Yamaha SPM-K30 User manual

SPM-K30
WALL MOUNT BRACKET
SUPPORT MURAL
デジタルサウンドプロジェクター壁掛け金具
Installation Manual
Manuel d’installation
Installationsanleitung
Instllationsanvisningar
Manuale d’installazione
Manual de instalación
Installatiehandleiding
Руководство по установке
取付説明書
English Français Deutsch Svenska Italiano Español
Nederlands
Русский 日本語
©
2007 All rights reserved.
Printed in Malaysia WK82320
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
00_cv_SPM-K30.fm Page 1 Friday, June 15, 2007 6:46 PM

i
DIMENSIONS
DIMENSIONS
ABMESSUNGEN
MATTSKISSER
DIMENSIONI
DIMENSIONES
AFMETINGEN
Га ба риты
各部の寸法
Large wall mount bracket
Grand support mural
Große Wandhalterung
Stort väggmonteringsfäste
Staffa di installazione a muro grande
Soporte de montaje en pared grande
Grote wandbevestigingsbeugel
Большой кронштейн настенного крепления
壁掛け金具（大）
SPM-K30
YSP-800/
YSP-900
92
112
630
72.5 102.5
4- 7
23- 7x22
102.5 132.5
132.5 162.5
162.5 192.5
192.5 222.5
222.5 252.5
252.5 282.5
282.5 305
72.5 102.5
102.5 132.5
132.5 162.5
162.5 305
282.5
85 85
13.328.7
305
305
(mm)
1.4kg
■YSP-800/YSP-900
SPM-K30
YSP-3000/
YSP-30D/
YSP-3050/
HYT-7030
92
112
670
92.5 122.5
4- 7
24- 7x22
122.5 152.5
152.5 182.5
182.5 212.5
212.5 242.5
242.5 272.5
272.5 302.5
302.5 325
92.5 122.5
122.5 152.5
152.5 182.5
182.5 325
302.5
65 65
12.629.4
325
325
1.4kg
■YSP-3000/YSP-30D/YSP-3050/HTY-7030
(mm)
00_size_SPM-K30.fm Page i Friday, June 15, 2007 6:48 PM

ii
Small wall mount bracket
Petit support mural
Kleine Wandhalterung
Litet väggmonteringsfäste
Staffa di installazione a muro piccola
Soporte de montaje en pared pequeño
Kleine wandbevestigingsbeugel
Малые кронштейны настенного крепления
壁掛け金具（小）
SPM-K30
YSP-4000/
YSP-40D/
HTY-7040
92
112
730
102.5 152.5
4- 7
24- 7x22
152.5 182.5
182.5 212.5
212.5 242.5
242.5 272.5
272.5 302.5
302.5 332.5
332.5 355
122.5 152.5
152.5 182.5
182.5 212.5
212.5 355
312.5
150 150
2263
355
355
1.4kg
■YSP-4000/YSP-40D/HTY-7040
(mm)
78
M6TAP
2- 4.5x6.5
2- 4.5
22 26
102.9
116.9
30
15
16.9
16.9 M6TAP
2- 4.5x6.5
30
15
24 24
102.9
128
68
2- 4.5
6.2x8
6.2
0.1kg x 2 0.1kg x 2
■A■B
(mm)
(mm)
00_size_SPM-K30.fm Page ii Friday, June 15, 2007 6:48 PM

iii
Unit with bracket
Le système avec son support
Einheit mit Halterung
Ljudprojektorn med fästet
Unità con staffa
Unidad con ménsula
Toestel met de beugel
Аппарат с кронштейном
取付時の寸法
19
134
19
171
■YSP-800/YSP-900 ■YSP-3000/YSP-30D/YSP-3050/HTY-7030
(mm)
(mm)
23
167
■
YSP-4000/YSP-40D/HTY-7040
(mm)
00_size_SPM-K30.fm Page iii Friday, June 15, 2007 6:48 PM

SPM-K30
En 1
English
WALL MOUNT BRACKET
SPM-K30
Installation Manual
Thank you very much for purchasing the Wall Mount Bracket SPM-K30. Be sure to read this manual thoroughly before
using this bracket. After you have read this manual, retain it for future reference.
SAFETY INSTRUCTIONS
• Always follow the instructions set forth in this manual when installing the Digital Sound Projector
using this bracket.
Improper or inadequate installation could cause the Digital Sound Projector to fall, resulting in personal injury.
• The installation must be secure enough to bear the weight of the Digital Sound Projector, the wall
bracket and other hardware indefinitely, and must also be secure enough to withstand vibrations.
Improper or inadequate installation could cause the Digital Sound Projector to fall, resulting in personal injury.
• To ensure safety, all screws must be tightened securely.
Loose screws could cause the Digital Sound Projector to fall, resulting in personal injury.
• Make sure to leave adequate ventilation space around the unit to allow heat generated by the Digital
Sound Projector to dissipate.
Failure to provide adequate space around the unit could cause the Digital Sound Projector to overheat internally,
resulting in a fire.
• Never hang from the Digital Sound Projector or the wall bracket.
Hanging from the Digital Sound Projector or the wall bracket could cause the Digital Sound Projector or the wall
bracket to fall, resulting in personal injury.
• Once the Digital Sound Projector is installed, safety checks should be conducted on a regular
basis.
If the Digital Sound Projector is used over an extended period of time, screws can become loose and the installation
can become weaker due to the passage of time, vibrations, etc.
When installing the Digital Sound Projector using this bracket, all installation work must be
performed by a qualified contractor or dealer personnel. The customer must never attempt to
perform this installation work. Improper or inadequate installation could cause the Digital Sound
Projector to fall, resulting in personal injury.
01_EN_SPM-K30.fm Page 1 Monday, June 18, 2007 5:59 PM

