x-net IGB1110PF User manual

Ver. 1.0
XNET
(IGB1110PF/IGB1110NF)
User Manual

XNET User Manual
2 / 71
Important Notices
The copyright of this manual is owned by CNB Technology Inc.
It is illegal to copy and distribute this manual without permission.
Damages caused by misuse and by use of parts not recommended
will not be applicable for support.
Contact the store or the manufacturer immediately if (you think)
there is any problem with the product.
Contact the store or the manufacturer before disassembling the
product for alteration or repair.
XNET is a trademark of CNB Technology Inc.
zThis product complies for CE (Europe) and FCC (USA) regulations
for industrial/home-use electrical device.
About this Manual
A compatibility and durability test ensures this product’s high performance.
This manual is for XNET Network product users only, and it describes operations related
to XNET Network products.
Please read this manual thoroughly paying attention to cautions and warnings before
using the product even if you have used similar products before.

XNET User Manual
3 / 71
Index
1 System Administration..................................................................................................6
1.1. Logging On.............................................................................................................................6
1.1.1. Using Internet Explorer .............................................................................................................. 6
1.1.2. ID and Password........................................................................................................................ 6
1.2. Configuring Camera ...............................................................................................................8
1.3. Web Viewer (Index.html) ......................................................................................................10
1.4. Status Window......................................................................................................................12
1.5. Configuring Users.................................................................................................................13
1.6. Setting Date &Time ..............................................................................................................15
1.7. Configuring Multi-Viewer ......................................................................................................17
1.8. Configuring PTZ ...................................................................................................................19
1.9. Maintaining Server Configurations .......................................................................................21
1.10. Generating Log Report.......................................................................................................23
1.11. Configuring Audio ...............................................................................................................25
1.12. Configuring Video...............................................................................................................27
1.13. Configuring RTP/RTSP ......................................................................................................29
1.14. Configuring Camera Condition ...........................................................................................31
1.15. Configuring the Network(TCP/IP) parameters....................................................................33
1.18. Configuring IP Filtering.......................................................................................................35
1.19. Configuring HTTP...............................................................................................................37
1.20. Configuring UPnP/DynDNS/Bonjour ..................................................................................39
1.21. Configuring CMS ................................................................................................................41
1.22. Configuring Event Type ......................................................................................................42
1.23. Configuring Sensor/Alarm ..................................................................................................44
1.24. SMTP Setup .......................................................................................................................46
1.25. Configuring FTP .................................................................................................................48
1.26. Configuring and operating Digital PTZ ...............................................................................50
1.27. Configuring and operating PTZ ..........................................................................................51
1.28. Configuring Motion Detection area.....................................................................................53
1.29. Configuring Multi View Option ............................................................................................55
2 OSD Menu ....................................................................................................................56
2.1. CAM NAME ..........................................................................................................................56
2.2. LENS ....................................................................................................................................57
2.2.1. DC/VIDEO(ALC)....................................................................................................................... 57
2.2.2. MANUAL(ELC) ......................................................................................................................... 57

XNET User Manual
4 / 71
2.3. EXPOSURE .........................................................................................................................58
2.3.1. AGC.......................................................................................................................................... 58
2.3.2. BRIGHTNESS .......................................................................................................................... 58
2.3.3. SHUTTER ................................................................................................................................ 58
2.3.4. DSS .......................................................................................................................................... 58
2.3.5. INITIAL SET ............................................................................................................................. 58
2.4. DAY/NIGHT ..........................................................................................................................59
2.4.1. AUTO (DAY/NIGHT mode is changing by AGC Level) ............................................................ 59
2.4.2. EXT (Mode changing by external trigger) ................................................................................ 59
2.4.3. IRED (DAY/NIGHT mode is changing by Cds Sensor) ............................................................ 60
2.5. WDR/BLC/ECLPS ................................................................................................................61
2.5.1. WDR......................................................................................................................................... 61
2.5.2. BLC .......................................................................................................................................... 61
2.5.3. ECLIPSE .................................................................................................................................. 62
2.6. WHITE BAL ..........................................................................................................................63
2.6.1. ATW1........................................................................................................................................ 63
2.6.2. ATW2........................................................................................................................................ 63
2.6.3. PUSH ....................................................................................................................................... 63
2.6.4. MANUAL .................................................................................................................................. 63
2.7. 3D-DNR................................................................................................................................64
2.7.1. LEVEL ...................................................................................................................................... 64
2.7.2. GLOBAL MOTION.................................................................................................................... 64
2.8. IMAGE ADJ ..........................................................................................................................65
2.8.1. DIGITAL ZOOM ........................................................................................................................ 65
2.8.2. D-EFFECT................................................................................................................................ 66
2.8.3. COLOR..................................................................................................................................... 66
2.8.4. CONTRAST.............................................................................................................................. 66
2.8.5. SHARPNESS ........................................................................................................................... 66
2.8.6. CR GAIN .................................................................................................................................. 66
2.8.7. CB GAIN................................................................................................................................... 66
2.9. SPECIAL ..............................................................................................................................67
2.9.1. CAMERA ID.............................................................................................................................. 67
2.9.2. MOTION Detection................................................................................................................... 68
2.9.3. PRIVACY MASK....................................................................................................................... 69
2.9.4. LANGUAGE ............................................................................................................................. 70
2.9.5. STABILIZER ............................................................................................................................. 70
2.9.6. L/L (SYNC ................................................................................................................................ 70
2.9.7. GAMMA MODE ........................................................................................................................ 70

