
■Assemblage orders and methods can vary from person to person. The color and parts of products may probably
be altered in order to provide beer products.
■End treang to prevent hurng hands has been made on secons of chassis in computer case. However, please be
careful about untreated parts. Please wear gloves or other supplies to protect your hands when you take an
assemblage. Main Board Installaon Posion
Special Screw For Assemblage
Special screw forHDD
Special screw forM/B,SSD,CD-ROM
Special screw forpower supply,graphic card
Installable Main Board
M/B hexagon M/B hexagon M/B hexagon
Supportscrewsupportscrewsupportscrew
installaonhole
M/B hexagon M/B hexagon
M/B hexagon
Supportscrewsupportscrewsupportscrew
installaonhole
M/B hexagon M/B hexagon
M/B hexagon
Supportscrewsupportscrewsupportscrew
installaonhole
※USB3.0on boardcable
connecon method
Connect directly USB3.0on board cable
in inner port of main board to on board
header port.
NOTICE !
Simultaneous connecon to USB2.0
cable separated from USB3.0on board
cable is not allowed.
Main Board
Assemblage
Method
Power Supply
Assemblage Method
Special screw for M/B
Main board
M/B hexagon
Support screw
Install main board I/O shield at the back of case.
Aer aligning holes of hexagon support screw and main board
screw of case, use special screws for main board to assemble.
6main board support screws are basically
installed at the case. Based on main board
specificaon, it is able to chooseneeded support
screws to use in combinaon.
Specialbracket for power
supply assemblage
Back
Assemblage posion of power supply
is at opposite side of chassis
Specialbracket assemblage
for power assemblage
①Confirm special screw for power supply. (hexagon screw)
②Confirm installaon posion of power supply at back on right side of case.
③Dismantle special bracket for power assemblage of basic seng.
④Put power supply’s fan adown.Then, push it to assemble.
⑤Reinstall dismantled special bracket for power assemblage.
⑥All installed power supply need special screws for power supply to assemble.
Power supply
assemblage
HDD &SSD Mul Guide Assemblage Method
SSDAssemblage Method
Graphic CardAssemblage Method
Installaon Posion Of Upper Cooling Fan&Water-Cooling Cooler
①Confirm HDD bay at the right side of chassis firstly. Then, dismantle
HDD assemblage guide on HDD bay which is basically set.
②Aer catching two sides of HDD assemblage guide and opening,
align HDD fixed frame with HDD. Then, installaon can be started.
③Aer guide whose HDD is assembled is connected to bay, then, push
it forward. And installaon can be started.
④There are screw holes that can assemble SSD at the center of mul
guide. The special screw holes can be used to assemble SSD.
①Confirm special screw for SSD
②Confirm place of SSD screw hole of SSDinstallaon spaceat right
side.
③Aer aligning SSD with SSD screw hole, use special screws of SSD
for right installaon.
① Confirm special screws for graphic card
②Aer confirming installaon place of graphic card, remove PCI slot
guide.
③Align graphic card with PCI slot for right installaon.
④Installed graphic card requires matched special screws to be
assembled on PCI slot.
240mm (120mm dual) all-in-one water-cooling cooler
can be installed.
2 120mm fans at most can be installed at upper end.
240mm(120mm dual) all-in-one
water-cooling cooler can be installed
PCI slot
Graphic card
Front
Connector’s connecon
direcon
Connector’s connecon
direcon
HDD fixed frame HDDfixedframe
screwhole for SSD
assemblage
screwhole for
SSD assemblage
screwhole for SSD assemblage
HDD fixed
frame
Connector’s
connecon direcon
X2PRODUCTS.COM X2PRODUCTS.COM