ACCESSORIES
En 2
Check that all of the following parts are included.
Prepare at least six sets of commercially available tapping screws ( 4 mm, 25 mm or more in length)
and washers in addition to the accessories shown above.
ACCESSORIES
Small wall mount brackets
(Type A) (x2)
Projector mounting screws
(M6, 16 mm) (x6)
Safety wires (x2)
Length 300 mm
Large wall mount bracket (LEFT) (x1)
Projector mounting screws
(M4, 10 mm) (x10)
Small wall mount brackets
(Type B) (x2)
Large wall mount bracket (RIGHT) (x1)
Washers (for M6, 16 mm of
outer circumference) (x4)
Note
01_EN_SPM-K30.fm Page 2 Monday, June 18, 2007 5:59 PM

ASSEMBLING PROCEDURE
En 3
English
The dimensions after assembling the parts vary depending on the type of the Digital Sound Projector. Check the positions
of the screw holes before assembling the parts.
ASSEMBLING PROCEDURE
YSP-800, YSP-900
YSP-3000, YSP-30D, YSP-3050, HTY-7030
C
C
630 mm
Projector mounting
screws (M4)
(supplied)
B
B
670 mm
Projector mounting
screws (M4)
(supplied)
01_EN_SPM-K30.fm Page 3 Monday, June 18, 2007 5:59 PM

En 4
ASSEMBLING PROCEDURE
YSP-4000, YSP-40D, HTY-7040
A
A
730 mm
Projector mounting
screws (M4)
(supplied)
01_EN_SPM-K30.fm Page 4 Monday, June 18, 2007 5:59 PM

INSTALLATION PROCEDURE
En 5
English
Make sure to leave adequate ventilation space around the unit and follow the instructions below. The illustrations used in
each step are the examples of YSP-800 and YSP-900.
In order to secure the unit to the wall, you will need to attach the bracket to the wall first in a manner befitting the
structure and quality of the wall.
Choose a location where the wall can bear the weight of the whole unit.
Before installing the bracket, make sure of the size (see “DIMENSIONS” on the first page of this manual).
Choose a secure wall or beam to fasten the screws. Do not install them into walls made of weak
material that can easily come off, such as mortar or plywood wall panels. Loose screws could cause
the projector to fall, resulting in personal injury.
If the metal apparatuses are attached to the rear panel of your Digital Sound Projector, detach them from the rear left and
right sides. If the metal apparatuses are not attached to the rear panel of your Digital Sound Projector, proceed to step 3.
INSTALLATION PROCEDURE
1 Attach the large wall mount bracket to the wall.
Washer
(commercially
available)
4 mm Tapping Screw (commercially available)
In order to secure the unit to the wall, drive six (or more) tapping
screws from the outside through the holes in the wall mount bracket.
Installing into a dry
wall
Installing directly
into a wall, etc.
25 mm or more 25 mm or more
Beam, etc. Dry wall
Installation example
Note
2 Detach the metal apparatuses from the Digital Sound
Projector. (Some models of YSP-800 only)
Metal
apparatus
Metal
apparatus
01_EN_SPM-K30.fm Page 5 Monday, June 18, 2007 5:59 PM

INSTALLATION PROCEDURE
En 6
The small wall mount brackets vary depending on the type of the Digital Sound Projector. Refer to the following table for
details on the type of the Digital Sound Projector and the compatible small wall mound brackets (Type A or B).
Use supplied projector mounting screws (M6 x 4 for YSP-4000, YSP-40D or HTY-7040 and M4 x 8 for other models) to
securely attach the two small wall mount brackets to the rear left and right sides of the Digital Sound Projector.
• In the unit of the model that the metal apparatuses are not attached, there are felt covers in the
holes. In this case, tighten the screws to puncture the felt covers.
• If you tighten the screws on the slant, the screw threads in the projector might be broken.
Be careful when using electric tools.
3 Attach the small wall mount brackets to the Digital Sound
Projector.
Projector mounting
screws (M4)
(supplied)
Digital Sound Projector
Small wall mount bracket
(Type A)
Digital Sound
Projector
Small wall
mount bracket
YSP-800
YSP-900 Type A
YSP-3000
YSP-30D
YSP-3050
HTY-7030
YSP-4000
YSP-40D
HTY-7040
Type B
Attach the brackets to the rear left and
right sides of the Digital Sound Projector.
■YSP-800/YSP-900
■YSP-4000/YSP-40D/HTY-7040
Projector mounting
screws (M6)
(supplied)
Digital Sound Projector
Small wall mount bracket
(Type B)
Rear View
■YSP-3000/YSP-30D/HTY-7030/
YSP-3050
Rear View Rear View
Digital Sound Projector
Projector mounting
screws (M4)
(supplied)
Small wall mount bracket
(Type B)
Notes
01_EN_SPM-K30.fm Page 6 Monday, June 18, 2007 5:59 PM