XPENG G3i 2022 User manual

User Manual

Preface
1
XPENG G3i is designed to be a smart EV different from ordinary vehicles. Before using
it, please read through this manual to understand its basic information, operating
instructions and related warnings & cautions. If you have any questions regarding the
use of the vehicle, please contact your local authorized service center.
This manual was published in March 2022. Contents marked with "*" in the manual are
for illustration purpose only. Actual features and functions of XPENG G3i may vary due
to OTA update, so please note that:
Please pay special attention to the warnings and cautions in the manual to ensure
proper operations and driving safety.
XPENG Inc. always reserves the right to change, supplement, or terminate the contents
and technical specifications of this manual.


Table of Contents
3
1. Notice to XPENG Owners....7
Safety Instructions................................ 7
EV System Layout ................................. 8
Traction Battery .................................... 9
Charging Instructions ......................... 10
2. Pre-Use Preparation
(Exterior Equipment) ..........17
Appearance Introduction ................... 17
Bluetooth Key..................................... 18
Doors ................................................. 20
Tailgate .............................................. 23
Rear Trunk Cover ................................ 26
Front Hood ......................................... 27
Exterior Rear-View Mirrors.................. 28
Roof Rack Interface ............................ 30
Interior Introduction ........................... 32
Steering Wheel................................... 34
Interior Rear-View Mirror.................... 37
Mobile Phone Wireless Charging........ 38
Interior Door Handles......................... 40
Windows ............................................ 40
In-Vehicle Power Interface ................. 42
Reective Vest.................................... 44
Dashboard ......................................... 45
Indicator Lights .................................. 47
Exterior Lights .................................... 51
Interior Reading Lights....................... 55
Wipers and Washers........................... 56
Low-Speed Warning Sound................ 58
3. Stable Driving..................59
Vehicle Power On/O......................... 59

Table of Contents
4
Start the Vehicle ................................. 61
Gearshift ............................................ 62
Driving Mode...................................... 64
Energy Regeneration.......................... 65
Interior Air Conditioner....................... 67
Front Seats ......................................... 69
Rear Seats .......................................... 73
Ride with Children.............................. 75
Child Locks ......................................... 84
4. Safe Driving.....................85
Seat Belts ........................................... 85
Seat Belts with Collision Warning ....... 86
Airbags .............................................. 91
Electronic Parking Brake (EPB)............ 94
AutoHold............................................ 96
Electronic Stability Program (ESP) ...... 97
Traction Control System (TCS) ............. 97
Anti-Lock Braking System (ABS).......... 98
Electronic Brakeforce Distribution
(EBD) .................................................. 98
Hydraulic Brake Assist (HBA)............... 99
Emergency Brake Alarm ..................... 99
Hill Descent Control (HDC)................ 100
5. Center Information
Display (CID)......................101
Interface Introduction....................... 101
Bluetooth music ............................... 103
System Settings................................ 104
Vehicle Settings................................ 106
6. XPENG APP ....................110
Download and Use........................... 110

Table of Contents
5
Car Control with Xpeng App ............. 111
7. XPILOT Driving................114
Radars.............................................. 114
Cameras........................................... 116
Xpilot Parking System....................... 118
Parking Radars................................. 119
Around View Monitor (AVM) ............. 122
Forward Collision Mitigation............. 123
Lane Departure Assist ...................... 127
Emergency Lane Keeping (ELK) ........ 130
Blind Spot Security ........................... 132
Speed Assist System (SAS)................ 134
Rear Cross Trac Alert (RCTA)........... 137
Door Open Warning (DOW)............... 139
Intelligent Parking Assist .................. 142
Intelligent Parking out Assist ............ 146
Super Intelligent Parking Assist
(With Voice Control Intelligent
Parking Assist).................................. 148
Adaptive Cruise Control (ACC) .......... 149
Lane Centering Control (LCC)............ 157
XPILOT Intelligent Driving
Simulation Display System ............... 162
8. Maintenance .................164
Traction Battery Maintenance........... 164
Charging Port House Cleaning ......... 164
Tire Maintenance.............................. 165
Use of Snow Chain ........................... 173
Exterior Cleaning.............................. 174
Interior Cleaning .............................. 177
Check Traction Battery Coolant ........ 179
Check Motor coolant ........................ 180

