing your connection are as follows:
2.5 Distribute Different Stations to Different Users
After testing, you can assign different intercom stations and “address list” to different users.
Step 1:Separate intercoms at least 5 meters apart to prevent interference
Step 5: Intercom B（Channel 05, Code 01）if ringing
was successful, press and hold the TALK button ,
and say the word “hello” to test the voice connection
of Intercom B. Release the TALK button after
speaking;
If you can hear audio on both ends of the intercom system using the steps above, you have successfully
set up all the units of your intercom system.
Step 2: Set up each intercom to have the same code, but different channels. For this
test, Intercom A will have channel 03, code 01 while Intercom B will have channel 05,
code 01 . If you are testing multiple units, continue to program them to the same code
while assigning each intercom a different channel number (01-22).
Step 4: Intercom B（Channel 05, Code 01）see if
Intercom B rings successfully;
Member A:
Channel 03 Code 01
Member B:
Channel 05 Code 01
TALK
TALK
TALK
CALL

Press & Hold to talk;
Click is invalid.
2.6 Notes
1. You will need to press and hold the TALK button when
you want to speak to another user. Simply clicking the TALK
button is an invalid entry;
2. You cannot press the TALK button on both sides of the
system at the same time. One side may press and hold the
TALK button to speak, then release the TALK button
after they have finished their message. The other side can
then answer your message by pressing and holding the TALK
button and repeating the same steps. You will not be
able to hear the other user’s voice if both sides are pressing
and holding the TALK button at the same time.
TALK
TALK
TALK
TALK
TALK
TALK
TALK
Speaking
Listening Speaking
Speaking Speaking
Listening

3.Advanced Settings
3.1 Volume Setting
This intercom has 8 levels of volume available. Press VOL+/VOL- to set the volume.
3.2 Power ON/OFF
Press and hold the ON/OFF button for about 3 seconds to open/close the intercom. You can close it
when you don’t want to get any voice interference.
3.3 Channel & Code setting
This intercom is a real-time communication system. Please confirm that both stations are set to the same
channel and code to be able to communicate. After you connect to the AC power, you need to set the
channel & code for the intercom.
This intercom has 22 channels (01-22) and 100 codes (00-99) available(detail frequency data, please check
the table at 2.2 in this manual) .
1. Press “MENU button” , the channel number on the left side of the screen will flash. Press
CH+/ CH- / to set the channel;
2. Click the MENU button again, this will enable the code number on the right
of the screen to flash. Press CH+/ CH- / to set the code.
3. To complete the channel code setting, press MENU or TALK to exit editing.
The screen will stop flashing.
8 levels of volume available
TALK
Channel Number Code Number
MENU
MENU
MENU
CH+ CH-
CH+ CH-

3.4 Functions Description
This intercom has multiple functions you can enjoy:
3.4.1 TALK
To use the TALK feature, press and hold the TALK button , and the indicator will turn red light. Please
speak while the red indicator light is on as you press the TALK button . Once you are done talking,
release the TALK button and the indicator will turn off. Then your message will be sent and any other
intercom station with the same channel and code settings will receive your message.
Note:
1.Intercom is single-way same frequency communication system. When you press the TALK button ,
you cannot receive messages.
2.Intercoms have a TOT transmission time limit of 1 minute. This means you cannot press and hold the
TALK button to speak for more than 1 minute per message.
3.When multiple intercom stations are set to the same channel and code, any message sent by any of
those units will be received by every intercom with those same channel and code settings. For example,
if 4 intercoms are set to code 01 on channel 4, any message sent by one intercom will be received by the
remaining 3 intercoms.
4.This intercom is an updated version. It will restore the original Channel&Code number within 1 minute
of intercom inactivity after you use”Lock Channel&Code number” function. How to use”Lock
Channel&Code number” function, Please check part 2.2 in this manual.
This intercom is an updated version. It will restore the original Channel&Code number within 1 minute of
intercom inactivity after you use”Lock Channel&Code number” function.
How to use”Lock Channel&Code number” function: After you set a Channel&Code number(num-
bers in the Screen stop flashing means you finished setting) and you want to lock this Channel&Code
number as the original number of this intercom station, you can Press&Hold the MENU button for 3
seconds (you can heard the beep sound after 3 seconds) to lock this Channel&Code number. And you can
also change the locked original Channel&Code number by locking again with other Channel&Code
number.
TALK
TALK
TALK
TALK
TALK
Press&Hold to speak, and release it
after speaking.
Indicator Light

