Xiaomi Redmi Note 13 5G User manual

Redmi Note 13 5G
Quick Start Guide
To view the user guide, scan the QR code.

SAT. 16 AUG.
02
48
Volume
Buons
Power
Buon
USB Type-C Port
Nano-SIM
Nano-SIM
Nano-SIM
Micro SD

Thank you for choosing Redmi Note 13 5G
Long press the power buon to turn on the device.
Follow the on-screen instructions to configure the device.
For more information, visit our official website:
www.mi.com/global/service/userguide
MIUI
Redmi Note 13 5G comes pre-installed with MIUI, our customized Android-based OS
which provides frequent updates and user-friendly features based on suggestions from
over 200 million active users worldwide. For more information, please visit en.miui.com
About SIM:
Please do not insert non-standard SIM cards into the SIM card slot. They may damage
the SIM card slot.
WARNING: Do not disassemble this device.
5G connection depends on country, carrier, and user environment.
RF Exposure Information
This mobile phone has been designed to comply with applicable safety requirements
for exposure to radio waves as per the relevant Indian SAR standard (refer to Office
Memorandum No.18-10/2008-IP, Government of India, Ministry of Communications and
IT, Department of Telecommunications, Investment Promotion), which state that the
SAR level for mobile device shall be limited to 1.6 Wa/Kg, averaged over a mass of 1
gram of body tissue.
Usage advice
It is recommended to use a wireless handsfree system (headphone, headset) with a
low-power Bluetooth emier when making a call.
It is recommended to use a mobile device with a Specific Absorption Rate (SAR) that
complies with the applicable safety requirements.
For children, adolescents and pregnant women, it is recommended to keep each call
short or to send a text message instead.
Use the mobile device in an area with good signal quality.
For persons utilizing active medical implants, it is recommended that the mobile device
be kept at least 15cm away from the implant during use.
Important safety information
India SAR 1 g limit: 1.6 W/Kg,
SAR Head: 0.854 W/Kg, Body: 0.710 W/Kg.
E-Waste
Xiaomi products are in conformity with the requirements of the reduction of hazardous
substances of the E-Waste (Management) Amendment Rules, 2018.
The content of hazardous substance with the exemption of the applications listed in
SCHEDULE II of the E-Waste Rules:
1. Lead (Pb) – not over 0.1% by weight;
2. Cadmium (Cd) – not over 0.01% by weight;
3. Mercury (Hg) – not over 0.1% by weight;
4. Hexavalent chromium (Cr6+) – not over 0.1% by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.
For E-Waste information, please refer to the link below:
www.mi.com/in/service/recycling_guide
WEEE
For the purpose of recycling to facilitate effective utilization of resources,
please return this product to a nearby authorized Collection Centre,
registered Dismantler or Recycler, or Xiaomi Service Centre when
disposing of this product.
What the Wheelie Bin symbol means: the symbol says don’t dispose of
your E-Waste into the municipal waste collection bins. That’s because
these wastes are hazardous in nature and need to be recycled in a special way.
How to dispose of this product
Carry it to nearest service centre of Xiaomi OR Call the Toll Free Number: 1800 103 6286
OR Write to us on [e-mail]
Instructions of handling the product during and aer its use and Do’s and Don’ts with
respect to handling the product;
Do’s:
a. Always look for information on the catalogue with your product for end-of-life
equipment handling.
b. Ensure that only Authorized Service Personnel / Service Center repair and handle
your electronic products.
c. Always call Authorized E-Waste Recyclers to dispose of products that have reached

end-of-life.
d. Always drop your used electronic products, baeries or any accessory when they
reach the end of their life at your nearest authorized E-Waste Collection Centre /
Collection Point.
e. Wherever possible or as instructed, separate the packaging material according to
respective waste disposal options and sort for recycling.
f. Always disconnect the baery from product, and ensure any glass surface is
protected against breakage.
g. Charge this device only with the included or Xiaomi authorized cable and power
adapter. Using other adapters may cause fire, electric shock, and damage the device
and the adapter.
Don’ts:
a. Do not dismantle your electronic products on your own.
b. Do not throw electronics in bins having “Do not Dispose” sign.
c. Do not give E-Waste to informal and unorganized sectors like Local Scrap Dealer/
Rag Pickers.
d. Do not dispose your product in garbage bins along with municipal waste that
ultimately reaches landfills.
Operating Temperature: 0 °C - 40 °C
Install the adapter near the device in an easily accessible position.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
For more important safety information, please refer to the link below: www.
mi.com/en/certification
E-label
This device has an electronic label for certification information.
To access it, please go to Seings > About phone > Certification, or open Seings and
type “Certification” into the search bar.
Disclaimer
This User Guide is published by Xiaomi or its local affiliated company. Improvements
and changes to this User Guide necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or equipment may be made by
Xiaomi at any time and without notice. Such changes will, however, be incorporated
into new editions of this User Guide. All illustrations are for reference purposes only
and may not accurately depict the actual device.

