XROCKER XR Racing User manual

USER MANUAL

CONTENTS
ENGLISH 1 - 14
FRENCH 15 - 28
DEUTSCHE 29 - 42
ESPAÑOL 43 - 56
NEDERLANDS 57 - 70
ITALIANO 71 - 84

What’s in the box
Thank you for choosing X Rocker product and supporting brand.
Please read the manual carefully before using.
1. Compatible with PC/PS3/PS4/XBOX ONE/SWITCH.
2. Intelligent dual-core for two modes of X-input and D-input on PC.
3. Buttons are programmable according to your preference.
4. Switch between 270 and 900 rotation output.
5. Supports headset function on PS4/XBOX ONE.
6. Built-in double vibration motors provides Haptic feedback for a
realistic gaming experience.
7. Racing Wheel with ergonomic grip design.
Product Features
-1-
ENG

-2-
Button ENG

- 3 -
Supports Platforms: PC/PS3/PS4/XBOX ONE/SWITCH PC System:
Windows 7/8/10
Attach Foot Pedal and USB cables as shown above
System Requirements
Installation
USB Port
Pedal
Audio
USB Cable
ENG

-4-
Mounting Clamps
Racing Wheel is equipped with a clamping system for mounting to a table.
Step. 1 - Place the Suction cap onto XR Racing wheel, then twist to lock.
Step. 2 - Rotate clamp knobs anti-clockwise to loosen clamps.
Step. 3 - Slot and click the mounting clamps into the wheel’s mounting cavity.
Step. 4 - Mount the Racing Wheel to a table and then rotate clamp knobs
clockwise to tighten clamps.
ENG

-5-
PC Connection Guide
Press “MODE” for 3 seconds
X-INPUT D-INPUT
Switch MODE between X-input and D-input.
The XR Racing Wheel isdefaulted to X-input mode when ˎrst
connected to the PC and is further indicated with a Green LED.
X-Input Mode
X-input MODE is compatible with most post 2005 modern Racing
titles on PC and features plug and play compatibilty.
D-Input Mode
D-input MODE is compatible with earlier pre 2005 Racing titles on PC
and may require conˎguration within the game software.
ENG

-6-
Playstation 4 Connection Guide
Step 1. - Power off PS4 Dualshock 4 controller.
Step 2. - Connect your Dualshock 4 controller to the XR Racing Wheel.
Step 3. - Plug the XR Wheel USB into a free socket on your PS4 system
Step 4. - Press “Mode” on the XR Racing Wheel to start using the wheel.
Diagram of PS4 Connection
ENG

-7-
XBOX ONE Connection Guide
Step 1. - Power off your official XBOX ONE controller.
Step 2. - Connect your XBOX ONE controller to the XR Racing Wheel.
Step 3. - Plug the XR Wheel USB into a free socket on your XBOX ONE
system.
Step 4. - Press “Mode” on the XR Racing Wheel to start using the wheel.
Diagram of XBOX ONE Connection
ENG

-8-
Nintendo Switch Connection Guide
- Enter System Settings Controllers and Sensors, select Pro Controller
Wired Communication. Select the option state to ON.
Connect With Switch Console (Tabletop Mode)
Step 1. - Connect a USB-C OTG Adaptor (not included) with the USB of
Racing Wheel.
Step 2. - Connect the USB main cable of the XR Racing
Wheel to Switch Console.
Step 3. - Power on Switch console to play.
Connect With Switch Dock
Step 1. - Connect Nintendo Switch to the Switch dock.
Step 2. - Plug the USB of the XR Racing Wheel into Switch dock and
power on Switch Console.
ENG

-9-
Sensitivity Setting
Customize maximum effective turn radius
High sensitivity:
Press the “SHARE”+”OPTIONS” Button, when the Green LED ːashes quickly,
press the D-pad “ “ button. To increase (Default Setting)
Medium sensitivity:
Press the “SHARE”+”OPTIONS” Button, when the Green LED ːashes quickly,
press the D-pad “ “ button.
Low sensitivity:
Press the “SHARE”+”OPTIONS” Button, when the Green LED ːashes quickly,
press the D-pad “ “ button.
Max effective turn radius
For example, the Racing Wheel maximum effective turn radius is set to
180 . The actual maximum turn radius is achieved when moving 90
the left or right, and the rotation exceeding 90
How to Setting?
Step 1 . - Switch to 900
Step 2. - Press the “SHARE”+”OPTIONS” button, the Green LED ːashes quickly.
Step 3. - Move the Racing Wheel to the desired angle (more than 60
press the “OPTIONS” button, the Green LED will keep on.
ENG