listeninglisteninglisteninglistening
Listening
Speaking
Listening
Member A
Press and hold the GROUP button Member B
Member C
3.4.2 GROUP
This function is used for calling all the intercom stations within a system at the same time. Press and hold
the GROUP button to speak to all the intercom stations in this system, even if they have different
channels and codes.
To confirm if an intercom station is part of your system, simply check the intercom’s frequency and code
using our frequency table (check the table in the 2.2 in this instruction manual).
GROUP
“GROUP” function update: Add a switch for GROUP function
For Wuloo intercom system have sold a huge amount in USA, so some customers will get interference
from other home or pick up strange conversation when your neighbors also bought Wuloo intercom
system. When your neighbors use “GROUP” function, you can not solve this issue by change channel or
code.
So Wuloo technology department made a update version for Wuloo intercon system, we made a switch
for GROUP function, if you get a interference and can not solve it by changing channel or code, it means
you get interference by GROUP function from your neighbors, so you can turn off the GROUP function
of your intercom units, then you can solve the interference.
Turn off the “GROUP”:
How to turn on or turn off the GROUP function:
The GROUP function is turned on by default at the factory.
Press&Hold the “GROUP” button and “VOL-” button at the same time, you will hear a beep voice, it means
you have turned off the GROUP function. After you turned off the GROUP function, when you press the
GROUP button, there is a beep voice and you can not use GROUP function anymore.
Turn on the “GROUP”:
Press&Hold the “GROUP” button and “VOL+”button at the same time, you will hear a beep voice, it means
you have turned on the GROUP function. And you can use GROUP function as before.

Press MONITOR button, keep in
monitored status in 10 hours
Set the same Channel&Code as baby room,
then you can hear the baby’s voice.
3.4.3 MONITOR
Put the intercom in the room you wish to have monitored (for example, a baby’s room), and then press
the MONITOR button . This intercom unit will stay in transmit mode, where it will constantly send
audio to any intercom unit with same channel and code. The monitor function has a 10-hour time limit. If
you need to monitor for a longer period of time, you will need to reset it again every 10 hours.
Note:
1. Monitor can only support 1 monitor unit (receiving audio) per 1 monitored unit (sending audio). Or,
multi-monitor (many units receiving audio) to 1 monitored unit (one unit sending audio). One monitor
unit cannot receive audio for several monitored units that are all sending audio to it at the same time.
2. The intercom station in monitor mode is monitored side, please put the intercom closed to the
monitored person(like baby);
3. The monitored side(the intercom in monitor mode) can only sent voice out and can not receive any
voice in.
MONITOR
listening Speaking
3.4.4 VOX（Voice Operated Exchange）
Press the VOX button on the intercom station enter VOX mode. In this mode, the screen will
present a VOX letter.
In VOX mode, you do not need to press and hold the TALK button to speak. Every time you want to
speak, you will need to speak closely into the intercom station to activate it. When you are speaking
closely into the intercom, the indicator light will turn red meaning it has successfully detected your voice.
Any other intercom unit with the same channel and code can receive your audio message and can press
and hold the TALK button to answer you. Besides, other station can also enter VOX mode at the
same time.
When both side enter VOX mode, both of you can speak without hold the TALK button , but please
note：1. You need to say something(like “Hello”) to activate it before you speaking words; 2. You need to
wait until other side finished speaking, then you can start to activate your intercom and speak in your
side;
So it means even both side can use VOX function and speaking without hold TALK button at the same
time, but the communication have some delay, and you need to talk one by one and keep patience.
VOX mode has a 24-hour time limit. If you need to talk with another station for a longer period of time,
you will need to reset it again every 24 hours.
To quit VOX mode, simply press VOX button again.
VOX
VOX
TALK
TALK
TALK

3.4.5 CALL
Set the channel and code to the same settings as the intercom you want to call, then press the CALL
button . Both your intercom and other user’s intercom will ring. Other intercoms can hear the
ring, they can press and hold the TALK button to speak to you and release the TALK button
after they have finished speaking. You can then press and hold the TALK button to reply.
3.5 Usage Scenario
We set a usage scenario to help you understand it better and use it better.
Usage scenario description: there is a company, include 4 department, include general manager room,
financial department, HR department and sales department. This company bought 4 intercom stations,
and distribute them to 4 department to help them communicate better.
Firstly:set the channel and code for every intercom, and distribute them to every department, shows as
below table:
Channel
Code
Device Location
02
02
General
Manager Room
03
02
Financial
Department
04
02
HR
Department
05
02
Sales
Department
General Manager Room
Channel 02 Code 02
Financial Department
Channel 03 Code 02
HR Department
Channel 04 Code 02
Sales Department
Channel 05 Code 02
CALL
TALK TALK
TALK

