Xilica Audio Design POE08 Series User manual
USER GUIDE
PoE & Optical Transmission
POE08 Series
Statement
Technical Structure and Port Description
Copyright @ 2002-2018 Our company,All Rights Reserved
!
Packing List
Please kindly check the following items:
1 xPoE switch
Power Cable
Mounting Kits
1x User Guide/ Warranty Card
Note If any shortage or damage found, please contact us in time.
This document contains proprietary information that is protected by copyright. No part of this document
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language,
in any form or byany means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise
without the prior written permission of Our company.
The information and product specifications within this document are subject to change at any time, without
notice and without obli-gation to notify any person of such change.
Product Overview
POE08 series has 8x Rj45 Ethernet ports that compliant with 10/100/1000
BaseT, 802.3af(PoE)and802.3at(PoE+), and 2x gigabit SFP ports. This switch can offer power over
Ethernet to network weatherproof IP camera with wipers and heater, high performance wireless AP,
industrial VoIP phone or other PoE supported equipments, flexible for applications. SFP fiber optic
port transmission distance can be up to 120KM, with high resistance to electromagnetic
interference.
IEEE802.3 10BASE-T Ethernet, IEEE802.3u 100BASE-TX fast Ethernet, IEEE802.3ab
1000 BASE-T gigabit Ethernet;
Support IEEE802.3X , and Backpressure full/ half duplex flow control;
Note
Features
!The product ‘Switch’ mentioned in the manual, if without a special request, it is referring to POE08
PoE switch, PoE switch or switch in short in below.
Product Introduction
Has 10/100/1000M auto-sensing Rj45 ports, supporting PoE;
All ports support auto MDI/MDIX;
Max port power is up to 15.4W(af) or 30W(at);
Only feed power to IEEE802.3af/IEEE802.3at compliant devices;
A
BC
AC/IN 1 00- 240 V
D
A. PoE Port C. SFP ports
B. CONSOLE Port D. 100-240VAC, 50/60Hz
G9 G10
F F
G1 G3 G5 G7
G2 G4 G6 G8
POE 08
Power over Ethernet Switch
8 Ports 1 0/100 /1000 Mbps + 2G S FP PoE Swi tch
G9 G10
F F
G1 G3 G5 G7
G2 G4 G6 G8
POE 08
Power over Ethernet Switch
8 Ports 1 0/100 /1000 Mbps + 2G S FP PoE Swi tch
Panel Description Installation Guide
Application Connection Diagram Models Description
!
(Please install to the supported devices)
Installation
Please confirm the following things before installation:
1. If the POE port meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(1/2+、3/6-( End -span)/ 4/5+、7/8-(Mid-span))
3 .If the output power of the matched power adapter is compatible with the specification in the
label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table, or professional installation rack mount.
2. Connect Positive, Minus and Earth terminals as indicators on the power adapter.
3. Connect the network devices to the POE switch port though network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation
environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically
initialize, and LED lights status will display as following:
1. Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which
means the system restoration is successful.
2. Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!Note
Note：Please confirm that the all PoE ports of PD devices are complying with IEEE802.3af/at standard.
!
Power: 48 VDC (46 ~57VDC),(More than 50VDC recommended when used PoE+ output)
PoE Port: The PoE ports support PoE function, which can transmit data and power simultaneously if connected
matching device. The LED lights on the front panel can show working status of each port.
Indicator Status Description
System Indicator:
SYS
Green LED Blink
System work as normal (POE33108PFM only)
PoE Indicator : PoE
Link Indicator: Link
Green LED OFF System abnormal or power off
Green LED ON Connected PD device, powering properly
Green LED Blink Short circuit or current overload
Green LED OFF No connected PD or power off
Yellow LED ON Data transmission properly
Yellow LED Blink Connection is OK and data is being sent and received
Yellow LED OFF No connected device
Green LED ON
Green LED Blink
Green LED OFF
Data transmission properly
Connection is OK and data is being sent and received
No data connected
SFP Uplink Indicator
Green LED ON
System work as normal (POE33108PF only)
WAN
Wide Ar ea Networ k
G9 G10
CONSOLE
FF
115200,N,8,1
G1 G3 G5 G7
G2 G4 G6 G8
PoE 08
Power
Non-PoE IP Cam era
Cat.5e/6
Cat.5e/6
PoE ( data+po wer)
POE08: Ethernet unmanaged PoE switch,8x 10/100/1000M RJ45,PoE ports+ 2x 100/1000M SFP slots,
1-8 ports support PoE, IEEE 802.3af, RJ45 ports transmission distance, is 100 meters, transmission distance
of optic fiber port with SFP module can be up to 2-120KM.
Cat.5e/ 6
POE 08
Power over Ethernet Switch
8 Ports 10/100/1000Mbps + 2G SFP PoE Switch
Table of contents
