Xycom SBC-370 User manual

SBC-370
SINGLE BOARD COMPUTER - SOCKET 370 CELERON
Board Processor Guide

Brand or product names are trademarks or registered trademarks of their respective owners.
Windows and Windows NT are registered trademarks of Microsoft Corp. in the United States and other countries.
This document is copyrighted by Xycom Automation, Incorporated (Xycom Automation) and shall not be reproduced or
copied without expressed written authorization from Xycom Automation.
The information contained within this document is subject to change without notice. Xycom Automation does not guaran-
tee the accuracy of the information.
Precautions
Some components on SBC-370 are very sensitive to static electric charges and can be damaged by a sudden rush of power.
To protect it from unintended damage, be sure to follow these precautions:
Ground yourself to remove any static charge before touching the SBC-370. You can do this by using a grounded wrist strap
at all times or by frequently touching any conducting materials that are connected to the ground.
Handle your SBC-370 by its edges. Don't touch IC chips, leads, or circuitry if not necessary.
Do not plug any connector or jumper while the power is on.
Do not put your SBC-370 unprotected on a flat surface because it has components on both sides.
BATTERY REPLACEMENT CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's instructions.
2

Table of Contents
1. Features. . ..............................6
Overview ..................................................6
Feature List .................................................6
CPU...................................................6
SDRAM .................................................6
AGP VGA Controller...........................................7
Ethernet Controller ...........................................7
Ultra DMA/33 Enhanced PCI EDI Interface ...............................7
Multi-I/O Chip .............................................7
Floppy Disk Drive Interface .......................................7
Two High Speed Series Ports.......................................7
Parallel Port ...............................................7
Hardware Monitoring System ......................................8
IrDAPort................................................8
USBPort.................................................8
ISAPLUS™ ................................................8
E22Key..................................................8
Watchdog Timer.............................................8
Flash Disk - DiskOnChip™........................................8
ATX Power Supply Function .......................................8
Mouse and Keyboard Connector ....................................8
Power Consumption ...........................................9
Operating Humidity ...........................................9
Watchdog Timer ...............................................9
E2Key™ Function..............................................10
Connecting to an ATX Power Supply ....................................11
2. Board Configuration .........................12
Board Layout ................................................12
Jumpers ..................................................13
CPU Frequency Setting (JP3) ......................................13
CPU Multiplier Setting (JP8) ......................................13
Watchdog Timer Type Setting (JP5) ..................................13
Watchdog Timeout Period (JP12)....................................14
DiskOnChip™ Memory Address Setting (JP11) .............................14
Clear CMOS Setup (JP4) ........................................14
PS/2 Mouse Setting (JP7) .......................................15
Connectors .................................................16
Floppy Disk Drive Connector (CN2) ..................................16
PCI E-IDE Disk Drive Connector (CN1/CN3) ..............................17
Parallel Port (CN4) ...........................................18
Serial Ports (CN12/CN11) .......................................19
Keyboard/Mouse Connector (CN8/CN17/CN18) ...........................20
External Switches and Indicators (CN7) ................................21
USB Port Connector (CN9) .......................................21
IrDA Infrared Interface Port (CN6) ...................................22
VGA Connector (J1) ..........................................22
3

LAN RJ45 Connector (CN10)......................................23
LED Connector for LAN (CN5) .....................................23
Fan Connector (CN13/CN14/CN15) ..................................23
System Interrupts (IRQs) ..........................................24
DMA Channel Assignments ........................................24
1st MB Memory Address Map .......................................25
I/OMap..................................................25
3. BIOS Setup Menus..........................28
Getting Started ...............................................28
Standard CMOS Setup ...........................................29
Advanced CMOS Setup ..........................................30
Advanced Chipset Setup ..........................................32
Power Management Setup .........................................34
PCI/PLUG AND PLAY Setup ........................................35
Peripheral Setup ..............................................36
Hardware Monitor Setup ..........................................38
Change Supervisor/User Password .....................................39
Auto-Detect Hard Disk ...........................................39
Auto Configuration with Optimal Settings .................................40
Auto Configuration with Fail Safe Settings .................................41
Save Settings and Exit ...........................................41
Exit Without Saving ............................................41
4

1Features
OVERVIEW
The Intel® Socket 370 Celeron® with AGP VGA and 10/100Mbps Ethernet Single
Board Computer(SBC-370) is a PICMG bus form factor board. It is equipped with a
high performance Intel® Celeron processor (up to 466 MHz) and advanced high per-
formance multi-mode I/O.
This board has a built-in DiskOnChip™(DOC) Flash Disk for embedded applications.
The DOC Flash Disk is 100% compatible to hard disk. Users can use any DOS command
without any extra software utility. The DOC currently is available from 8 MB to 288 MB.
An advanced high performance super AT I/O chip - Winbond W83977TF is used in the
SBC-370 board. The on-chip UARTs are compatible with the NS16C550. The parallel
port and IDE interface are compatible with IBM PC/AT architecture.
SBC-370 uses the advanced Intel 440BX Chipset which is 100% ISA/PCI compatible
chipset with PCI 2.1 standard.
FEATURE LIST
CPU
•Intel Celeron® processor up to 466 MHz
•PICMG bus, meets PCI 2.1 standard
•7 DMA channels
•15 Interrupt levels
•Intel 82440BX 66/100MHz CPU Clock Chipset
SDRAM
•Four 168-pin DIMM sites support up to 1 GB SDRAM
•Each DIMM module is 3.3 V SDRAM with a maximum of 256 MB.
6