Notes：
1.VOX mode and MONITOR mode are very similar, but also have a few key differences:
An intercom unit in MONITOR mode
should be put in the monitored room (like
a baby’s room)
Monitor mode lasts for up to 10 hours
The monitor does not need voice
activation
In MONITOR mode, monitoring side
cannot send audio messages, even if you
press and hold the TALK button.
You can only hear the voice from the
monitored room (like a baby’s room) or
change to another channel or code to
speak with others
An intercom unit in VOX mode should be
stationed on your side to help you speak
without pressing and holding the TALK button
VOX mode lasts for up to 24 hours
VOX mode needs to detect someone within a
close speaking range to activate the intercom
In VOX mode, you can speak without pressing
and holding the TALK button. The other user
can press and hold the TALK button to talk to
you.
Monitor mode VOX mode
VOX
Present “VOX”
Press the VOX button
to enter VOX mode,
and you do not need
to press and hold the
TALK button to speak
Usage Scenario 1：The general manager informs the entire staff that they’re having a meeting in the
meeting room in 10 minutes. In this case, the manager can use the GROUP function on the intercom
found in his office to notify all the intercoms at the same time.
General Manager Room
Channel 02 Code 02
Financial Department
Channel 03 Code 02
HR Department
Channel 04 Code 02
Sales Department
Channel 05 Code 02
Press & Hold the GROUP
button to talk to all the
members at the same time.

Usage Scenario 4：There is a meeting in the HR departmental office, but the general manager is busy
and doesn’t have time to participate in the meeting. However, the meeting is still very important, and the
general manager wants to listen in on the meeting. In this case, the office of the HR department can set
their intercom to MONITOR mode, and the general manager can set his or her intercom channel and
code to the same one as the intercom in the HR department. The general manager can now hear audio
from the HR department meeting. Please note that in this case, the general manager can listen to the
meeting but cannot speak to the participants of the meeting.
General Manager Room
Channel 02 Code 02
HR Department
Channel 04 Code 02
Set the channel number to “04”
( the same as HR department)
Press MONITOR button to enter monitor mode, and
this intercom will be monitored by general manager
Usage Scenario 2：The general manager’s office has something important to tell the financial
department and needs to ask the financial manager to come to his office right away. In this case, the
general manager can use the CALL function to call the head of the financial department by pressing and
holding the TALK button to send the message.
Usage Scenario 3：General manager room need to talk with sales department, may be need talking
3-5minutes(it means talking will take a while but not too long). In this case, can use VOX function,
General manager room can talk with sales department without pressing the TALK button.
1.Set the Channel to 3, then press CALL button;
2.The Financial will hear the ring, then she can
Press&Hold the TALK button to speaking.
3.You can hear the voice from Financial, and
Press&Hold the TALK button to reply her.
General Manager Room
Channel 02 Code 02
General Manager Room
Channel 02 Code 02
Financial Department
Channel 03 Code 02
HR Department
Channel 04 Code 02
TALK
Set the channel to 04, then press the VOX button
to enter VOX mode, then general manager can
talk with HR department hands free

Notes:
1. The intercom system is a real-time communication system which has no memory or storage function.
Therefore, you cannot receive any information while you are talking to other users.
2. Please note that you will need to set the same channel and code if you want 2 intercom stations to
receive communication. It also means that any other user can also communicate if they have same channel
code. For example, your neighbors may be able to interfere with your intercom system. We suggest setting
another channel or code to avoid interference.
4.Additional Notes
5.Troubleshooting
Possible Solution
1.Check the AC power cord to see if it is connected properly. If it is not, please
connect it now.
2.Change the AC adapter that was included in your initial set. We will send you
a new adapter for free if the current adapter broke within your warranty period.
If your warranty has expired, you can buy an adapter from our store at a
significant discount.
3.Press and hold CH+ button , then connect to AC power again, this operation
can reset the intercom;
1. Check to make sure the intercoms have been set to the same channel and
code. The two intercoms must have the same channel and code for the users
to communicate.
2. Be sure to release the TALK button after speaking. You will not be able to
hear responses while you are holding the TALK button.
3. Check to make sure the intercom is not in monitor mode. Monitor mode can
only send audio but cannot receive it. If so, you can press the MONITOR button
again to quit monitor mode.
4. Your volume may be too low. Press the VOL+ button to increase the volume
of your intercom device.
1. Check to make sure the intercoms have been set to the same channel and
code. The two intercoms must have the same channel and code for the users
to communicate.
2. Please press and hold the TALK button to speak after the other user has
finished speaking. Release the TALK button to receive responses from the other
user.
1. Move the intercoms away from each other or other devices (e.g., speakers) to
eliminate interference from other audio devices.
2. Change your intercom to another channel or code to avoid interference from
other wireless intercom devices.
Most issues that arise can easily be resolved by changing the settings on your intercom.
Please read this user manual carefully before you use this machine. Use the table below to find your exact
issue and the possible solutions for it. If you need more help, you are welcome to contact us via our
customer service email at [e-mail] and our official Facebook page:@WulooOfficial .
Trouble
The intercom is
connected to AC
power, but the machine
does not work or the
screen does not light
The intercom cannot
receive responses
The intercom cannot
talk to other intercoms
The intercom is making
a continuous “beep”
sound

