Xomax MB-01EU User manual

User manual
ENGLISH
CAR NAVIGATION SYSTEM
MB-01EU

2
MB-01EU
CAR NAVIGATION SYSTEM
User manual
MB-01EU
Thank you for purchasing one of our MB-01EU products! We appreciate your
condence. Enjoy your brand new multimedia unit!
Please read the following manual carefully before you install and use the unit.
Please save this manual in case you will need to clarify further possible ques-
tions regarding installation and usage of our product.
We are constantly trying to keep our online-library of user's manuals for our
products up-to-date. In case you miss some information or if something should
be unclear, please visit our homepage www.xomax.de/download for a current
version of user's manual or contact our customer service.
i
Version 1.1
Last update 19.09.2016
Manual's version
We appreciate our environment, so to keep it safe and clean, we
do not print our manuals on paper but provide our products with
manuals in digital version created in *.pdf format.
You can nd and download them anytime on our homepage
www.xomax.de, view them on your mobile devices and print
them for yourself if needed.
Please note: Any alternations and changes of technical data or/and design
due to technical update of some models need no advertisement.

3
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
List of contents
List of contents
Safety instructions and precau-
tions 4
Specications 6
Package content 7
Installation 8
Installation notes ............................ 8
Before the installation ..................... 8
Connection schedule –
ISO plug 10
MB-01EU kabel adapter
plug pin assignment 11
MB-01EU ISO socket pin
assignment 12
Connection schedule – Cinch
multicore 13
Startup operations 14
Usage of the remote control ............14
Replacement of the battery .............14
Unit on/off ....................................15
Insert a micro SD card ...................15
Insert a USB ash drive ..................15
Remote control 16
Menu setup 17
Common solutions 27
Recycling of an old unit 29
Recycling of the battery 29

4
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Safety instructions and precautions
Safety instructions and
precautions
!
Handling by stop only
To avoid any accidents please don't
handle the unit while you driving.
Please stop and park the vehicle
at safety place and handle the unit
casually.
!
Installation
Please read the following manual
carefully before you install the
unit. We recommend you to let the
technician install the unit in your
vehicle.
!
Regular loudness
Please set the loudness of the unit
to the appropriate level so you were
still able to hear exterior noises
especially trafc warning signals.
Furthermore the higher loudness
level can damage your hearing
organs.
!
Repair of the unit
Do not open the unit. Do not try to
repair the unit by yourself due to
any emerging technical problems.
While opening the unit by yourself
exists the danger to be electrocuted.
Do not use the unit any further since
you detect any kind of technical
problems.
Leave all the repair operations to
professional technicians.
Due to awed warranty seal the
warranty becomes invalid.
!
Power supply
Use the unit connected only to 12 Volt
on-board power supply. The minus (-)
should be connected with the ground
(GND) (negative).
Due to the wrong conguration exists
the danger of re. In case of doubt
please consult with professional techni-
cians.
!
Replacement of fuses
While replacing the fuse please make
sure that the new fuse has the same
properties as the old one, especially the
amperage.
!
Overheating
Do not occlude the vent holes to avoid
the heat generation and accumulation
in the unit. Otherwise exists the danger
of re.
!
Regular temperature
Please make sure that the temperature
inside of the vehicle amounts to not
more than +60 C.
If it's too hot inside of the vehicle, do
not turn the unit on until the inside
temperature of the cabin descends.