-10-
Programmable Buttons Function
Setting Buttons: L-paddle, R-paddle,
Buttons can be programmed : A, B, X, Y, L1, L2, R1, R2
How to set programmable button
Step 1. - Press
“SHARE”+”OPTIONS” , Green LED light ːashes quickly.
Step 2. - Press setting button,
Green LED light ːashes slowly.
Step 3. - Press a programmable button while the
Green LED is on and then
this will save the button choice.
How to set programmable button
Clear single button
Step 1. - Press
“SHARE”+”OPTIONS”, Green LED light ːashes quickly.
Step 2. - Press setting button twice, The
Green light will show and then the
program is cleared.
Clear all buttons
Step 1. - Press
“SHARE”+”OPTIONS”, Green LED ːashes quickly.
Step 2. - Press the “OPTIONS” button for 4 seconds, the
Green
LED will turn
on, all the programmed buttons will be restored including
sensitivity.
ENG

-11-
Voice Communication Function
The Racing Wheel supports to connect with the headset and micro -
phone, allowing player to connect headset for voice communication on
PS4/XBOXONE console.
Notes
1. Press “SHARE”+”OPTIONS” button, the Green LED ːashes quickly, and
then press the “SHARE”+”OPTIONS” button again to exit programming.
change.
2. Press “SHARE”+”OPTIONS” button, the Green LED ːashes quickly. If there
is no action at this time, the programming will automatically exit after 10
seconds.
Diagram of Headphone Connection
The previous data does not
ENG

-12-
User Safety Information
• Avoid direct contact with liquids. To clean, wipe with a damp cloth. If a
spillage occurs, switch off the XR Wheel and wait for the product to dry
before reusing.
• Do not use any type of abrasive pad or abrasive cleaning solutions as these
may damage the surface material.
• Please consult X Rocker Support before unscrewing and disassembling any
of the electrical components or undertaking any changes to the product.
If any unauthorised modifications or repairs are made before consultation,
then this will void your warranty.
• To reduce potential trip or entanglement hazards, arrange and secure any
cables so that people and pets are not likely to trip over or accidently pull on
them as they move around or walk through the area.
• If any of the cables or electrical equipment become damaged in any way,
stop using immediately and contact X Rocker for more details on how to
replace the component.
• When not in use, keep cables and power supplies out of reach of children,
please also ensure that these are not subject to harsh impacts such as
dropping or throwing the components.
• Never place any type of candle or naked flame on or near the XR Wheel
at any time. While X Rocker products are compliant with UK and European
safety regulations, prolonged exposure to naked flames will result in dam-
age to the product and other safety hazards.
ENG

-13-
Product Specification
Mode No. XR RACING PRO
Connection USB Wired
Working Current 80mA-500MA
Packing Size Appr. 325*302*295*mm
Product Size Appr. 280*340*295mm
Net Weight Appr. 3280g
Application Temperature 10 - 400C
Application Humidity 20 - 80%
ENG

-14-
Button Mapping:
ENG

Qu’y a-t-il dans la boite
Merci d’avoir choisi le produit X Rocker et la marque de soutien.
Veuillez lire attentivement le manuel avant de l’utiliser.
Volant de course Pédale Ventouse Manuel
Pinces de
montage
1. Compatible avec PC / PS3 / PS4 / XBOX ONE / SWITCH.
2. Dual-core intelligent pour deux modes d’entrée X et d’entrée
D sur PC.
3. Les boutons sont programmables selon vos préférences.
4. Basculez entre la sortie de rotation 270⁰ et 900⁰.
5. Prend en charge la fonction casque sur PS4 / XBOX ONE.
6. Les moteurs à double vibration intégrés fournissent un retour
haptique pour une expérience de jeu réaliste.
7. Volant de course avec poignée ergonomique.
Caractéristiques du produit
-15-
FR

-16-
Bouton
CROIX
DIRECTIONNELLE
PARTAGER LES OPTIONS
Pédale d’accélérateur
Pédale de frein
Changement d’angles
FR

-17-
Prise en charge des plates-formes: PC / PS3 / PS4 / XBOX ONE /
SWITCH PC System: Windows 7/8/10
Fixez la pédale et les câbles USB comme indiqué ci-dessus
Configuration requise
Installation
USB Port
Pedal
Pedal
Audio
Audio
Audio
Cable USB
l’audio
Pédale
Port USB
FR

-18-
Pinces de montage
Racing Wheel est équipé d’un système de serrage pour le montage sur une table.
Étep. 1 - Placez le capuchon d’aspiration sur la roue XR Racing, puis tournez pour verrouiller.
Étep. 2 - Tournez les boutons des pinces dans le sens antihoraire pour desserrer les pinces.
Étep. 3 - Insérez et cliquez les pinces de montage dans la cavité de montage de la roue.
Étep. 4 - Montez le volant sur une table, puis tournez les boutons de serrage dans le sens
des aiguilles d’une montre pour serrer les brides.
FR