This intercom system supports expansion to more intercom stations, providing you with even
more convenience.
6.1 Expand to more intercom stations
If you find that you do not have enough intercom stations, and you wish to expand to include more
devices, you can purchase additional intercom units in our store. Please select the same model number
when purchasing additional units. Once your additional intercoms arrive, set them to the same channel and
code as your existing system to communicate with the intercom devices you’ve already installed.
6.Adding Additional Units
Below are some common problems encountered by our customers as well as the detailed answers you
can use for your reference. We hope this information can help you use your device more efficiently.
Question 1: Why does my intercom sometimes receive noise?
Answer 1: This is likely due to the fact that the intercom uses FM wireless technology. It uses public
frequency, so if someone close to you is using wireless intercom devices at the same frequency, you
may experience interference. To solve this problem, you just need to change the intercom settings to a
different channel or code.
Question 2: This intercom uses FM wireless communication. Do I need to have a license?
Answer 2: T his intercom system uses public frequency, so there is no need for a license.
7.Questions & Answers
The intercom units
do not work
The intercom does
not receive any
information while it
is in Monitor mode
1. Try setting up the units in different locations. If the units work in a different
location but not in your home, the issue may be with the walls of your home or
office.
1. Monitor can only support 1 monitor unit (receiving audio) per 1 monitored
unit (sending audio). Or, multi-monitor (many units receiving audio) to 1
monitored unit (one unit sending audio). One monitor unit cannot receive audio
for several monitored units that are all sending audio to it at the same time.
2. The monitor function can work for up to 10 hours at a time. Please reset
monitor mode if you wish to monitor for a longer period of time.
3. The intercom station in monitor mode is the “monitored” side. Please place
the intercom close to the person you wish to monitor, for example, a baby.
4. The monitored side (the side with the intercom on monitor mode) can only
send audio but cannot receive it.

Question 3: Can I talk to the other user without pressing the TALK key?
Answer 3: No, you cannot. You must hold the TALK button the entire time you are speaking as usual. That is
the working principle of the intercoms. All similar machines operate in a similar manner. However, you can use
VOX function to talk without hold the TALK button. To learn more about the VOX function, please read part
3.4.4 of this manual.
Question 4: If I use a public frequency, will I encounter interference?
Answer 4: Interference is rare, however, it can happen. When others use the same frequency, you may
experience interference, you can avoid this by simply changing your channel or code.
Question 5: Can I use batteries for these machines?
Answer 5: No, this intercom does not work with batteries. Alternatively, you can use the power bank (DC
5V1A ) instead. This works well when you want to use the power bank and take the intercom outdoors.
Question 6: What voltage do the intercoms work with?
Answer 6: This intercom package comes complete with an adapter that supports 100-240V AC power. The
original adapter is useful worldwide.
If you have more concerns, please feel free to contact us via our customer service email at
[e-mail]. We will do our best to answer you within 12 business hours. You can also visit our
official Facebook page and @WulooOfficial. We will reply to you immediately if our admin is online, or usually
within 6 hours if the admin is not immediately available. Thank you very much for choosing Wuloo！
We believe in honesty and reliability for all our products. That’s why all of our products must pass a strict test
before they are packaged for shipping. We are dedicated to providing our customers with 100% satisfactory
service and we are proud to provide a warranty service for this product:
1. We provide free replacements instead of repairs for quality-related issues detected within 1 year.
2. We provide a whopping 50% discount for new replacement purchases made within 2 years if the intercom
has suffered accidental damage (e.g., drop and break).
3. We also provide lifetime service for all questions regarding your intercom.
If you have any additional questions, you are welcome to contact us via email or Facebook:
Email: [e-mail]
Facebook Page: @WulooOfficial
Page link: https://www.facebook.com/WulooOfficial/
For additional coupons and deals on products, follow us on our Facebook page. We send out coupons and
promotions regularly to help our previous customers save the most on their future purchases! Thank you so
much for choosing Wuloo!
8.Warranty