5
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Safety instructions and precautions
!
Cleaning of the unit
Please keep the unit clean and remove
the dust from it regularly. Please use for
that a soft and dry cleaning rag.
Major soilings can be removed carefully
with the wet cleaning rag. Do not use
any chemical or alcohol-containing
detergents to avoid the damage of the
unit's varnish.
!
Usage of the touchscreen
Do not press the touchscreen too hard
– it may lead to image distortions, unit
malfunctions and touchscreen damages.
Do not use any sharp articles to use
the touchscreen. Please handle the
touchscreen with your nger or with the
appropriate stylus.
!
Moisture
To avoid the danger of re or the
electric shock do not put the unit in to
the moist environment (e.g. adverse
weather conditions, inappropriate wet
cleaning etc.)
!
The risk of injuries
Do not open the cabinet or modify
the unit. The active laser components
used with this product comply with the
provisions of Laser Class 1.
!
Handling the CDs and DVDs
»Soilings, scratches, dust can impair
the playback and damage optical
lenses.
»Do not label CDs/DVDs with an
inappropriate stickers and markers.
»Do not ever bend the disc.
»Store the discs in an appropriate
sleeves to avoid damages of the media.
»Do not expose discs to direct sunlight.
»Do not touch the mirror surface of
the disc to avoid the soilings such as
ngerprints.

6
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Specifications
Specifications
Common data
Operating voltage ............................ 12V DC
Fuse ................................................... 15 A
Instalation size ........ 2DIN - Mercedes specic
Audio
Output power ............................ 4 x 60 Watt
Loudspeaker impedance ............. 4 bis 8 Ohm
Frequency range ................... 20 Hz - 20 KHz
S/N ratio ........................................... 85 dB
Stereo channel separation ................... 80 dB
Display
Diagonal ............................... 7 Zoll (18 cm)
Resolution ........................... 800 x 480 Pixel
TYP ................. TFT LCD Touchscreen Display
FM-tuner
Frequency range .................. 87.5 - 108 MHz
FM sensibility ....................................... 5 dB
S/N ratio .......................................... 60 dB
IF frequency .................................. 10.7 MHz
Stereo channel separation ........ 30 dB (1kHz)
AM-Radioempfänger
Frequency range .................. 522 - 1620 KHz
AM sensibility ..................................... 28 dB
IF frequency ................................... 455 KHz
USB1-port (front)
Plug type ............................. Typ A, miniUSB
Max. supported volume ..................... 128 GB
File system ................................exFat, Fat32
USB2-port (back)
Plug type ................................... Typ A, USB
Max. supported volume ..................... 128 GB
File system .............................. exFat , Fat32
SD-card slot
Slot typ ....... MicroSD, MicroSDHC, MicroSDXC
Max. supported volume ..................... 128 GB
File system .............................. exFat , Fat32
Bluetooth
Version ..................................... 2.0 Class 2
Prole ............................ Freisprechen, A2DP
Frequency ........................ 2.4GHz Spektrum
Any alternations and changes of
technical data or/and design due
to technical update of some mo-
dels need no advertisement. Errors
expected.

7
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Package content
Package content
Please check the accessories on
completeness:
1. car radio
2. GPS-aerial
3. Navigation software (MicroSD card)
4. Can-Bus
5. ISO cable adapter
6. USB extension cable
7. cable adapter
8. cable adapter
9. remote control with battery
10. universal antenna splitter
11. mounting accessories
12. installation manual
The images serve as example. Optically the may vary from the original.
Please note: the package content
may vary due to technical updates.
i

8
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Installation
Installation
Installation notes
Here you can nd relevant installation
notes and common information.
Before the installation
WARNING!
Please read the following manual
carefully before you install the unit.
Damages caused due to an inappro-
priate installation will not be
covered by warranty.
If you do not want to risk your
warranty entitlement, please let
the technician install the unit in
your vehicle.
»To avoid a short circuit please
disconnect the vehicle battery before
the installation. To do it properly please
The detailed installation manual
you can nd on our homepage www.
xomax.de.
The printed version of a common
installation manual you can nd in
the package.
i
!
read the manual of your vehicle.
»Make sure that your vehicle is
equipped with a car radio slot of
required size (2DIN)
»As may be the case you will need
a suitable faceplate, adapter or other
accessories. These could be provided
from your local specialist supplier.
»The connection cables may not be
cutted or short-circuited. Otherwise the
warranty becomes invalid.
»Before the installation please make
sure that your vehicle has the 12 Volt
on-board power supply.
»The minus (-) should be connected
with the ground (GND) (negative).
»Please tag the polarity of the avai-
lable speakers before you disconnect
the vehicle battery.
»A proper grounding of the unit's
housing requires a clean ground
connection. Thus the grounding area
should be rust-, stain- and dust-free.
»Please ground the cable separately
from other heavy current devices such
as an amplier etc.
»Please ensure that the colored cables
are connected according to the wiring
diagram. The wrong wiring may lead to
malfunctions or even damages of the
electric elements of the vehicle.
»Please note that the connection
cables of this unit and of the other
devices may have the same purpose
Wir empfehlen, die Installation
von einer fachkundigen Person oder
einer Fachwerkstatt durchführen zu
lassen.
!

