X2 Computing Carbon X220 User manual



1

 
Carbon X220
User Manual



2

 
Table of contents

First Steps…………………………………......................... 3
Introduction……………………………………………..….. 4
Getting to know your tablet……………………..... 5
View and interface…………………………………………......... 5
Packing List …………………………………………. ...... 13
Optional Accessories……………………………….… 14
Getting Started………………………………………….… 16
Connecting the AC Power………………………..… .. 16
Turning the tablet on and off…………………… ... 17
The optimised use for sunlight readable
touch screen………………………………………...18
Specifications…………………………………………….… 19



3

 
First Steps
This manual will help you get the most from your tablet. Please read it carefully before starting
Let your tablet acclimatise itself
Do not power up your tablet immediately if it has been exposed to hot or cold conditions. Instead, allow it to adjust
gradually to room temperature over a three to four hour period.
Please note that you must fully charge the battery before using your tablet.
Where to use your tablet
Your tablet will run well under most conditions but avoid extreme temperatures and humidity levels.
Allow sufficient air circulation around the computer when you are working indoors to prevent overheating.
Do not block the ventilation opening or place your tablet in direct sunlight.
There are some things you can tolerate that your tablet can’t – things like static electricity, dust, water, steam and
oil.



4

 
WARNING - Never try to disassemble or back engineer your tablet as we will not be responsible for any damage
caused if you do so and this action would void your warranty
Introduction
Your tablet features the latest advances in portable computing technology with a modular design that provides
maximum expandability without compromising portability.
Please note that some of the features mentioned in this manual might not be included on your tablet or may vary
slightly.
Unpacking your tablet
Your tablet comes securely packaged in a shipping carton. Please contact your supplier if you find that anything is
missing or damaged after examining the contents.
Do not throw the packaging materials away. You may need them later if you have to ship the computer.
What is in the box
Tablet PC



5

 
Power adaptor and cord (12v --- 4.16A)
LAN adaptor cable
Getting to know your tablet
Front View with Capacitive touch panel



6

 
Front View with Resistive touch panel



7

 
1. LCD Panel
This tablet is equipped with a 10.1” LCD display with a resolution of up to 1280 x 800
2. Speaker
Two Piezoelectric speaker
3. Front Camera
200MP, USB interface
4. Reset Function
Hall IC switch on handle(EC Control) – External magnet action



8

 
Right Side View
5. Wi-Fi Indicator & Power LED
5.1 WIFI Indicator
Lights up Green when the Wi-Fi device is turned on.
Light will flicking when data transferring
No light when Wi-Fi stops operation
5.2 Power Indicator
Blue: Connect to DC Power
No Light: No DC Power
Flash: System standby
6. Lock LED:ControlledbyPowerCrate
Device location U30 change of status White LED
Slid in to Power Crate Magnet in locking arm moving into
detection range of U30 2 second pulse white LED
Locked in Power Crate Magnet still in detected range OFF
Unlocked from Power Crate Magnet in locking arm Leaving
detection range of U30
Flashing(1 second on/1
second off) for 10 seconds
Removed Power Crate No Magnet detected OFF
Slid in to Power Crate the most of charging On
Note:WhenDeviceremovedfromPowerCrate,ECmustsetPCA9555PIN4to“High”



9

 
7. Battery Indicator
Status Red Amber GREEN
Charge(S0,S3,S5) 0%-40% Flash OFF OFF
41%-80% OFF Flash OFF
81%-100% OFF OFF Flash
No Charge (S0) 0%-40% ON OFF OFF 41%-80% OFF ON OFF
81%-100% OFF OFF ON
No Charge (S3,S5) 0%-40% OFF OFF OFF 41%-80% OFF OFF OFF
81%-100% OFF OFF OFF
Note: Battery charge current had 3 level can be selected. Low voltage charge: 0.368A; Normal Charge: 2A; Fast
charge: 4A. And the charge current behaviors selected base on customer requirement.








10

 
Rear View with 8000mAh battery



11

 
Rear View with 16000mAh battery
8. Lock hole
For Kingston locker



12

 
9. Rear Camera
Rear facing 5Mega Pixel with auto flash and LED flash
10. VESA Mounting
11. WIFI Logo
IEEE 802.11b/g/n/ Wireless card with WIFI Antenna
12. Kick stand
Integrated rear friction grip kickstand for use in both landscape & portrait orientation, with Indexing for portrait.