XNET User Manual
5 / 71
2.9.8. FACTORY RESET.................................................................................................................... 70
2.9.9. COMM SET .............................................................................................................................. 71
2.10. SAVE & EXIT......................................................................................................................71

XNET User Manual
6 / 71
1 System Administration
1
1. .1 1. . L Lo og gg gi in ng g O On n
You can log on as an administrator using either Internet browser or ‘CMS’ software. (This manual will describe
about using Internet browser only.)
1
1. .1 1. .1 1. . U Us si in ng g I In nt te er rn ne et t E Ex xp pl lo or re er r
Type the IP Address of the XNET product in the address bar and press enter.
e.g.) : http://192.168.123.100
If the HTTP port has been changed from the default value, enter the new port as shown below:
IP Address of the XNET: Port No.
e.g.) : http://192.168.123.100:8080
1
1. .1 1. .2 2. . I ID D a an nd d P Pa as ss sw wo or rd d
If you are logging in as an administrator, the Log-In box will appear as shown in figure 1-1. Basic Setup page
will appear when you enter id and password.

XNET User Manual
7 / 71
Figure 1-1 Log-in window
The default user name and password is “root” and “admin”respectively.
If you forget the administrator’s password, “Factory Reset” is the only way to regain
access. However, since this will retrieve all default settings, you need to configure the
network settin
g
s usin
g
IP installer software a
g
ain.
For security purpose, it is recommended to change the administrator’s id and
password from their default values. Please be careful not to forget them or expose
t
h
e
m
to
ot
h
e
r
s
. Pl
ease
r
e
f
e
r
to
[
1.
5
]
f
o
r
deta
il.

XNET User Manual
8 / 71
1
1. .2 2. . C Co on nf fi ig gu ur ri in ng g C Ca am me er ra a
When you log in as an administrator, XNET’s Basic Setup page will appear as shown in Figure 1-2. Setup
pages for different features can be accessed from this page. Access to each feature are controlled by different
Figure 1-2 Basic Setup Page

XNET User Manual
9 / 71
Basic Setup Page can be accessed from Operator group level and up. If you want to access Administrator
level page in this user level, you need to log in as Administrator. Please refer to the following table for
access authority:
●Accessible
▬Not Accessible
Function
Access
Administrator Operator Viewer
Index Page ●●●
Multi-Index Page ●●●
PTZ Page ●●▬
Motion Page ●●▬
Users
Setup Page ●▬▬
Date&Time
Setup Page ●●▬
Multi-Viewer
Setup Page ●▬▬
Maintain Server
Setup Page ●▬▬
System / Log
Setup Page ●▬▬
Audio
Setup Page ●●▬
Video
Setup Page ●●▬
Camera Condition
Setup Page ●●▬
TCP / IP
Setup Page ●▬▬
IP Filtering
Setup Page ●▬▬
SMTP
Setup Page ●▬▬
FTP
Setup Page ●▬▬
HTTP
Setup Page ●▬▬
UPnP / DynDNS
Setup Page ●▬▬
RTP
Setup Page ●▬▬
CMS
Setup Page ●▬▬
Event Type
Setup Page ●●▬
Sensor/Alarm
Setup Page ●●▬
PTZ Configuration
Setup Page ●●▬

XNET User Manual
10 / 71
1
1. .3 3. . W We eb b V Vi ie ew we er r ( (I In nd de ex x. .h ht tm ml l) )
When you access an XNET product, Web Viewer page will appear automatically. Viewer area displays the
video output from the camera, and menu bar contains taps that lead to each feature setting page.
Figure 1-3 Web Viewer Page