9
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Installation
but the different color. For this reason
while connecting this unit with the
other devices please ensure that both
of the cables in each case have the
same purpose. To connect everything
correctly please refer to the manuals of
the both devices.
»Please ensure that the negative
speaker cable is in each case connected
with the negative speaker terminal of
the ISO port. Do not ever connect the
negative speaker cables with the vehicle
body.
»This unit is designed and construed
for connection with 4 speakers. Do not
combine this unit with devices that are
designed and construed for connection
with 2 speakers.
»The speakers should feature the
impedance of 4-8 Ohm and a sufcient
wattage.
»Please ensure that the speakers you
are connecting with the unit are intact.
Damaged speakers can impair the unit.
»To avoid a short circuit please isolate
all cable junctions and endings of the
unused cables with the electrical tape.
»All the cables should be layed and
xated tidy and properly. The cables
should not contact any movable or hot
objects.
»If your vehicle doesn't have an "ACC"
ignition position, please connect the red
cable with the ignition switch. Other-
wise the unit will not turn off automati-
cally, causing the discharging of the
vehicle battery.
»To avoid a rogue and hazardous
short circuit do not lay the yellow cable
through the engine bay in order to
connect it with the vehicle battery.
»Do not ever connect speaker cables
among one another. In case you do not
want to connect all the 4 speakers with
the unit please isolate the endings of
unused cables with the electrical tape
to prevent a short circuit.
»Do not ever connect the negative
speaker cables with the vehicle body.
»To ensure a awless performance of
the unit the intergration angle should
amount to +/- 30.

10
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Connection schedule – ISO plug
Connection schedule – ISO plug

11
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
MB-01EU kabel adapter plug pin assignment
MB-01EU kabel adapter plug pin assignment

12
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
MB-01EU ISO socket pin assignment
MB-01EU ISO socket pin assignment

13
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Connection schedule – Cinch multicore
Connection schedule – Cinch multicore

14
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Startup operations
Replacement instructions:
1. Remove the battery compartment:
push it to the left rst, then pull it out.
2. Remove the old battery and insert
the new one (CR-2025 Lithium).
3. Insert the battery compartment back
into the remote control till it clicks into
place.
Startup operations
Usage of the remote control
Before the rst usage please remove
the isolation plate.
Aim the remote control at the IR
receiver on the front operating panel.
The IR receiver should not be blocked.
As soon as the remote control does
not work proper the battery should be
replaced.
Do not expose the remote control to
direct sunlight or air heater.
Replacement of the battery
The remote control is operated by
CR-2025 Lithium battery.
As soon as the remote control does
not work proper the battery should be
replaced.
!

15
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Startup operations
Unit on/off
Press the ? button to turn the unit
on.
If the unit is already on, keep the ?
button pressed for a couple of seconds
to turn it down.
Insert a micro SD card
Insert a micro SD card into the slot with
the label side up and the pin side down.
Make sure that the card is intact and
dirt-free.
Insert a USB flash drive
Insert an USB ash drive proper into a
USB plug.
Do not insert any heavy or big USB
ash drives in order not to hit it
accidently - it could cause damages of
the USB plug or USB ash drive.
Micro SD cards and USB ash
drives should have following le-
system format: exFat or Fat32. Other
types will not be supported.
i

16
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Remote control
Remote control

17
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Menu setup
Menu setup

18
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Menu setup

19
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Menu setup

20
MB-01EU
CAR NAVIGATION SYSTEM
EN
Thema:
Menu setup