13

 
13. SIM Card Slot (not supported with Carbon X220 device)
Slot for fitting a SIM Card
14. Micro-SD Slot
Slot for fitting a Micro-SD card
15. DC Jack
DC jack port for charging the tablet (12V --- 4A).
16. Pogo connector (not supported with Carbon X220 device)
For changing the tablet when used with a docking station
17. HDMI / LAN
Mini HDMI for fast earth net (10/100) via HDMI to LAN cable.
18. USB 2.0 port
Mini USB 2.0 hidden port
19. 3.5mm audio Jack
For headphone insert.
20. Power Button
Power button to turn the tablet on



14

 
Packaging list
This product is shipped with the items list below. Please make sure that all are in Gift box.
¾ 1 piece of Rugged Tablet PC user manual
¾ 1 CD for Recovery CD for Operation System (Windows embedded standard 7)
¾ 1 piece of 12V Adapter w/ Standard Power Cord
¾ 1 piece of Mini HDMI to RJ45 (female) Adapter cable
¾ 1 piece of Mini USB to standard USB(female) adapter cable



15

 
Optional accessories
¾ Hand strap



16

 
Getting Started
This chapter guides you to get the X2 Carbon ready for operating.
Connecting the AC Power
Our tablet PC can operate either on the external AC power adapter or internal battery power. It is suggested
that you use AC power when you start up the tablet PC first time.
1. Plug the DC cord of the AC adapter to the power connector of the tablet PC.
2. Plug the female end of the AC power cord to the AC adapter and the male end to the power
electrical outlet.
Caution - Use only the AC adapter included with your tablet PC. Using other AC
adapters may damage the tablet PC.



17

 
3. When the AC adapter is connected, the Battery Pack is also charging. You can check the Battery
Status LED indicator to see the current progress. The indicator turns to green when it is fully charged.
Turning the tablet on and off
Turning on the tablet PC
1. Place your tablet PC on a flat and stable surface or holding the tablet PC on your hand.
2. Make sure that the tablet PC is either connected to AC power or the battery pack with
power.
3. Press the power button on the right side by 2-3 seconds to start it.
Turning off the tablet PC
Caution - When you disconnect the AC adaptor, disconnect from the electrical outlet first
and then from the tablet PC. A reverse procedure may damage the AC adapter or the tablet
PC When unplugging the connector alway
s hold the plug head Never pull on the cord



18

 
1. To turn off the tablet PC power, use the ‘Shut Down’ command on your operating system.
The optmised Use for Sunlight Readable Touch Screen
With the imposed reflective function, the modified LCD can reflect the ambient light passing the LCD cell and
utilize the reflected light beams as its illumination. The stronger the ambient light is, the brighter the LCD will
appear.
As a result, the modified LCD is viewable under lighting conditions.
The optimised angle of view is forty-five degrees. The optimised viewing distance is 30cm.
Caution - If you have to turn the tablet PC on again immediately after turning it off, wait
for at least five seconds. Turning the tablet PC off and on rapidly can damage it.



19

 
Caution - Although transflective LCD is mainly used in outdoor
environment and it may increase the reflective lights under sunlight, it is suggested that you
should keep the LCD in an appropriate temperature for operation and storage, and avoid
direct sunlight if possible. To ensure the transflective LCD works stably, 0~50°C (32-121°F)
operation and storage temperature is suit



20

 
Specification
Component Description
Dimension 325.0mm(L)x197.3mm(W)x27.8mm(D)
Processor Intel Cedarview-M N2600 Dual-core 1.6GHz
Chipset Intel NM10(Tiger point )
LCD panel 10.1” Toughened Screen (LVDS), 1280 x 800 WXGA 16:10 Aspect Ratio, 350CD/m2, IPS
Touch panel 10 Multi Capacitive touch panel and single Resistive touch panel, Surface Hardness 7H and IK08 compliant,
Memory 2G DDR3 (expansion 4G DDR3) – On board BGA memory module
M-SATA 16G, up to32GB m-SATA SSD
Card Reader Micro SD reader 8G- 32GB by Secure digital MSD card not provided
WI-FI IEEE 802.11 b/g/n Wireless card (Intel N6205, 2 antennas )
Speaker 2x Piezoelectric speaker, 95dB/ 5cm;
G-sensor Automatic screen orientation
Fan 45*45*5mm, 5V, 5200RPM, 27dB noise (type)
Rear I/O 1 mini USB; 1*Micro SD; 1*3.5mm audio Jack; 1*mini HDMI; 1* SIM Slot; 1*DC Jack;
Pogo connector 2x6pin, with DC IN, IIC, USB, LAN(10/100M), optional 2x4pin, with DC IN, IIC
Battery 8000mAh/16000mAh @ 7.4V(fast charge option)
Reset function Hall IC switch on handle(EC Control) – External magnet action