Table of Contents
6
Check Heating Coolant .................... 181
Check Brake Fluid ............................ 182
Rell of Windshield Washer Fluid ..... 183
Replacement of Key Battery ............. 184
Parts and Modication ..................... 185
9. Vehicle Specications....186
Vehicle Identication Number (VIN) . 186
Product Nameplate .......................... 187
OBD diagnosis interface................... 188
Drive Motor Model and Code............ 189
Labels .............................................. 189
Exterior Dimensions ......................... 192
Weight.............................................. 193
Overview Parameters ....................... 194
Steering Gear ................................... 194
Parameters of the Powertrain........... 195
Suspensions..................................... 196
Braking System................................. 196
Oil/Fluid Filling Volume.................... 197
Four-Wheel Alignment Parameters .. 197
Tire ................................................... 198
Microwave Window .......................... 199
Event Data Recorder (EDR) ............... 199

1
2
3
4
5
6
7
8
9
10
11
7
1. Notice to XPENG Owners
Safety Instructions
With the focus on safety, XPENG is committed to creating
a better mobility experience for customers. XPENG Owners
should follow the safety instructions to drive carefully when
getting familiar with the features of this vehicle.
Guidelines for Handling Traffic Accidents
If your vehicle has suffered severe damage in an accident, to
ensure your personal safety, please follow the instructions
below:
●Do not touch any High Voltage wiring harness or High
Voltage component in the vehicle, or it will cause
electrical injuries.
●Do not touch any leaked fluid.
●Do not attempt to inspect the vehicle by yourself.
●If you need to have the vehicle towed, contact your local
authorized service center.
●When the vehicle has been damaged by flood, do not
power it on again. Because short circuit may occur in the
battery pack. To avoid personal safety risks or secondary
damage to the vehicle, contact your local authorized service
center as soon as possible to check the battery system and
have the damaged battery assessed by professionals.
●If the vehicle smokes or catches fire, run far away from
the vehicle and call the police as soon as possible (you
should inform the police that the vehicle is a pure electric
Vehicle). Contact your local authorized service center for
further handling advice.
●When the battery system failure warning appears on the
dashboard, pull over and park the vehicle safely, move
to a safe distance from the vehicle and contact your local
authorized service center.
●If anyone in the vehicle is injured, contact the first aid
department in case is necessary.
●If the vehicle is involved in an accident such as a scratch
on the bottom protection cover collision, the internal
structure of the battery may be damaged, posing a
serious safety hazard. Immediately contact your local
authorized service center to check the battery system and
have the damage assessed by authorized repairer.
Important Notes
In case of any of the following situations, please contact your
local authorized service center:
●The vehicle has reached the scheduled mileage or service
life interval for maintenance (refer to the Warranty and
Maintenance Manual).
●The vehicle is damaged in a collision, flood, chassis
scraping, or other accidents.
●One of the serious failure alarms is displayed on the
dashboard, such as battery failure, battery overheating,
motor and controller overheating, electric system failure,
and charging port overheating.

1. Notice to XPENG Owners
8
Intelligent power unit (IPU)
AC charging port Refer to Page 11
CCS/DC-DC converter
Traction battery Refer to Page 9
DC charging port Refer to Page 12
A/C compressor
Drive motor
Warning
●The orange wiring harnesses are
HV ones. It is forbidden to touch
or disassemble any HV wiring
harnesses and related HV parts,
otherwise there is a danger of
electric shock!
EV System Layout

