PI00062, REV G, 10/12, 5192.5000
YA SERIES
Yagi Directional Antennas
YA SERIES
The YA Series is built to precise specifications to perform in harsh weather
conditions. Mounting hardware is supplied for attachment to any pole or
pipe up to 3” diameter. Stacking kits are available to boost gain.
INSTALLATION INSTRUCTIONS
PRE-INSTALLATION
• LarsenYagisaredesignedtomount
vertically.
• YA3Series(UHF):Gammarodmust
be facing down for weather consider-
ations(seeFigure1).
• YA5andYA6Series:The
insulated side of the driven ele-
mentshouldbefacingup(see
Figure2).
HOWTOINSTALL
1. Remove mounting hardware.
2. AssembleU-bolt(s)to“pipeclamp”bracket.
3. Insert bolts into mounting holes at the end of the Yagi.
4. Place flat washer on bolts, followed by the lock washer and hex nut.
5. Slide unit onto pipe/mast.
6. Tighten bolts securely.
7. Attach coax cable. Dress the cable along boom to the rear and secure
with tie wraps or tape.
DANGER-ANTENNACONTACTWITHHIGHVOLTAGEWIRESMAYRESULTINDEATH
Pulse warrants to every user of a Larsen prod-
uct that it will perform to its specified ratings
and will be free of defects in materials and
workmanship.
Pulse will repair or replace without charge
any Larsen product which fails to meet this
warranty within one year of the purchase
date. Excluded is failure due to misuse such as striking objects,
improper installation, and use beyond specifications.
Pulse will not be responsible for any incidental or consequential
damages due to failure of a Larsen product under this warranty or
any implied warranty.
Larsen®, Kulrod®and Kulduckie®are registered trademarks of Pulse Electronics.
Kulglass®Series U.S. Patent #4,764,773; KGB Series U.S. Patent #5,099,252; #5,155,494 - 11/99
LARSEN - A Pulse Brand
3611 N.E. 112th Avenue
Vancouver, Washington 98682
Phone: 800-268-3662
360-944-7551
Fax: 360-944-7556
www.larsen-antennas.com
Gamma Rod
Figure 1
Insulated
Side
Figure 2
PI00062, REV H, 04/19, 5192.5000
