Xenon FEVER DEFENCE User manual
ASSEMBLY INSTRUCTIONS
PARTS LIST
A - Centre Column
B - Base Unit
C - Display/Camera Unit
D - Power Lead
1.
Unscrew 3 bolts on bottom
side of centre column
Remove 4 screws from top
of centre column cap
2.
1
2
3
4
Insert cables of base unit through side
aperture of centre column
Insert 3 xing bolts through baseplate to
attach centre column
Insert centre column into opening on base
plate being careful not to pinch cables
Remove lockring from display mounting
bracket
3.
5.
4.
6.
Insert display bracket into top of centre
column cap and x securly with lockring
Fit monitor assembly to top of centre
column and x with 4 screws removed in
step 2. Ensure display and centre column
LED strip are aligned correctly
Insert cables as follows: A- Power input
from base (2 leads) to LED strip and
Display. B- Network Cable from Base to
Display. C- 2 x Centre Column USB ports
to display USB Ports.
Adjust angle of display by loosening collar
on top of bracket
7.
9.
8.
10.
Insert 12v power lead to baseplate to
power on
11.