1. Notice to XPENG Owners
1
2
3
4
5
6
7
8
9
10
11
9
Traction Battery
The traction battery is mounted on the chassis of the vehicle.
Be careful with it during driving!
Warning
●The traction battery can generate a high rated voltage up
to 381V, which may cause serious injury or even death to
human body. Please beware of the high voltage danger!
●Only trained technicians are allowed to disassembling,
inspecting, modifying, and repairing the traction battery
and its circuits, as this may lead to electric shock injuries
or even death due to improper operation.
Caution
●Be careful when driving over mud, potholes, curbs,
high and wide speed bumps, sidewalk ramps and
other special roads to avoid scratches or damage to
the traction battery caused by chassis collisions.
●Be careful when driving through deep water to prevent
short circuit, electric leakage or damage of the traction
battery due to excessive contact with water.
●If you perceive that the chassis is scratched or bad
smell come from the traction battery, please stop
driving immediately and contact your local authorized
service center as soon as possible.
Range
The range depends on the state of charge, the vehicle's
mileage and service history, environment temperature, road
conditions, driving habits (air conditioning, driving mode,
energy regeneration level), and the vehicle's payload capacity,
etc.
Traction Battery Environment Temperature
The performance of the traction battery is affected by the
environment temperature. It is required to use the vehicle
within the environment temperature range of -30°C to 55°C to
maintain the good performance of the battery and extend its
service life.
Caution
●Do not keep the vehicle exposed to high temperatures
above 60°C or low temperatures below -40°C for more
than 24h.
Traction Battery Recycling Instructions
If the traction battery needs to be replaced or scrapped, please
contact your local authorized service center for recycling
and disposal. Careless disposal of traction battery will cause
pollution to the environment or safety accidents, and the car
owner should be held responsible.
https://www.automotive-manuals.net

1. Notice to XPENG Owners
10
Charging Instructions
When the state of charge is less than 30% or the charging
reminder light comes on, please charge the vehicle as soon
as possible.
When the vehicle is parked, AC charging, AC discharging or DC
charging can be carried out through the AC/DC charging port
located on the left rear of the vehicle.
Note
●If the power battery of the vehicle is lithium iron
phosphate battery, it is recommended to charge the
power to 100% by fast charging (DC charging) in the
first three times after picking up the vehicle, which is
conducive to the optimal performance of the power
battery. In the subsequent car use process, charge
the battery to 100% at least once every month (there
is no limit on speed charge), which can improve the
accuracy of mileage calculation.
Charging Display
During charging, the charging status is displayed on/by the
following 4 devices:
1. Charging indicator light on exterior rear-view mirror
─Blue light on: ready to charge.
─Green light flashing: charging.
─Green light on: charging completed.
─Red light flashing: charging fails.
2. Dashboard
https://www.automotive-manuals.net

1. Notice to XPENG Owners
1
2
3
4
5
6
7
8
9
10
11
11
The dashboard displays the charging status.
►After the vehicle is locked, the dashboard no longer
displays the charging status.
3. CID
The CID displays charging information. After the vehicle is
locked, the CID will no longer display charging information.
4. Mobile APP.
AC Charging
The long AC charging time is beneficial to battery life.
1. Press the AC charging port cover on the right side of the
vehicle and fully open the AC charging port cover.
►This can only be done when the vehicle is unlocked.
2. Take the charging gun off the AC charging pile and plug it
into the AC charging port vertically.
►Do not shake the charging gun when plugging it.
Caution
●Do not press the switch of the charging gun. Please
plug the charging gun vertically until you hear a
"click", indicating that the charging gun is plugged
in place.
3. Scan the code on the charging pile with your mobile
phone, generate a charging order as instructed, and
activate the pile to start charging.
4. Observe the charging indicator lights. Refer to Page 10.
►If the charging indicator light on the exterior rear-
view mirror flashes in green, it indicates the vehicle
is being charged.
5. After charging is completed, press the "Unlock" button on
the smart key or tap the "Stop Charging" button on the
CID to unlock the charging gun. Then, press the switch
of the charging gun while unplugging the charging gun.
Put it back to the specified position.
https://www.automotive-manuals.net

1. Notice to XPENG Owners
12
Caution
●If the charging gun cannot be unplugged after it
is unlocked, please push the charging gun firmly
in place again, press the unlock button on the key
again or tap the "Stop Charging" button on the CID
to unlock, and then unplug the charging gun again.
Emergency Unlocking
─If the charging gun still cannot be unplugged after several
attempts to unlock, open the engine hood, find the pull
lock in the right, and pull it to unlock. Then unplug the
charging gun.
DC Charging
1. Press the DC charging port cover on the left side of the
vehicle and fully open the DC charging port cover.
►This can only be done when the vehicle is unlocked.
2. Take the charging gun from the DC charging pile and
plug it vertically into the DC charging port.
►Do not shake the charging gun when plugging.
3. Scan the code on the charging pile with your mobile
phone, generate a charging order as instructed, and
activate the pile to start charging.
https://www.automotive-manuals.net

