X-media XM-SW1008D User manual

User Guide
Unmanaged 10/100Mbps Switch
Model No.:
XM-SW1008D
XM-SW1016D
XM-SW1024
Version 1.0

10/100Mbps Switch
P a g e | 2
Package Contents
The following items should be found in the package:
•One of the following product: XM-SW1008D; XM-SW1016D; XM-SW1024
•Power Adapter (XM-SW1008D or XM-SW1016D only)
•User Guide
Note: The above list is for reference only. The actual content may differ according to the product
you purchased. Please save the original packaging material for future reference. The wall-mounting
screws are not provided. If any of the listed items are damaged or missing, please contact with your
seller.
C o nv e nt i o n s
The “Switch” mentioned in this User Guide stands for following products: XM-SW1008D; XM-SW1016D;
XM-SW1024, without any explanations. All these devices are sharing this User Guide. All product
models listed just differ in appearance and figures in this User Guide.
Connecting the Switch
Step 1
Plug the supplied power adapter into the Switch and the other end into a power outlet, power
strip, or surge protector (recommended). Verify the power indicator is lit on the Switch.
Step 2
Connect one end of an Ethernet cable in the device you want to connect to the Switch and the
other end into one of the Ethernet ports on the Switch. Check the Link lights (LEDs) on both the Switch
and the device to verify that there is a valid connection.

10/100Mbps Switch
P a g e | 3
The Switch LEDs are located on the front panel:
LED
Status
Indication
Power
On
The Switch is Powered On
Off
Nopowersource
*Please check if the power cord is connected to Switch
properly, and make sure the Power is On.
Ethernet LED
On
The corresponding Ethernet port is connected to a
network device.
Flashing
Data is being transmitted and received.
Off
No device is connected to corresponding port.
*Please check if the cable connector is firmly plugged
into the Switch and device, and verify the connected
device is turned on and working well.
Network Diagram