XIAOMI WARRANTY NOTICE
This limited warranty shall apply to Xiaomi products.
For handsets and accessories defects under normal use circumstances and at
the discretion of the company, Xiaomi shall provide free of charge repair and/or
replacement services within the warranty period.
Handsets Limited Warranty
Warranty Period Scope of Warranty Warranty service
Hardware product 1 year
Labor and parts Carry in
Xiaomi original baery,
charger and other
accessories packaged with
the product
6 months
• The Limited Warranty starts from the day the customer receives the product, limited
to 10 days from the date of invoice.
• During the warranty period, if any accessory defect is inspected and confirmed by
Xiaomi authorized service center, free replacement service shall be provided.
1. This limited warranty is only valid in India, and the product is not eligible for any
international warranty service. To the fullest extent permied by law, warranty
service only be performed by Xiaomi or Xiaomi authorized service centers.
2. Xiaomi may conduct diagnostic tests on customers’ products to identify the causes
of failures / defects. Before returning any unit for service, customer should back up
data and remove any confidentialand/or personal information from the product.
Xiaomi is not responsible for damage or loss of any program, data, or removable
storage media.
3. Prior to contact Xiaomi service agent, please ensure the following information
is at hand:
-Model, serial number, and IMEI number if available.
-Customer’s full address and contact information.
-Purchase order number, a copy of the customer’s original invoice/receipt.
4. This warranty does not cover the following cases:
-The product serial number, IMEI number or warranty seal is illegible or has been
removed, erased, defaced, altered, and/or tampered. Any accessory or external
part of the product has been missing.
-Any damage occurs in/on outer surface of the product, including but not limited
to cracks, dents or scratches on the exterior cases, screens, camera lenses,
buons and other aachments.
-General maintenance, password reset assistance, cleaning, application update/
installation, product demonstration, or any other service other than repair/
replacement.
-Deterioration of the product caused by normal usage and tearing, including but
not limited to rust or stains.
-Any other circumstances that are contradictory or are not in compliance with
business ethics.
-Damages caused by running soware not supplied along with, or
unauthenticated APKs may cause hardware to fail in rooted/unlocked devices,
such damages shall be verified by Service engineers to decide on applicability
of warranty.
5. Xiaomi will determine whether a product is “Out of Warranty” at the company’s
discretion according to the standards listed below. Repair of Out of Warranty
products shall be separately quoted by the Xiaomi service center and respective
service shall be provided upon service fee payment.
-Violation of the warranty terms, invalidate warranty, expired warranty, or other
reason.
-During the warranty period, in the event of violation which defined as customer
induced damage, such as self-repairs, exposure to water, damage caused by
misuse, alternation, failure to comply with product manual, etc.

Handsets Defects List
Item Performance Defects
Mobile Phone
Screen failure including no display /
abnormal display
Phone does not start, unable to log or
make calls
Phone does not vibrate or ring
Abnormal shutdown
Poor contact with SIM cards
Buon failure
No sound or abnormal sound volume
Shell crack damage due to structural or
material factors
Charger The orginal charger doesn’t work
Baery Mobile phone doesn‘t work aer full
charge or does not accept charge
Data Cables Does not work
For more detail, please call hotline: [phone]
Official Website: www.mi.com/in
Service Email Address: [e-mail]
Twier: @miindiasupport
Xiaomi Communications Co., Ltd.
Brand: Redmi Model: 2312DRAABI
© Xiaomi Inc. All rights reserved.

本页内容为工艺说明文字，不包含在印刷品中
料号/item no: XXXXXXXXXX**
版本/version: A
物料名称 XX 入门指南 印度版
Material description xx Quick Star Guide India version
图纸发布日期/artwork issue date：YYYY年MM月DD日
材料/Paper use of user guide:
105g 无光铜/105g C2S(coated two side) matt art paper
正背哑油/water-base matt varnish on front/back side
尺寸/Size
单页/folding:65X140mm
基本印刷工艺/Printing requirement
PANTONE Cool Gray 11C
装订方式/blinding
折页/folding
封面封底5
432
(1)(6)
封面
5
Back
cover
cover
cover
其他特殊注意事项/Other special precautions：
请供应商根据规定印刷料号，并仔细核对/Please print the part
number according to the regulations and check carefully：
1，Datamatrix码尺寸/Datamatrix size：6X6mm
2，扫码显示格式为/The scan code display
format：XXXXXXXXXXXXA