1. Notice to XPENG Owners
1
2
3
4
5
6
7
8
9
10
11
13
4. Observe the charging indicator lights Refer to Page 10.
►If the charging indicator light on the exterior rear-
view mirror flashes in green, it indicates the vehicle
is being charged.
Warning
●DC charging must be carried out in compliance with
the relevant regulations of the charging station.
●The charging interface, communication protocol,
and technical requirements should meet the latest
national standards for charging piles. Please check
if the DC charging pile is CCS2 standard compliant
before charging.
Note
●The charging may be prolonged due to factors such
as environment temperature and traction battery life.
●When charging at a low environment temperature,
the system will heat the traction battery first, and
then charge it when its temperature becomes normal.
So the charging will take a slightly longer time than
normal.
Note
●When the indicator light shows an abnormal charging
warning, try to repeat the charging steps or restart
the whole vehicle. If the abnormal charging warning
persists, please contact your local authorized service
center for troubleshooting.
●The A/C may not work well due to the limited power
for A/C system during AC charging.
●Due to the differences among charging pile
manufacturers in understanding the national charging
standard, as well as the different maintenance levels
of charging piles, there may be cases where the
vehicle cannot be charged using a charging pile.
In case of such situation, please try to plug the gun
again or use another charging pile.
https://www.automotive-manuals.net

1. Notice to XPENG Owners
14
Precautions for Charging
●AC or DC charging can only be performed independently
for a vehicle at any given time. The AC charging gun and
the DC charging gun should not both be plugged in. If
both guns are plugged in, please pull out both guns and
then plug in either one to charge normally.
●Some DC charging piles are compatible with both electric
buses and electric vehicles. When the vehicle is charged
by such DC charging piles, an auxiliary power supply of
12V should be opted for.
●Please ensure the charging port, charging gun, charging
plug, and other devices are dry before charging, and it is
prohibited to charge when the charging devices or your
hands are wet.
●The charging gun cable must be free of twist when charging.
●Charging is prohibited if the charging devices are
corroded or damaged, including damages on the pins of
the charging gun, as well as the deformed and cracked
plastic body of the plug.
●In case of an emergency during charging, press the
"Emergency Stop" button of the charging device to stop
charging.
●It is recommended to stop charging the vehicle during
thunderstorms, because lightning may cause damage to
the charging devices.
●It is recommended to charge the vehicle with a charging
pile in a shady and waterproof shelter, to avoid rain
or snow from splashing into the charging port when
unplugging the charging gun.
●When plugging/unplugging the charging gun, press the
release switch of the charging gun to plug/unplug the
charging gun vertically. Do not shake the charging gun
during such actions.
●If the charging port continuously emits a strong
and irritating smell during charging, stop charging
immediately.
●It is strictly forbidden to allow minors to touch or use the
charging devices.
●If there are foreign objects such as dust or large hard
particles in the metal socket of the charging port,
charging gun, or charging plug, clean such parts after
powering off the whole vehicle and then perform
charging.
●If you have an electronic device implanted in your body,
such as a pacemaker, cardiovascular defibrillator, internal
analgesic pump, insulin pump, or hearing aid, do not stay
in the vehicle or enter the vehicle to take something while
the vehicle is charging, as this may interfere with the
function of your electronic device and result in personal
injury or death.
●Do not disassemble or modify the charging port or
charging cable.
https://www.automotive-manuals.net

