X-Vision XA200S User manual

8
CCTV
Manufactured exclusively for:
Xvision (Europe) Group,
Head Office: London, U.K.
Email: [email protected].uk
Web: www.x-vision.co.uk
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your
local distributor.
LIMITED WARRANTY:
This product is supplied with a 1 Year warranty. The Warranty
excludes products that have been misused, (including accidental
damage) and damage caused by normal wear and tear. In the
unlikely event that you encounter a problem with this product, it
should be returned to the place of purchase.
Model: XA200S
Surface Mount Colour
Door Entry System
CCTV
Model:
XA200S
Surface Mount Colour Door
Entry System
Before you begin
• Please unpack the box carefully and identify that all the parts are present.
• Do not cut the cables, this will void the warranty.
• Make sure you use only the recommended power supply. Damage caused to
the unit by incorrect voltage or wiring is not covered by the warranty.
XA200S Inst 1.2-Print 18/4/08 12:03 pm Page 1

Thank you for purchasing this Xvision Door Entry System. Before
operating this product, please read this instruction manual carefully.
This stylish Colour Video Door Entry system is ideal for small business
and domestic use and features a Colour Surface Mount Door Camera
and a Hands Free 4” LCD Colour Monitor with Door Release button and
contacts. The system features 2 way audio between camera and
monitor and door release function.
Two way audio facility allows you to communicate with visitors
Remote unlock function allows you to open the door
Surface mount fitting
3. Features
1. Safety Precautions
2. Product Description
2 7
9. Specifications
8.3 Press the Monitor 1 button on the Monitor unit to see picture from the Entry
Camera at any time. The LED indicator will light on the top edge of the unit. Press the
button again to return to standby, otherwise it will return to standby automatically
after 60 seconds.
8.4 Control the screen contrast by turning the Contrast wheel on the top of the unit.
8.5 Control the screen brightness by turning the Brightness wheel on top of the unit.
8.6 Control the volume level by turning the Volume wheel on the top of the unit.
Entry Phone/ Monitor
Surface Mount Entry Camera
Power Source: 13.5V/1A
Installation: 4wire cabling
Display: 4.2” Colour TFT LCD Screen
Communication Type: Hands Free
Max. Wiring Distance: 50m -165 feet (22AWG, 0.65mm 4 wires)
Operating Temp: 0 - 40°C
Weight: 0.4 Kg
Dimensions (WxHxD): 200 x 135 x 35mm
Power Source: Provided by Entry Phone/ Monitor
Camera: 1/3” Colour
Installation: 4 wire cabling
Communication Type: Hands Free
Max. Wiring Distance: 50m -165 feet (22AWG, 0.65mm 4 wires)
Operating Temp: 0 - 40°C
Weight: 0.23 Kg
Dimensions (WxHxD): 142 x 97 x 50.9mm
XA200S Inst 1.2-Print 18/4/08 12:03 pm Page 2

4. Contents
Power Supply 4Wire
Connector (x2)
User
Manual
Fixing
Screws
Surface Mount
Entry Camera
1. Microphone
Highly Sensitive Condenser
Microphone
2.Camera
Colour CMOS Camera
3. Speaker
Provides high quality audio
4. Call Button
Activates the monitor and chime,
alerting you and showing the picture
of the visitor automatically
Entry Phone/
Monitor
Mounting Bracket
5. Controls
3
Surface Mount Entry Camera
6
6. Installation (continued)
6.1.3 Place the Entry Phone/Monitor onto the
mounting bracket and press down to mount.
Note: Do not install the Monitor and camera units
where they will be exposed to dirt, direct sunlight
or strong light source, moisture, high temperatures
or high humidity.
Select a mounting position close to an electrical
plug socket where it is easy to view the TFT screen
and operate the monitor.
7. Wiring
8. Operation
8.1 When a visitor presses the Call button on Entry Camera, the Monitor unit will
sound and display the visitor’s image on screen. The user can press the Talk button to
communicate with the visitor.
8.2 The user can press the Release button on the Monitor unit to unlock the door
and allow the visitor to enter.
Entry
Phone/Monitor
Back
DC 13.5V
Door
Release
Power
(Optional Accessories)
Surface Mount Entry
Camera Back
XA200S Inst 1.2-Print 18/4/08 12:03 pm Page 3

54
1. Loudspeaker
2. Microphone
3. TFT Screen (4.2” Colour Display)
4. Power Indicator LED
5. Monitor 1 Button
6. Monitor 2 Button
7. Talk Button
8. Release Button
9. Volume Control
10. Brightness Control
11. Contrast Control
5. Controls
Entry Phone/ Monitor
11
10
9
4
3
7
8
5
6
1
2
Outdoor Station of
Indicator Light
6.1 Installation
Please use the cable recommended by supplier. Don’t use UTP or Coax Cable.
6.2 Viewing Range
6. Installation
Surface Mount Entry Camera
Surface Mount Entry Camera
Vertical Side View Top View Front View
Note: The dimensions shown above are for reference only, they may change
depending upon the surrounding.
6.3 Installation Conditions
REFLECTED
SUNLIGHT
DIRECT
SUNLIGHT
6.1.1 Choose a suitable location to mount the unit.
6.1.2 Toinstall the mounting bracket at the chosen
location, drill a hole in the centre of the bracket
large enough for the the electrical wires to be
pulled through. Connect the indoor and outdoor
units with the cable supplied (see wiring diagram).
XA200S Inst 1.2-Print 18/4/08 12:03 pm Page 4