1. Notice to XPENG Owners
1
2
3
4
5
6
7
8
9
10
11
15
AC Discharging
AC discharging allows the power stored in the battery to be
output at 220V for external appliances to use.
Perform AC discharging as follows:
1. Open the AC charging port cover.
2. Connect the appliance to the adapter first, then plug the
adapter into the charging port.
►This function allows to connect external electrical
appliances with the maximum power of 2.2 kW.
►When the traction state of charge is less than 20%,
this function will be automatically deactivated.
3. Tap the icon in the CID status bar to enter the
discharge function panel.
4. Confirm that the power supply circuit and electrical
appliance are well connected, and tap the "Start Power
Supply" button to enter the discharging mode; the
current and voltage will be displayed in real time during
discharging; you can stop discharging at any time.
─You can custom the power supply limit, so that the
discharging will automatically stop if the limit is reached.
https://www.automotive-manuals.net

1. Notice to XPENG Owners
16
Warning
●It is strictly forbidden to use this function in case of
any damage of the appliance or the adapter.
●It is strictly forbidden to allow minors to touch or
use the charging device. Keep minors away from the
vehicle when this function is activated.
●In case of abnormal discharging, please deactivate
this function immediately.
●It is strictly prohibited to touch the plug pins of
electrical appliances and adapter jacks.
●It is strictly prohibited to connect counterfeit products,
medical or health electronic devices to the vehicle.
https://www.automotive-manuals.net

17
1
2
3
4
5
6
7
8
9
10
11
2. Pre-Use Preparation (Exterior Equipment)
Front combination light assembly
Refer to Page 51.
Exterior rear-view mirror
Refer to Page 28.
Exterior door handle
Rear combination light assembly
Refer to Page 51.
High brake light
AC charging port Refer to Page 11.
Exterior tailgate button
Refer to Page 23.
DC charging port Refer to Page 12.
Daytime running Lights
Front tow hook
Appearance Introduction
https://www.automotive-manuals.net

2. Pre-Use Preparation (Exterior Equipment)
18
Bluetooth Key
Bluetooth Car Control
Bluetooth key can be used to unlock the vehicle like the
smart key. Even if there is no mobile network, it is still able to
communicate with the vehicle via Bluetooth. In addition, it can
also be used to control the vehicle parts (such as the trunk,
windows, locks).
Compatibility Description
Mobile operating systems supported: Android 7.0 and iOS 9.0
or above. It is recommended to use phone models released
after 2017.
Bluetooth protocol: To ensure a senseless unlocking/locking
experience, Bluetooth 5.0 and above are recommended.
Creating a Key
Please tap "Create a Bluetooth key"on the Bluetooth car
control interface or digital key management interface. This
operation works only when the vehicle is connected to the
network. Please follow the instructions: lock the vehicle →
connect to network →pass the security authentication and
generate an encrypted digital key.
Sharing the Key
The Bluetooth key can be remotely shared with up to 5 users.
(method: Vehicle Control →Digital Key Management →Vehicle
Authorization →Add Account). An authorized account will be
granted the same key and basic vehicle control permissions
after creating a Bluetooth key.
Description
1. Bluetooth key start
─When you approach the vehicle with mobile phone,
the vehicle will establish the connection if detecting
the Bluetooth signal, and then the "Bluetooth Key Start"
button on the Bluetooth Vechicle control interface will
be activated.
2. Auto locking/unlocking
─Based on the Bluetooth signal intensity of the mobile
phone connected to the vehicle, locate the key and
vehicle, and perform locking, unlocking or starting
depending on the location.
─The function is only available for calibrated models. For
calibrated models, please tap "Bluetooth Key Settings →
Auto Lock/Unlock →[i]".
─Then the doors will auto unlock when approaching and
lock when leaving. At the same time, your phone will
vibrate to remind you. It is recommended to turn on the
vibration function.
https://www.automotive-manuals.net

2. Pre-Use Preparation (Exterior Equipment)
1
2
3
4
5
6
7
8
9
10
11
19
Note
●To use the Bluetooth key, be sure to keep the phone
on and turn on Bluetooth. Please pay attention to the
phone battery, some phones will disable Bluetooth
when the battery is low.
●The Bluetooth connection range is usually within 20-
30m, but there are differences in sensitivity due to
the Bluetooth of the mobile phone, and obstacles
between the bluetooth device and the car. If
unlocking/locking fails, please open App to start/lock
the vehicle through the Bluetooth key.
https://www.automotive-manuals.net
Table of contents
Other XPENG Automobile manuals